Researchers have used a graphite coating that makes perovskite solar cells waterproof.
A cheaper, cleaner and more sustainable way of making hydrogen fuel from water using sunlight is a step closer thanks to new research from the University of Bath’s Centre for Sustainable Chemical Technologies.
With the pressure on global leaders to reduce carbon emissions significantly to solve a climate change emergency, there is an urgent need to develop cleaner energy alternatives to burning fossil fuels. Hydrogen is a zero carbon emission fuel alternative that can be used to power cars, producing only water as a waste product.
It can be made by splitting water into hydrogen and oxygen, however the process requires large amounts of electricity. Most electricity is made by burning methane so researchers at the University of Bath are developing new solar cells that use light energy directly to split water.
Most solar cells currently on the market are made of silicon, however they are expensive to make and require a lot of very pure silicon to manufacture. They are also quite thick and heavy, which limits their applications.
Perovskite solar cells, using materials with the same 3D structure as calcium titanium oxide, are cheaper to make, thinner and can be easily printed onto surfaces. They also work in low light conditions and can produce a higher voltage than silicon cells, meaning they could be used indoors to power devices without the need to plug into the mains.
The downside is they are unstable in water which presents a huge obstacle in their development and also limits their use for the direct generation of clean hydrogen fuels.
The team of scientists and chemical engineers, from the University of Bath’s Centre for Sustainable Chemical Technologies, has solved this problem by using a waterproof coating from graphite, the material used in pencil leads.
They tested the waterproofing by submerging the coated perovskite cells in water and using the harvested solar energy to split water into hydrogen and oxygen. The coated cells worked underwater for 30 hours – ten hours longer than the previous record.
After this period, the glue sandwiching the coat to the cells failed; the scientists anticipate that using a stronger glue could stabilise the cells for even longer.
Previously, alloys containing indium were used to protect the solar cells for water splitting, however indium is a rare metal and is therefore expensive and the mining process to obtain it is not sustainable.
The Bath team instead used commercially available graphite, which is very cheap and much more sustainable than indium.
Dr Petra Cameron, Senior Lecturer in Chemistry, said: “Perovskite solar cell technology could make solar energy much more affordable for people and allow solar cells to be printed onto roof tiles. However at the moment they are really unstable in water – solar cells are not much use if they dissolve in the rain!’
“We’ve developed a coating that could effectively waterproof the cells for a range of applications. The most exciting thing about this is that we used commercially available graphite, which is much cheaper and more sustainable than the materials previously tried.”
Perovskite solar cells produce a higher voltage than silicon based cells, but still not enough needed to split water using solar cells alone. To solve this challenge, the team is adding catalysts to reduce the energy requirement needed to drive the reaction.
Isabella Poli, Marie Curie FIRE Fellow and PhD student from the Centre for Sustainable Chemical Technologies, said: “Currently hydrogen fuel is made by burning methane, which is neither clean nor sustainable.
“But we hope that in the future we can create clean hydrogen and oxygen fuels from solar energy using perovskite cells.”
Learn more: Solar-powered hydrogen fuels a step closer
The Latest on: Perovskite solar cells
[google_news title=”” keyword=”perovskite solar cells” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Perovskite solar cells
- NREL outlines way forward for tandem cellson May 1, 2024 at 7:15 am
The vast majority of solar modules in use today rely on a single junction, which is able to absorb only a fraction of the solar spectrum and thus are limited to how efficient they can be. Tandem solar ...
- Is perovskite PV still the future of solar?on May 1, 2024 at 3:01 am
So, is perovskite PV still the future of solar? It seems likely to have place among the solutions, at the very least. Applications will get more energy efficient. The need to efficient solar is ...
- Tin halide perovskite solar cell based on new precursor additive achieves 12.22% efficiencyon April 30, 2024 at 5:00 pm
A group of researchers led by the Chungbuk National University in South Korea has designed a tin halide perovskite (Sn-HP) solar cell that utilizes an additive known as 4-Phenylthiosemicarbazide ...
- A strategy to boost the efficiency of perovskite/organic photovoltaic cellson April 29, 2024 at 5:32 am
While perovskite/organic tandem solar cells could theoretically achieve high PCEs and stabilities, their performance is hindered by a process known as phase segregation. This process degrades the ...
- Researchers crack code for more efficient perovskite solar cellson April 28, 2024 at 11:09 am
Perovskite solar cells utilize perovskite materials, known for their light-harvesting properties. Organic solar cells, on the other hand, are lightweight and flexible. Perovskite/organic tandem cells ...
- A strategy to boost the efficiency of perovskite/organic solar cellson April 28, 2024 at 6:00 am
Organic solar cells based on perovskite materials have been found to exhibit various advantages over conventional solar cell designs based on conventional silicon, including lower costs of fabrication ...
- Ultra-thin, flexible solar cells demonstrate their promise in a commercial quadcopter droneon April 24, 2024 at 9:27 am
Whether on Earth or in space, autonomous energy is critical in order to keep power systems running independently for extended periods of time, particularly in remote or unpredictable environments.
- Perovskite cells power palm-sized droneon April 24, 2024 at 4:19 am
Researchers at the Johannes Kepler University in Linz and the Linz Institute for Organic Solar Cells in Austria have developed ultra-lightweight quasi-2D perovskite solar cells with a power output of ...
- Solar-cell-packin' drone uses sunlight for on-the-spot rechargingon April 19, 2024 at 12:19 pm
Multirotor drones may one day be able recharge their batteries while out and about, instead of having to return to a charging station. They could do so via onboard ultra-thin solar cells, which have ...
- Pros and cons of solar energyon April 18, 2024 at 7:13 am
Solar power could become the primary source of electricity worldwide by 2050 – but there are still clouds in the forecast ...
via Bing News