3D printing is revolutionizing the production of lightweight structures, soft robots and flexible electronics, but the technology struggles with complex, multimaterial integration.
To print a flexible device, including the electronics, a 3D printer must be able to seamlessly transition from a flexible material that moves with your joints for wearable applications, to a rigid material that accommodates the electronic components. It would also need to be able to embed electrical circuitry using multiple inks of varying conductivity and resistivity, precisely switching between them. And, it would be ideal to do all of this without the stopping the printing process.
The ability to integrate disparate materials and properties within printed objects is the next frontier in 3D printing.
Towards this objective, Harvard researchers have designed new multimaterial printheads that mix and print concentrated viscoelastic inks that allow for the simultaneous control of composition and geometry during printing. Using active mixing and fast-switching nozzles, these novel printheads change material composition on the fly and could pave the way for entirely 3D-printed wearable devices, soft robots, and electronics.
The research was led by Jennifer A. Lewis, the Hansjörg Wyss Professor of Biologically Inspired Engineering at the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) and a Core Faculty Member at the Wyss Institute for Biologically Inspired Engineering at Harvard. The work was published in The Proceedings of the National Academy of Sciences (PNAS).
Mixing complex fluids is fundamental for printing a broad range of materials. But most mixing approaches are passive, wherein two streams of fluids converge into a single channel where they undergo diffusive mixing. This method works well with low-viscosity fluids, but is ineffective with high-viscosity fluids, like gels, especially in small volumes over short timescales.
To address this challenge, a new multimaterial printhead based on active mixing was designed by Lewis, along with Thomas Ober, postdoctoral research scholar at the Wyss Institute; and Daniele Foresti, the Society in Science Branco Weiss postdoctoral fellow. The active mixer efficiently mixes a wide range of complex fluids by using a rotating impeller inside a microscale nozzle.
“Passive mixtures don’t guarantee perfectly mixed materials, especially highly viscous inks,” said Ober, the paper’s first author. “We developed a rational framework — and verified it experimentally — for designing active microfluidic mixers that can mix a wide variety of materials.”
The team used this knowledge to create active mixing printheads for patterning heterogeneous materials in three dimensions.
The research team demonstrated several uses of their active mixing technology. They showed that silicone elastomers can be seamlessly printed into gradient architectures composed of soft and rigid regions. These structures may find potential application in flexible electronics, wearable devices, and soft robotics. They also printed reactive materials, such as two-part epoxies, which typically harden quickly when the two parts are combined. Finally, they showed that conductive and resistive inks could be mixed on demand to embed electrical circuitry inside 3D printed objects.
“The recent work by the Lewis Group is a significant advancement to the field of additive manufacturing,” said Christopher Spadaccini, Director of the Center for Engineered Materials, Manufacturing and Optimization at Lawrence Livermore National Lab. “By allowing for the mixing of two highly viscous materials on the fly, the promise of mixed material systems with disparate mechanical and functional properties becomes much more realistic. Before, this was really only a concept. This work will be foundational for applications which required integrated electrical and structural materials.”
Lewis’ lab also recently designed another printhead that can rapidly switch between multiple inks within a single nozzle, eliminating the structural defects that often occur during the start-and-stop process of switching materials.
“This printhead design eliminates the need to align multiple nozzles as well as start and stop ink flow on demand,” said James Hardin, first author of a recently published paper in Advanced Materials. This paper was co-authored by Ober, research fellow Alexander Valentine, and Lewis.
“Together, these active mixing and switching printheads provide an important advance for multimaterial 3D printing,” said Lewis. “They allow one to programmably control both materials composition and structure at the microscale, opening new avenues for creating materials by design.”
Read more: Printing lightweight, flexible, and functional materials
The Latest on: Multimaterial 3D printing
[google_news title=”” keyword=”multimaterial 3D printing” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Multimaterial 3D printing
- Tech grant makes 3D printing more accessible and ecologicalon May 1, 2024 at 6:25 am
What could be more fun and engaging than learning some of the principles of the scientific method and physics by making and launching your own rocket?
- Researchers develop new 3D printing for ultra-thin multi-material tubular structureson April 30, 2024 at 9:43 am
A novel 3D printing technology developed by Beihang University researchers was able to print multi-material tubular structures with a minimum wall thickness as thin as 50 micrometers and a minimum ...
- Prusa Research Provides Details on the Much Improved MMU3on April 30, 2024 at 9:11 am
Prusa Research has published some interesting test results for their new MMU3 material switching accessory. The “MMU” or Multi Material Unit, is an accessory that attaches to most of the company’s FFF ...
- The world’s biggest 3D printer can a make a house in under 80 hourson April 25, 2024 at 8:52 am
The University of Maine just unveiled the world’s largest polymer 3D printer. The new printer, named Factory of the Future 1.0 (FoF 1.0), can print objects as large as 96 feet long by 32 feet wide by ...
- Plasmics Combines Individual Requirements and High Quality Standards With Innovative FDM Printingon April 23, 2024 at 3:02 pm
We sat down with the CEO of Plasmics to learn more about their innovative hotends, orthepedic 3D printing application and more!
- Stratasys Launches Direct-to-Garment Fabric 3D Printing Systemon April 19, 2024 at 8:43 am
Kerry Stevenson, aka "General Fabb" has written over 8,000 stories on 3D printing at Fabbaloo since he launched the venture in 2007, with an intention to promote and grow the incredible technology of ...
- Stratasys launches Direct to Garment solution for J850 TechStyle 3D printeron April 18, 2024 at 5:56 am
Stratasys' D2G solution has been designed for customisation and personalisation by enabling the application of full colour multi-material 3D printing directly on fully assembled garments of various ...
- Stratasys (SSYS) Unveils Direct-to-Garment 3D Printing Solutionon April 18, 2024 at 2:37 am
Stratasys SSYS has launched its Direct-to-Garment (D2G) solution for the J850 TechStyle 3D printer in a groundbreaking move that combines personalized fashion with sustainability. This innovative ...
- Unlocking efficiency and profitability in dental labson April 17, 2024 at 9:39 pm
Anthony Gillitt discusses the power of multi-material technology in creating efficiency and profitability in dental labs.
- Urban Tattoos at Texprocesson April 17, 2024 at 5:00 pm
The Urban Tattoo collection showcases the potential and the ease of direct-to-garment 3D printing. With contributions from noted designers Karim Rashid, Travis Fitch and Zlatko Yanakiev at Meshroom, ...
via Bing News