New approach developed at MIT could generate power from sunlight efficiently and on demand.
A new approach to harvesting solar energy, developed by MIT researchers, could improve efficiency by using sunlight to heat a high-temperature material whose infrared radiation would then be collected by a conventional photovoltaic cell. This technique could also make it easier to store the energy for later use, the researchers say.
In this case, adding the extra step improves performance, because it makes it possible to take advantage of wavelengths of light that ordinarily go to waste. The process is described in a paper published this week in the journal Nature Nanotechnology, written by graduate student Andrej Lenert, associate professor of mechanical engineering Evelyn Wang, physics professor Marin Solja?i?, principal research scientist Ivan Celanovi?, and three others.
A conventional silicon-based solar cell “doesn’t take advantage of all the photons,” Wang explains. That’s because converting the energy of a photon into electricity requires that the photon’s energy level match that of a characteristic of the photovoltaic (PV) material called a bandgap. Silicon’s bandgap responds to many wavelengths of light, but misses many others.
To address that limitation, the team inserted a two-layer absorber-emitter device — made of novel materials including carbon nanotubes and photonic crystals — between the sunlight and the PV cell. This intermediate material collects energy from a broad spectrum of sunlight, heating up in the process. When it heats up, as with a piece of iron that glows red hot, it emits light of a particular wavelength, which in this case is tuned to match the bandgap of the PV cell mounted nearby.
This basic concept has been explored for several years, since in theory such solar thermophotovoltaic (STPV) systems could provide a way to circumvent a theoretical limit on the energy-conversion efficiency of semiconductor-based photovoltaic devices. That limit, called the Shockley-Queisser limit, imposes a cap of 33.7 percent on such efficiency, but Wang says that with TPV systems, “the efficiency would be significantly higher — it could ideally be over 80 percent.”
There have been many practical obstacles to realizing that potential; previous experiments have been unable to produce a STPV device with efficiency of greater than 1 percent. But Lenert, Wang, and their team have already produced an initial test device with a measured efficiency of 3.2 percent, and they say with further work they expect to be able to reach 20 percent efficiency — enough, they say, for a commercially viable product.
The design of the two-layer absorber-emitter material is key to this improvement. Its outer layer, facing the sunlight, is an array of multiwalled carbon nanotubes, which very efficiently absorbs the light’s energy and turns it to heat. This layer is bonded tightly to a layer of a photonic crystal, which is precisely engineered so that when it is heated by the attached layer of nanotubes, it “glows” with light whose peak intensity is mostly above the bandgap of the adjacent PV, ensuring that most of the energy collected by the absorber is then turned into electricity.
In their experiments, the researchers used simulated sunlight, and found that its peak efficiency came when its intensity was equivalent to a focusing system that concentrates sunlight by a factor of 750. This light heated the absorber-emitter to a temperature of 962 degrees Celsius.
This level of concentration is already much lower than in previous attempts at STPV systems, which concentrated sunlight by a factor of several thousand. But the MIT researchers say that after further optimization, it should be possible to get the same kind of enhancement at even lower sunlight concentrations, making the systems easier to operate.
Such a system, the team says, combines the advantages of solar photovoltaic systems, which turn sunlight directly into electricity, and solar thermal systems, which can have an advantage for delayed use because heat can be more easily stored than electricity. The new solar thermophotovoltaic systems, they say, could provide efficiency because of their broadband absorption of sunlight; scalability and compactness, because they are based on existing chip-manufacturing technology; and ease of energy storage, because of their reliance on heat.
The Latest on: Solar thermophotovoltaic
[google_news title=”” keyword=”Solar thermophotovoltaic” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Solar thermophotovoltaic
- Most Efficient Solar Panels for 2024: New Record-Setting Panel Tops the Liston May 4, 2024 at 3:43 pm
The most efficient residential solar panel is the Maxeon 7, which unseated older Maxeon and Canadian Solar panels. Maxeon has led the industry in solar panel efficiency for some time and its ...
- Best Solar Companies of 2024on May 4, 2024 at 2:15 am
Sunlux, Project Solar and Freedom Solar Power are our top picks. If you’re ready to go solar but aren’t sure where to start, you’re not alone. ConsumerAffairs is here to help you evaluate ...
- Tesla Solar Reviews, Services and Costs (2024)on May 1, 2024 at 5:00 pm
Aniket Bhor is a solar engineer who has spent nearly a decade studying and working in the solar power sector in the European, Asian and North American markets. He is a climate enthusiast and avid ...
- Best Solar Panels For Homes Of 2024on April 30, 2024 at 4:10 am
Commissions do not affect our editors' opinions or evaluations. Solar panels and their accessories unlock the boundless energy from sunshine and transform it into useful energy at home.
- The Best Solar Generators for at Home or On the Go, Testedon April 29, 2024 at 6:30 am
Also called solar “power stations,” solar generators feature high-capacity batteries that store energy that can be used to power appliances and digital devices. Unlike traditional generators ...
- How Much Do Solar Panels Cost In 2024?on April 15, 2024 at 11:19 pm
As you’re budgeting for a solar panel system, you may come across three types of solar panels. Each one can come with its own price tag, so consider the following price differences before you ...
- When is the next total solar eclipse? It depends on how far you’re willing to travelon April 9, 2024 at 10:33 am
Monday’s total solar eclipse, one of the most highly anticipated events of 2024, has come and gone. Millions of people were in the path of totality, where the moon completely blocks the face of ...
- The solar eclipse will be partially visible in Massachusetts. Here's what time and where to watch.on April 8, 2024 at 1:56 pm
BOSTON - Massachusetts may not be in the path of totality, but the April 8, 2024 solar eclipse will be visible in the Boston area if the cloud forecast cooperates. WBZ meteorologist and executive ...
- The best places to see today's solar eclipse in NYC and across New York stateon April 8, 2024 at 1:55 pm
NEW YORK -- The 2024 total solar eclipse darkened the sky across the United States Monday, with Upstate New York right in the path of totality and NYC and New Jersey seeing a partial solar eclipse.
- Solar eclipse 2024 in Baltimore region | PHOTOSon April 8, 2024 at 10:58 am
April 08, 2024: Malaika Bradley Jones, 14, of Baltimore, views the 2024 solar eclipse through safety solar glasses inside the observatory at the Maryland Science Center. (Kenneth K. Lam/Staff ...
via Bing News