Aerial AM Cementitious 3D print using a custom-built drone with a delta-arm manipulator.
(Image: Aerial Robotics Lab, Imperial college)
Researchers including Weitzman’s Robert Stuart-Smith have made a swarm of bee-inspired drones that can collectively 3D print material while in flight, allowing unbounded manufacturing for building and repairing structures.
The advent of 3D printing has changed many industries by allowing researchers, students, entrepreneurs and massive factories to rapidly transform a digital design into a tangible object. Through a collaboration with researchers at the University of Pennsylvania and the Imperial College London, Empa researchers have created a swarm of bee-inspired drones that can collectively 3D print material while in flight, allowing limitless manufacturing for building and repairing structures.
3D printing is increasingly being used within the construction industry. However, challenges to its deployment include that the machines are confined to construction capabilities based on their size and ability to be transported.
This novel approach to 3D printing addresses these challenges by using flying robots, also known as drones, and utilizes collective building methods inspired by natural cooperative builders like bees and wasps. The drone fleet, known as Aerial Additive Manufacturing, works cooperatively from a single blueprint, adapting its techniques as it goes. They are fully autonomous while flying but are monitored by a human controller who checks progress and intervenes, if necessary, based on the information provided by the drone.
The project emerged from a longstanding collaboration between the University of Pennsylvania’s Robert Stuart-Smith, an assistant professor of architecture in the Stuart Weitzman School of Design and Penn Engineering GRASP Lab Affiliate Faculty, and Mirko Kovac, a professor at Imperial College London and the Swiss Federal Laboratories of Materials Science and Technology, who had both been pursuing pilot research around the topic. The pair’s project was developed over several years by an interdisciplinary team of researchers led by Kovac together with Stuart-Smith and co-investigators Stefan Leutenegger, Vijay Pawar, Richard Ball, Chris Williams, and Paul Shephard, along with their research teams at Penn, Imperial College, University College London, University of Bath, Queen Mary University of London, and Technical University of Munich.
“It is exciting research with potential to impact the way we build in hard-to-access, dangerous, or challenging height location areas, like tall buildings and bridges,” says Stuart-Smith. “While this work is at an early proof-of-concept stage, its approach to distributed, adaptive manufacturing aligns to an exciting trend in construction and new opportunities for building design.”
The team’s work is the subject of a recent paper in Nature, “Aerial additive manufacturing with multiple autonomous robots.”
Moving forward, the researchers will work with construction companies to validate their developed solutions and provide repair and manufacturing capabilities. They believe the technology will provide significant cost savings and reduce risks compared to traditional manual methods. “At Penn,” continues Stuart-Smith, “we are currently developing building design solutions that leverage this construction approach as we continue to collaborate with our colleagues in London and Switzerland, and in dialogue with industrial partners who are interested in furthering the capabilities of this research.”
Original Article: 3D printing drones work like bees to build and repair structures while flying
More from: University of Pennsylvania | Imperial College London | Swiss Federal Laboratories for Materials Science and Technology | University of Bath | Queen Mary University of London | Technical University of Munich
The Latest Updates from Bing News
Go deeper with Bing News on:
Aerial additive manufacturing
- 12 types of technology that can make jobsites safer
Innovations such as wearables, drones and predictive analytics help improve hazard detection and incident prevention.
- New Study Simulates 3D Printing with UAV Swarms
3D printing is the act of intelligently depositing or solidifying material in an additive sequence to gradually build up an object. This is done using a variety of processes, including dropping ...
- Leading Turkish arms makers look to forge new deals at Malaysia show
Leading Turkish defense companies, including Turkish Aerospace Industries' (TAI) engine manufacturing subsidiary and missile developer Roketsan, ...
- HEART/NSTA Trust boosting investment in robotics training
Managing Director or HEART Dr. Taneisha Ingleton says they are now offering programmes like autonomous robotics, aerial robotics and additive manufacturing with a focus on 3D printing, at the HEART ...
- The Dada Era of Internet Memes
In some ways, the Donghua Jinlong memes are of a piece with previous generations of Internet humor that proliferated on social platforms. As with, say, LOLcats in the mid-two-thousands, the appeal of ...
Go deeper with Bing News on:
3D printed construction
- The walls of this $130,000 3D printed home were built in 18 hours — see what it's like inside
Portugal-based startup Havelar says it can build a new home in two months. The walls of its new two-bed home were printed in 18 hours.
- Camhirst Robots Introduces Innovative 3D Construction Printing Technology in Greater Manchester to Address Global Housing Shortage
the company is poised to revolutionize global home construction with its advanced 3D Construction Printing Robots. Adam Ahmed Camhirst CEO with Ambassadors from Mexico, outside Camhirst Robots head ...
- 3D Printing Finds a Home
“Prefabricated 3D printed homes reduce the amount of labor required to build a home, thereby making homes safer, potentially cheaper, and much faster from design to completion,” says Buff López, an ...
- Combatting Homelessness and Climate Change Through 3D-Printed Homes
The building and construction sector is the biggest culprit in the climate crisis. The construction industry uses over 3 billion tons of raw materials, ...
- Crafting Programmable Living Materials With Synthetic Biology & 3D Printing
New study uses 3D printing and genetically modified plant cells to create complex, self-repairing materials that could revolutionize biomanufacturing and construction. Scientists are harnessing cells ...