By chemically modifying and pulverizing a promising group of compounds, scientists at the National Institute of Standards and Technology (NIST) have potentially brought safer, solid-state rechargeable batteries two steps closer to reality.
These compounds are stable solid materials that would not pose the risks of leaking or catching fire typical of traditional liquid battery ingredients and are made from commonly available substances.
Since discovering their properties in 2014, a team led by NIST scientists has sought to enhance the compounds’ performance further in two key ways: Increasing their current-carrying capacity and ensuring that they can operate in a sufficiently wide temperature range to be useful in real-world environments.
Considerable advances have now been made on both fronts, according to Terrence Udovic of the NIST Center for Neutron Research, whose team has published a pair of scientific papers that detail each improvement.
The first advance came when the team found that the original compounds — made primarily of hydrogen, boron and either lithium or sodium — were even better at carrying current with a slight change to their chemical makeup. Replacing one of the boron atoms with carbon improved their ability to conduct charged particles, or ions, which are what carry electricity inside a battery. As the team reported in February in their first paper, the switch made the compounds about 10 times better at conducting.
But perhaps more important was clearing the temperature hurdle. The compounds conducted ions well enough to operate in a battery — as long as it was in an environment typically hotter than boiling water. Unfortunately, there’s not much of a market for such high-temperature batteries, and by the time they cooled to room temperature, the materials’ favorable chemical structure often changed to a less conductive form, decreasing their performance substantially.
One solution turned out to be crushing the compounds’ particles into a fine powder. The team had been exploring particles that are measured in micrometers, but as nanotechnology research has demonstrated time and again, the properties of a material can change dramatically at the nanoscale. The team found that pulverizing the compounds into nanometer-scale particles resulted in materials that could still perform well at room temperature and far below.
“This approach can remove worries about whether batteries incorporating these types of materials will perform as expected even on the coldest winter day,” said Udovic, whose collaborators on the most recent paper include scientists from Japan’s Tohoku University, the University of Maryland and Sandia National Laboratories. “We are currently exploring their use in next-generation batteries, and in the process we hope to convince people of their great potential.”
Learn more: For Rechargeable Batteries That Crush the Competition, Crush This Material
The Latest on: Solid-state rechargeable batteries
[google_news title=”” keyword=”solid-state rechargeable batteries” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Solid-state rechargeable batteries
- Breakthrough in Sodium Battery Chemistry Promises Lower Costson April 27, 2024 at 12:00 pm
A new mass synthesis process for sodium-containing sulfides could make all-solid-state sodium batteries more affordable and safer than lithium-ion batteries.
- Best Xbox Accessories for 2024on April 26, 2024 at 11:04 am
Level up your gaming experience with a collection of Xbox accessories we've curated. From wireless headsets to sim racing wheels, we've got you covered.
- Binghamton University, Natrion, awarded $65,000 grant for lithium battery developmenton April 23, 2024 at 4:46 pm
This collaboration was one of seven to be awarded throughout the state for teamwork between a non-profit and an industry ...
- Engineering EV batteries for the 2030son April 22, 2024 at 9:02 pm
With SSBs being touted as a game-changer for EV battery technology, American SSB tech company QuantumScape has adopted a novel approach to battery design by doing away with the anode. Instead of an ...
- Ensurge Delivers First Shipment of Solid-State Lithium Microbatteries to Leading Consumer Electronics Companyon April 21, 2024 at 10:01 pm
(OSE: ENSU, and OTCQB: ENMPY) (“Ensurge” or the “Company”), today announced it has completed its first shipment of the world’s first fully functional multi-layer solid-state lithium microbatteries.
- Researchers Develop Revolutionary Cathode Material for Lithium-Sulfur Batterieson April 19, 2024 at 1:00 pm
Researchers at the University of California - San Diego have developed a self-healing cathode material that overcomes the challenges of traditional sulfur cathodes and could revolutionize solid-state ...
- Beyond Lithium: What Will the Next Generation of Batteries Be Made Of?on April 18, 2024 at 1:59 pm
The clean energy revolution requires a lot of batteries. While lithium-ion dominates today, researchers are on a quest for better materials.
- How eco-friendly is your fave instrument?on April 17, 2024 at 3:15 am
An electric piano is a much greener alternative; it can easily fit in a car and be updated with new sounds. However, most electric pianos are made of plastic and rubber, though some have wooden ...
- Here's Why Solid State Batteries Might Not Be The Next Best Thingon April 15, 2024 at 4:30 pm
Solid-state batteries are the holy grail of the EV industry. But now, some of its main advocates are expressing doubts about it.
- Battery breakthrough could eliminate range anxiety for electric vehicleson April 11, 2024 at 10:47 pm
Scientists have discovered a new process that could supercharge the transition to next-generation rechargeable ... lithium-ion batteries – which are found in everything from smartphones to electric ...
via Bing News