With a new process developed at TU Wien (Vienna), living cells can be integrated into fine structures created in a 3D printer – extremely fast and with very high resolution.
Tissue growth and the behavior of cells can be controlled and investigated particularly well by embedding the cells in a delicate 3D framework. This is achieved using additive 3D printing methods – so called “bioprinting” techniques. However, this involves a number of challenges: Some methods are very imprecise or only allow a very short time window in which the cells can be processed without being damaged. In addition, the materials used must be cell-friendly during and after the 3D biopriting process. This restricts the variety of possible materials.
A high-resolution bioprinting process with completely new materials has now been developed at TU Wien (Vienna): Thanks to a special “bio ink” for the 3D printer, cells can now be embedded in a 3D matrix printed with micrometer precision – at a printing speed of one meter per second, orders of magnitude faster than previously possible.
The environment matters
“The behavior of a cell behaves depends crucially on the mechanical, chemical and geometric properties of its environment,” says Prof. Aleksandr Ovsianikov, head of the 3D Printing and Biofabrication research group at the Institute of Materials Science and Technology (TU Wien). “The structures in which the cells are embedded must be permeable to nutrients so that the cells can survive and multiply. But it is also important whether the structures are stiff or flexible, whether they are stable or degrade over time”.
It is possible to first produce suitable structures and then colonise them with living cells – but this approach can make it difficult to place the cells deep inside the scaffold, and it is hardly possible to achieve a homogeneous cell distribution that way. The much better option is to embed the living cells directly into the 3D structure during the production of the structure – this technique is known as “bioprinting”.
Printing microscopically fine 3D objects is no longer a problem today. However, the use of living cells presents science with completely new challenges: “Until now, there has simply been a lack of suitable chemical substances,” says Aleksandr Ovsianikov. “You need liquids or gels that solidify precisely where you illuminate them with a focused laser beam. However, these materials must not be harmful to the cells, and the whole process has to happen extremely quickly.”
Two photons at once
In order to achieve an extremely high resolution, two-photon polymerization methods have been used at TU Wien for years. This method uses a chemical reaction that is only initiated when a molecule of the material simultaneously absorbs two photons of the laser beam. This is only possible where the laser beam has a particularly high intensity. At these points the substance hardens, while it remains liquid everywhere else. Therefore, this two-photon method is best suited to produce extremely fine structures with high precision.
However, these high resolution techniques usually have the disadvantage of being very slow – often in the range of micrometers or a few millimeters per second. At TU Wien, however, cell-friendly materials can be processed at a speed of more than one meter per second – a decisive step forward. Only if the entire process can be completed within a few hours is there a good chance of the cells surviving and developing further.
Numerous new options
“Our method provides many possibilities to adapt the environment of the cells,” says Aleksandr Ovsianikov. Depending on how the structure is built, it can be made stiffer or softer. Even fine, continuous gradients are possible. In this way, it is possible to define exactly how the structure should look in order to allow the desired kind of cell growth and cell migration. The laser intensity can also be used to determine how easily the structure will be degraded over time.
Ovsianikov is convinced that this is an important step forward for cell research: “Using these 3D scaffolds, it is possible to investigate the behavior of cells with previously unattainable accuracy. It is possible to study the spread of diseases, and if stem cells are used, it is even possible to produce tailor-made tissue in this way”.
The research project is an international and interdisciplinary cooperation in which three different institutes of the TU Vienna were involved: Ovsianikov’s research group was responsible for the printing technology itself, the Institute of Applied Synthesic Chemistry developed fast and cell friendly photoinitiators (the substances that initiate the hardening process when illuminated) and the Institute of Lightweight Structures and Structural Biomechanics analyzed the mechanical properties of the printed structures.
Learn more: Bioprinting: Living cells in a 3D printer
The Latest on: Bioprinting
[google_news title=”” keyword=”bioprinting” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Bioprinting
- A Guide to 3D Printing for Healthcare, Today and Tomorrowon May 9, 2024 at 10:02 am
The technology is used by many health systems to create custom implants and models, but how will it be used in medicine as it advances?
- New technique bioprints live cells inside the body using ultrasonic waveson May 8, 2024 at 10:36 pm
Revolutionary acousto-printing method can be used to circumvent invasive surgery, and has a wide array of potential applications.
- 3D Bioprinting Market Expected to Hit USD 6.9 Billion by 2032 | Market.Uson April 11, 2024 at 11:10 pm
According to a recent report by Market.us, the Global 3D Bioprinting Market size is expected to be worth around USD 6.9 Billion by 2032 from USD 1.9 Billion in 2023, growing at a CAGR of 16.1% during ...
- 3D printing and bioprinting in healthcare - statistics and factson April 10, 2024 at 5:00 pm
Bioprinting is a much newer technology compared to 3D printing and uses bioinks and other biomaterials to create organ-like structures. Some have referred to bioprinting as ‘healthcare’s next ...
- Advancing gastric cancer treatment through personalized 3D bioprintingon March 21, 2024 at 10:37 am
By using 3D bioprinting to accurately replicate the biological environment surrounding gastric cancer cells, the researchers have achieved a significant feat—predicting a patient's response to ...
- Bioprinting News and Researchon March 17, 2024 at 5:00 pm
FluidForm Bio, a leader in developing life-like human tissue to treat disease, shares recent advancements in building human cardiac tissues using FRESH™ 3D bioprinting. FluidForm Bio ...
- TissueFab® bioink Conductive for 3D bioprintingon November 22, 2023 at 11:00 pm
TissueFab ® bioink Conductive Vis/405 nm, low endotoxin, is a bioink tailored for 3D bioprinting with electrical conductivity. This specialized bioink is designed to create optimal conditions for ...
- Revolutionising osteoarthritis treatment through bioprintingon September 25, 2023 at 7:40 am
In collaboration with clinicians and cell biologists and using the unique capability of The University of Manchester’s Bioprinting Platform, Dr Marco Domingos is developing new technology-driven ...
- 26 Million New Cases, Three Dimensions, And One New Technology: How Bioprinting Can Improve Cancer Treatmentson July 11, 2023 at 3:30 pm
printed from a model (such as the gold bracelet model seen on the laptop screen). Bioprinting, also known as 3D bioprinting, uses cells, growth factors (naturally occurring substances that help ...
- Will 'Bioprinting' Body Parts Lead To Crazy Cosmetic Requests?on July 19, 2022 at 5:00 pm
Please confirm that you would like to log out of Medscape. If you log out, you will be required to enter your username and password the next time you visit. Log out ...
via Bing News