A 3D printed ‘metamaterial’ boasting levels of strength for weight not normally seen in nature or manufacturing could change how we make everything from medical implants to aircraft or rocket parts.
RMIT University researchers created the new metamaterial – a term used to describe an artificial material with unique properties not observed in nature – from common titanium alloy.
But it’s the material’s unique lattice structure design, recently revealed in the Advanced Materials journal, that makes it anything but common: tests show it’s 50% stronger than the next strongest alloy of similar density used in aerospace applications.
Improving nature’s own design
Lattice structures made from hollow struts were originally inspired by nature: strong hollow-stemmed plants like the Victoria water lily or the hardy organ pipe coral (Tubipora musica) showed us the way in combining lightness and strength.
However, as RMIT’s Distinguished Professor Ma Qian explains, decades of trying to replicate these hollow ‘cellular structures’ in metals has been frustrated by the common issues of manufacturability and load stress concentrating on the inside areas of the hollow struts, leading to premature failures.
“Ideally, the stress in all complex cellular materials should be evenly spread,” Qian explained.
“However, for most topologies, it is common for less than half of the material to mainly bear the compressive load, while the larger volume of material is structurally insignificant.”
Metal 3D printing provides unprecedented innovative solutions to these issues.
By pushing 3D printing design to its limits, the RMIT team optimized a new type of lattice structure to distribute the stress more evenly, enhancing its strength or structural efficiency.
“We designed a hollow tubular lattice structure that has a thin band running inside it. These two elements together show strength and lightness never before seen together in nature,” said Qian.
“By effectively merging two complementary lattice structures to evenly distribute stress, we avoid the weak points where stress normally concentrates.”
Laser-powered strength
They 3D printed this design at RMIT’s Advanced Manufacturing Precinct using a process called laser powder bed fusion, where layers of metal powder are melted into place using a high-powered laser beam.
Testing showed the printed design – a titanium lattice cube – was 50% stronger than cast magnesium alloy WE54, the strongest alloy of similar density used in aerospace applications. The new structure had effectively halved the amount of stress concentrated on the lattice’s infamous weak points.
The double lattice design also means any cracks are deflected along the structure, further enhancing the toughness.
Study lead author and RMIT PhD candidate Jordan Noronha said they could make this structure at the scale of several millimetres or several metres in size using different types of printers.
This printability, along with the strength, biocompatibility, corrosion and heat resistance make it a promising candidate for many applications from medical devices such as bone implants to aircraft or rocket parts.
“Compared with the strongest available cast magnesium alloy currently used in commercial applications requiring high strength and light weight, our titanium metamaterial with a comparable density was shown to be much stronger or less susceptible to permanent shape change under compressive loading, not to mention more feasible to manufacture,” Noronha said.
The team plans to further refine the material for maximum efficiency and explore applications in higher-temperature environments.
While currently resistant to temperatures as high as 350 °C, they believe it could be made to withstand temperatures up to 600 °C using more heat-resistant titanium alloys, for applications in aerospace or firefighting drones.
As the technology to make this new material is not yet widely available, its adoption by industry might take some time.
“Traditional manufacturing processes are not practical for the fabrication of these intricate metal metamaterials, and not everyone has a laser powder bed fusion machine in their warehouse,” he said.
“However, as the technology develops, it will become more accessible and the printing process will become much faster, enabling a larger audience to implement our high-strength multi-topology metamaterials in their components. Importantly, metal 3D printing allows easy net shape fabrication for real applications.”
Technical Director of RMIT’s Advanced Manufacturing Precinct, Distinguished Professor Milan Brandt, said the team welcomed companies wanting to collaborate on the many potential applications.
“Our approach is to identify challenges and create opportunities through collaborative design, knowledge exchange, work-based learning, critical problem-solving and translation of research,” he said.
Original Article: 3D printed titanium structure shows supernatural strength
More from: Royal Melbourne Institute of Technology
The Latest Updates from Bing News
Go deeper with Bing News on:
3D printed metamaterial
- Desktop Metal's Reactive Safety Kit enables binder jet 3D printing of titanium & aluminium materials
Users of Desktop Metal’s Production System P-1 will now be able to process reactive metals like titanium and aluminium after the company launched the Reactive Safety Kit.
- The walls of this $130,000 3D printed home were built in 18 hours — see what it's like inside
Portugal-based startup Havelar says it can build a new home in two months. The walls of its new two-bed home were printed in 18 hours.
- MIT spin-off Rapid Liquid Print raises $7M for 3D printing
MIT spin-off Rapid Liquid Print has raised $7 million in funding for its novel liquid-based 3D printing technology.
- This gigantic 3D printer could reinvent manufacturing
A massive additive manufacturing device that can build houses, and a whole lot more has just been unveiled at the University of Maine.
- 3D Printing Finds a Home
“Prefabricated 3D printed homes reduce the amount of labor required to build a home, thereby making homes safer, potentially cheaper, and much faster from design to completion,” says Buff López, an ...
Go deeper with Bing News on:
Metal 3D printing
- Desktop Metal's Reactive Safety Kit enables binder jet 3D printing of titanium & aluminium materials
Users of Desktop Metal’s Production System P-1 will now be able to process reactive metals like titanium and aluminium after the company launched the Reactive Safety Kit.
- Chamlion Unveils Advanced Dental 3D Printing Solutions at IDEX 2024 Exhibition
Chamlion, a gamechanging force in the digitalization of dentistry, is set to captivate attendees at the International Dental ...
- Farsoon introduces large-format 12-laser metal 3D printer at TCT Asia
The developer of polymer laser sintering and metal laser melting systems says the FS811M features one of the biggest build volumes on the metal laser powder bed fusion market at 840 × 840 x 960mm.
- NREL Advances Sustainable Marine Energy Technology With 3D Printing
NREL researchers have partnered with the Pacific Northwest National Laboratory to explore 3D printing's potential in marine energy technology.
- Shhh! 3 Secret 3D Printing Stocks Flying Below Wall Street’s Radar
InvestorPlace - Stock Market News, Stock Advice & Trading Tips One of the best investment strategies for long-term growth is twofold: pick an ...