Scientists from RIKEN and the University of Tokyo have developed a new type of ultra-thin photovoltaic device, coated on both sides with stretchable and waterproof films, which can continue to provide electricity from sunlight even after being soaked in water or being stretched and compressed. The work, published in Nature Energy, could open the way to wearable solar cells, which will provide power to devices such as health monitors incorporated into clothing.
One of the requirements of the Internet of Things—referring to a world where devices of all sorts are connected to the Internet—is the development of power sources for a host of devices, including devices that can be worn on the body. According to Takao Someya, the leader of the research group, these could include sensors that record heartbeats and body temperature, for example, providing early warning of medical problems. In the past, attempts have been made to create photovoltaics that could be incorporated into textiles, but typically they lacked at least one of the important properties—long-term stability in both air and water, energy efficiency, and robustness including resistance to deformation—that are key to successful devices.
For the present work, the members of the research group developed extremely thin and flexible organic photovoltaic cells, based on a material called PNTz4T, which they had developed in earlier work. They deposited the device in an inverse architecture, which they had previously developed, onto a 1-um-thick parylene film. The ultra-thin device was then placed onto acrylic-based elastomer and the top side of the device was coated with an identical elastomer, giving it a coating on both sides to prevent water infiltration.. The elastomer, while allowing light to enter, prevented water and air from leaking into the cells, making them more long-lasting than previous experiments.
The researchers then subjected the device to a variety of tests, finding first that it had a strong energy efficiency of 7.9 percent, producing a current of 7.86 milliwatts per square centimeter, as the current density was 13.8 milliamperes per square centimeter at 0.57 volts, based on a simulated sunlight of 100 milliwatts per square centimeter. To test its resistance to water, they soaked it in water for two hours, and found that the efficiency decreased by just 5.4 percent. And to test the durability, they subjected it to compression, and found that after compressing by nearly half for twenty cycles while placing drops of water on it, it still had 80 percent of the original efficiency.
According to Kenjiro Fukuda of the RIKEN Center for Emergent Matter Science, “We were very gratified to find that our device has great environmental stability while simultaneously having a good efficiency and mechanical robustness. We very much hope that these washable, lightweight and stretchable organic photovoltaics will open a new avenue for use as a long-term power source system for wearable sensors and other devices.”
Learn more: A solar cell you can put in the wash
The Latest on: Wearable solar cell
[google_news title=”” keyword=”wearable solar cell” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]- MIT Technology Reviewon April 27, 2024 at 7:46 pm
This is what the priorities in the $95 billion spending package tell us about four military technologies and the way they’re reshaping how war is fought. Researchers are using generative AI and other ...
- What’s that?…A fuel cell that harvests energy from…dirt?on April 26, 2024 at 7:10 am
A soil microbial fuel cell where microbes in dirt could power applications which are literally “in the field”.
- Breakthrough in Organic Solar Cells Paves Way for Wearable Solar Poweron April 25, 2024 at 5:00 pm
An international group of scientists from the University of Hong Kong (HKU) has developed a new method to improve the efficiency and stability of organic solar cells, paving the way for integrating ...
- First silicon solar cell celebrates 70th birthdayon April 25, 2024 at 6:25 am
US researchers presented the first prototype of a usable solar module. The efficiency at that time was around 6%. A lot has happened since then.
- Ultra-thin, flexible solar cells demonstrate their promise in a commercial quadcopter droneon April 24, 2024 at 9:27 am
Ultra-thin and flexible solar cells made from a new material called "perovskite" are proving to be an efficient and lightweight solution to facilitate self-sufficient energy generation over extended ...
- NREL updates interactive chart of solar cell efficiencyon April 24, 2024 at 8:44 am
The US National Renewable Energy Laboratory (NREL) has updated its research cell efficiency chart for a range of PV technologies.
- Scientists stencil-paint carbon nanotube components for flexible transparent electronicson April 23, 2024 at 9:23 am
Researchers from Skoltech, MIPT, and elsewhere have found a fast and inexpensive way to create geometric patterns in carbon nanotube films. The resulting films turned out to have superior properties ...
- Here are the 30+ startups showcasing at HAX's May 1 Demo Dayon April 22, 2024 at 2:39 pm
A few weeks back, TechCrunch ventured out to New Jersey to pay an early visit to HAX’s Newark offices. HAX’s China operations have shrunk considerably since then, courtesy of a global pandemic and all ...
- Polymer Solar Cells Market: Poised for a 21.5% Surge by 2027 – Powering a Sustainable Futureon April 21, 2024 at 11:39 pm
The global polymer solar cell market is poised for explosive growth, projected to reach a staggering US$ 290 million by 2027 with a CAGR of 21.5%. This presents a groundbreaking opportunity for ...
- Solar-cell-packin' drone uses sunlight for on-the-spot rechargingon April 19, 2024 at 12:19 pm
Multirotor drones may one day be able recharge their batteries while out and about, instead of having to return to a charging station. They could do so via onboard ultra-thin solar cells, which have ...
via Google News and Bing News