A new brick in the Great Wall
ALTHOUGH it is the weekend, a small factory in the Haidian district of Beijing is hard at work. Eight machines, the biggest the size of a delivery van, are busy making things. Yet the factory, owned by Beijing Longyuan Automated Fabrication System (known as AFS), appears almost deserted. This is because it is using additive-manufacturing machines, popularly known as three-dimensional (3D) printers, which run unattended day and night, seven days a week.
The printers require an occasional visit from a supervisor to top them up with the powdered materials they use as their “inks”, or to remove a completed item, but apart from that they can be left on their own. They build up the objects they are making one layer at a time, as the ink is sintered into place with a laser in a way that creates little waste and can make shapes impossible to achieve using the traditional “subtractive” technology of lathes, milling machines and cutting tools.
Though it is not yet ready for use in mass production (building things up is slower than trimming them down), 3D printing is excellent for making prototypes, customised jobs and short production runs, for there is no need to retool each time the specification changes. All that need be done is to alter the software that controls the print heads.
Western countries led the development of 3D printing, and the technique has been praised by Barack Obama as a way to revive America’s manufacturing industries. It may yet do so. But the extent to which that revival will be brought about by the return to America of production which has migrated to countries like China is harder to predict—for China has plans of its own.
Keep your powder dry
At the moment AFS is in the prototyping business. Its customers are mainly aerospace firms and vehicle-makers that need experimental designs turned into metal quickly. The powders in its machines’ hoppers are plastics, waxes and foundry sand. The results are sent off to foundries, where they are used to make moulds for the sand-casting of metal objects.
According to William Zeng, AFS’s deputy general manager, all the parts needed to make a prototype car engine can be printed and cast in this way in under two weeks. A conventional machine shop would need several months to do that—not least because many of the components would have to be made by hand.
AFS also has a second line of business. It sells the laser-sintering printers it makes to others, for this is a rapidly growing industry. And some of its machines, which cost up to 1.5m yuan (about $250,000), can do more than just sinter plastics, wax and sand; they can sinter metals directly.
Indeed, one of the country’s largest 3D printers (though it was not made by AFS) does just this. It is 12 metres long and it belongs to the National Laboratory for Aeronautics and Astronautics at Beihang University. Wang Huaming, the laboratory’s chief scientist, told a digital-manufacturing seminar organised recently by the Laboratory of High Performance Computing, a government research institute, that this behemoth is being employed to make large and complex parts for China’s commercial-aircraft programme, which plans to build planes to rival those turned out by Airbus and Boeing.
These parts include titanium fuselage frames and high-strength steel landing-gear—objects that require the metal they are made from to be free of flaws which might cause them to fail. Printing such things, rather than making them from precast metal, will be a technical tour de force, and Dr Wang’s team is therefore working on the tricky problem of controlling the recrystallisation of metals after they have been melted by the laser.
The Latest Bing News on:
Additive manufacturing
- Manufacturing Solutions Ireland 2024: A Day of Innovation and Insighton April 26, 2024 at 12:46 pm
Manufacturing Solutions Ireland is once again set to captivate the precision engineering community with its annual event, set to take place on June 12th at a new cutting-edge location - TUS ...
- GE Additive rebrands as Colibrium Additive, retires Concept Laser and Arcam brandingon April 26, 2024 at 3:45 am
GE Additive has relaunched as Colibrium Additive. It was also announced that Concept Laser and Arcam EBM legacy brands will be retired.
- INDO-MIM taps 3D printing in precision manufacturingon April 25, 2024 at 6:27 pm
The precision metal parts manufacturer is using HP’s Metal Jet S100 printers to produce components using metal powder for the automotive, healthcare and other industries ...
- UltiMaker Targets Experienced Additive Manufacturers with New Factor 4on April 25, 2024 at 8:43 am
Industrial-grade 3D printer focuses on reliability, with automatic material handling and in-process monitoring.
- GE Additive rebrands as Colibrium Additive; Concept Laser & Arcam brands to be retiredon April 25, 2024 at 8:29 am
GE Additive has rebranded as Colibrium Additive, after GE split into three public companies earlier this month. Colibrium Additive will operate under the GE Aerospace umbrella.
- Xact Metal ‘breaks the mold’ to showcase metal Additive Manufacturing as viable tooling optionon April 25, 2024 at 4:35 am
Xact Metal has announced the launch of its new initiative, “Breaking the Mold: The Xact Solution to Better Tooling.” ...
- AMGTA research explores sustainability of metal additive manufacturing feedstockon April 25, 2024 at 3:11 am
The study was conducted with Syntec Associates and Divergent Technologies to determine specific energy requirements for producing metal 3D printing materials via three key processes.
- AMGTA Releases Research on Sustainability of Powder and Wire Additive Feedstockon April 24, 2024 at 5:22 am
Helium Gas Atomization is Best for Powder Atomization: Research indicates that, from an energy perspective, helium gas atomization stands out as the most sustainable gas atomization method, showing a ...
- Martinrea International Inc. Announces Investment in Equispheres Inc., a Supplier of High-Performance Powders for Additive Manufacturingon April 23, 2024 at 2:00 pm
TORONTO, April 23, 2024 (GLOBE NEWSWIRE) -- (TSX:MRE) a diversified and global automotive supplier engaged in the design, development and manufacturing of highly engineered, value-added Lightweight ...
- In-situ alloying of NiTiNb shape memory alloys by additive manufacturingon April 16, 2024 at 1:22 pm
In order to address the challenges in fabrication NiTiNb ternary alloy structures, researchers from Shandong University (SDU) have proposed an alloy design strategy to prepare NiTiNb shape memory ...
The Latest Google Headlines on:
Additive manufacturing
[google_news title=”” keyword=”Additive manufacturing” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
3D printing
- ‘Faster, better, cheaper’ homes: Venture seeks to bring 3D printing construction to Guamon April 26, 2024 at 2:53 pm
An affordable concrete home, with walls, plumbing and electrical fixtures built and installed in one day’s time?
- World's biggest 3D printer whirs into actionon April 26, 2024 at 7:09 am
A giant 3D printer, which is big enough to make a house, has been unveiled at the University of Maine. The university says it has beaten its own record for the world's largest polymer 3D printer - with the new printer four times bigger than the previous machine.
- UNF, Mayo Clinic partner on 3D anatomy printing courseon April 25, 2024 at 11:45 am
The course gives biology and engineering students hands-on experience in an emerging field that will help improve patient outcomes.
- Stellar Blade Fan Using 3D Printer to Create Eve Statueon April 24, 2024 at 3:54 pm
A Stellar Blade fan showcases their enthusiasm for the highly anticipated game by creating and sharing a model of Eve for 3D printing.
- Could Your Next Chair Be 3D Printed? Exploring the Viability of 3D Printing in Furniture Productionon April 24, 2024 at 8:55 am
Desktop 3D printers have undergone a revolution in the past year with the introduction of very high speed devices, in some cases able to print at speeds up to 10X of the earlier devices. This same speed-up tech can now be ported to larger format FFF 3D printers, and that should dramatically cut down on the cost to produce parts.
The Latest Google Headlines on:
3D printing
[google_news title=”” keyword=”3D printing” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]