In light sheet 3D printing, red and blue laser light is used to print objects precisely and quickly on a micrometer scale
(Photo: Vincent Hahn, KIT)
Researchers from the Cluster of Excellence “3D Matter Made to Order” Print Microstructures by Crossing Red and Blue Laser Beams
Printing objects from plastic precisely, quickly, and inexpensively is the goal of many 3D printing processes. However, speed and high resolution remain a technological challenge. A research team from the Karlsruhe Institute of Technology (KIT), Heidelberg University, and the Queensland University of Technology (QUT) has come a long way toward achieving this goal. It developed a laser printing process that can print micrometer-sized parts in the blink of an eye. The international team published the work in Nature Photonics. (DOI: 10.1038/s41566-022-01081-0)
Stereolithography 3D printing is currently one of the most popular additive manufacturing processes for plastics, both for private and industrial applications. In stereolithography, the layers of a 3D object are projected one by one into a container filled with resin. The resin is cured by UV light. However, previous stereolithography methods are slow and have too low a resolution. Light-sheet 3D printing, which is used by the KIT researchers, is a fast and high-resolution alternative.
3D Printing with Two Colors in Two Stages
In light-sheet 3D printing, blue light is projected into a container filled with a liquid resin. The blue light pre-activates the resin. In a second stage, a red laser beam provides the additional energy needed to cure the resin. However, 3D printing can only print quickly resins that quickly return from their pre-activated state to their original state. Only then can the next layer be printed. Consequently, the return time dictates the waiting time between two successive layers and thus the printing speed. “For the resin we used, the return time was less than 100 microseconds, which allows for high printing speeds,” says first author Vincent Hahn from KIT’s Institute of Applied Physics (APH).
Micrometer-sized Structures in Just the Blink of an Eye
To take advantage of this new resin, the researchers built a special 3D printer. In this printer, blue laser diodes are used to project images into the liquid resin using a high-resolution display with a high frame rate. The red laser is formed into a thin “light sheet” beam and crosses the blue beam vertically in the resin. With this arrangement, the team was able to 3D print micrometer-sized parts in a few hundred milliseconds, i.e. in the blink of an eye. However, it should not stop there: “With more sensitive resins, we could even use LEDs instead of lasers in our 3D printer,” says Professor Martin Wegener of APH. “Ultimately, we want to print 3D structures that are centimeters in size, while maintaining micrometer resolution and high printing speeds.”
Original Article: Joining Forces: Fast-as-lightning 3D Microprinting with Two Lasers
More from: Karlsruhe Institute of Technology | Queensland University of Technology | Heidelberg University
The Latest Updates from Bing News
Go deeper with Bing News on:
Light-sheet 3D printing
- Beauty Love Is in the Air at Luxe Pack & MakeUp in LA
The co-located event on February 14-15 played on a Valentine’s Day theme—& highlighted beauty, skincare and fragrance packaging & formulation innovations.
- 5 Mass. school districts receive funds for electric buses and more top stories
The University of Maine has beat its own world record by creating the largest polymer 3D printer. This new model can print up to 500 pounds each hour. Losses at Peacock narrowed to $639 million ...
- How to sell art online in 2024: The ultimate guide
Selling art online is similar to other online businesses but has unique challenges. Check out our guide to learn to sell art online.
- FORVIA HELLA Launches Innovative RokLUME 280N SMART Work Lamp for Enhanced Vehicle Safety and Efficiency
FORVIA HELLA introduces the RokLUME 280N SMART, a groundbreaking work lamp designed for vehicles in mining, construction, and forestry sectors. Con ...
- Wrap-Up of Federal and State Chemical Regulatory Developments, April 2024
Publish an advance notice of proposed rulemaking (ANPRM) concerning lead for wheel-balancing weights (lead wheel weights); and By December 31, 2024, either sign a proposed rule regulating lead wheel ...
Go deeper with Bing News on:
Faster 3D printing
- ‘Faster, better, cheaper’ homes: Venture seeks to bring 3D printing construction to Guam
An affordable concrete home, with walls, plumbing and electrical fixtures built and installed in one day’s time?
- World's largest 3D printer can print a house in under 80 hours
The University of Maine just revealed the world’s largest 3D printer, and it is an absolute beast. The printer, which the university named Factory of … The post World’s largest 3D printer can print a ...
- The world’s largest 3D printer is at a university in Maine. It just unveiled an even bigger one
The university that boasts the world’s largest 3D printer developed one even bigger. A printer unveiled Tuesday at the University of Maine is four times larger than the current one and is capable of ...
- The world’s largest 3D printer prints a house in 80 hours
The University of Maine has just unveiled the world's largest polymer 3D printer. The new device, called Factory of the Future 1.0 (FoF 1.0), can prin ...
- Why animals run faster than their robot doppelgängers… for now
“It [advances in robots] will move faster, because evolution is undirected,” University of Washington Department of Electrical & Computer Engineering Associate Professor Sam Burden said. “There are ...
1 Comments
Lesson plans
Good post , thank you for sharing with us. Amazing research information yoiu did shared with us!