In light sheet 3D printing, red and blue laser light is used to print objects precisely and quickly on a micrometer scale
(Photo: Vincent Hahn, KIT)
Researchers from the Cluster of Excellence “3D Matter Made to Order” Print Microstructures by Crossing Red and Blue Laser Beams
Printing objects from plastic precisely, quickly, and inexpensively is the goal of many 3D printing processes. However, speed and high resolution remain a technological challenge. A research team from the Karlsruhe Institute of Technology (KIT), Heidelberg University, and the Queensland University of Technology (QUT) has come a long way toward achieving this goal. It developed a laser printing process that can print micrometer-sized parts in the blink of an eye. The international team published the work in Nature Photonics. (DOI: 10.1038/s41566-022-01081-0)
Stereolithography 3D printing is currently one of the most popular additive manufacturing processes for plastics, both for private and industrial applications. In stereolithography, the layers of a 3D object are projected one by one into a container filled with resin. The resin is cured by UV light. However, previous stereolithography methods are slow and have too low a resolution. Light-sheet 3D printing, which is used by the KIT researchers, is a fast and high-resolution alternative.
3D Printing with Two Colors in Two Stages
In light-sheet 3D printing, blue light is projected into a container filled with a liquid resin. The blue light pre-activates the resin. In a second stage, a red laser beam provides the additional energy needed to cure the resin. However, 3D printing can only print quickly resins that quickly return from their pre-activated state to their original state. Only then can the next layer be printed. Consequently, the return time dictates the waiting time between two successive layers and thus the printing speed. “For the resin we used, the return time was less than 100 microseconds, which allows for high printing speeds,” says first author Vincent Hahn from KIT’s Institute of Applied Physics (APH).
Micrometer-sized Structures in Just the Blink of an Eye
To take advantage of this new resin, the researchers built a special 3D printer. In this printer, blue laser diodes are used to project images into the liquid resin using a high-resolution display with a high frame rate. The red laser is formed into a thin “light sheet” beam and crosses the blue beam vertically in the resin. With this arrangement, the team was able to 3D print micrometer-sized parts in a few hundred milliseconds, i.e. in the blink of an eye. However, it should not stop there: “With more sensitive resins, we could even use LEDs instead of lasers in our 3D printer,” says Professor Martin Wegener of APH. “Ultimately, we want to print 3D structures that are centimeters in size, while maintaining micrometer resolution and high printing speeds.”
Original Article: Joining Forces: Fast-as-lightning 3D Microprinting with Two Lasers
More from: Karlsruhe Institute of Technology | Queensland University of Technology | Heidelberg University
The Latest Updates from Bing News
Go deeper with Bing News on:
Light-sheet 3D printing
- Off-Road Excellence: A Case Study of Precision Machining and Craftsmanship
A luxury off-road truck design, machine and fabrication shop in Southern California blends traditional craftsmanship with modern technology to redefine truck-building ...
- Strategies for Mitigating Emissions in 3D Printing Operations
Both FFF and resin 3D printers generate emissions, although they do so differently. FFF systems heat up a filament, but that heat causes the emissions to occur. Typically the higher the heat, the more ...
- Researchers Develop Rod-Based 3D Printing Process for Radial Objects
A new research paper proposes an unusual 3D printing process that uses a rod instead of a flat print plate. Print plates are near-universal in 3D print technologies, mainly because objects are ...
- Study unveils 3D printing PQD-polymer architectures at room temperature
A technology enabling the fabrication of intricate three-dimensional (3D) quantum dot (QD)-based structures at room temperature has been developed.
- The Best 3D Printers for 2024
More affordable than ever, 3D printers are booming for personal, professional, and educational use. Here's everything to know before you buy one, along with the top models from our hands-on testing.
Go deeper with Bing News on:
Faster 3D printing
- TPI Composites partners with University of Maine and Oak Ridge National Laboratory for 3D printed wind turbine tooling
TPI Composites (TPI) has unveiled a collaborative initiative with the University of Maine Advanced Structures and Composites Center (ASCC) and Oak Ridge National Laboratory aimed at harnessing 3D ...
- Large-volume VFGF extrusion printer facilitates modular composite cockpit
A complete cockpit of a full flight simulator was produced in in a little more than a month, enabling fast build speeds, high surface quality and dimensional accuracy.
- See what it's like living in Portugal's first 3D printed, 2-bedroom concrete home
Portugal-based startup Havelar says it can build a new home in two months. The walls of its new two-bed home were printed in 18 hours.
- This gigantic 3D printer could reinvent manufacturing
A massive additive manufacturing device that can build houses, and a whole lot more has just been unveiled at the University of Maine.
- A 3D Printer On Every Desk? Why Companies Are Buying More 3D Printers
Entry-level desktop 3D printers saw record sales in 2023. It’s not the number of machines sold that’s surprising; it’s who’s buying them: businesses.