Using the right chemistry, it is possible to combine two different atomic arrangement (yellow and blue slabs) that provide mechanisms to slow down the motion of heat through a solid.
A collaborative research team, led by the University of Liverpool, has discovered a new inorganic material with the lowest thermal conductivity ever reported. This discovery paves the way for the development of new thermoelectric materials that will be critical for a sustainable society.
The discovery, reported in the journal Science, represents a breakthrough in the control of heat flow at the atomic scale, achieved by materials design. It offers fundamental new insights into the management of energy. The new understanding will accelerate the development of new materials for converting waste heat to power and for the efficient use of fuels.
The research team, led by Professor Matt Rosseinsky at the University’s Department of Chemistry and Materials Innovation Factory and Dr Jon Alaria at University’s Department of Physics and Stephenson Institute for Renewable Energy, designed and synthesised the new material so that it combined two different arrangements of atoms that were each found to slow down the speed at which heat moves through the structure of a solid.
They identified the mechanisms responsible for the reduced heat transport in each of these two arrangements by measuring and modelling the thermal conductivities of two different structures, each of which contained one of the required arrangements.
Combining these mechanisms in a single material is difficult, because the researchers have to control exactly how the atoms are arranged within it. Intuitively, scientists would expect to get an average of the physical properties of the two components. By choosing favourable chemical interfaces between each of these different atomic arrangements, the team experimentally synthesized a material that combines them both.
This new material, with two combined arrangements, has a much lower thermal conductivity than either of the parent materials with just one arrangement. This unexpected result shows the synergic effect of the chemical control of atomic locations in the structure, and is the reason why the properties of the whole structure are superior to those of the two individual parts.
If we take the thermal conductivity of steel as 1, then a titanium bar is 0.1, water and a construction brick is 0.01, the new material is 0.001 and air is 0.0005.
Professor Matt Rosseinsky said: “The material we have discovered has the lowest thermal conductivity of any inorganic solid and is nearly as poor a conductor of heat as air itself.
“The implications of this discovery are significant, both for fundamental scientific understanding and for practical applications in thermoelectric devices that harvest waste heat and as thermal barrier coatings for more efficient gas turbines.”
Dr Jon Alaria said: “The exciting finding of this study is that it is possible to enhance the property of a material using complementary physics concepts and appropriate atomistic interfacing. Beyond heat transport, this strategy could be applied to other important fundamental physical properties such as magnetism and superconductivity, leading to lower energy computing and more efficient transport of electricity.”
Approximately 70 percent of all the energy generated in the world is wasted as heat. Low thermal conductivity materials are essential to reduce and harness this waste. The development of new and more efficient thermoelectric materials, which can convert heat into electricity, is considered a key source of clean energy.
Original Article: Researchers discover inorganic material with lowest thermal conductivity ever reported
More from: University of Liverpool | University College London | Rutherford Appleton Laboratory | Centre National de la Recherche Scientifique
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
New materials for converting waste heat to power
- Exceptionally large transverse thermoelectric effect produced by combining thermoelectric and magnetic materials
A NIMS research team has demonstrated for the first time ever that a simple stack of thermoelectric and magnetic material layers can exhibit a substantially larger transverse thermoelectric ...
- Oriental Energy turns waste into power for greener biz
With the new Waste Heat to Power (WHP) system in place, steam turbines are driven by waste steam and generate around 17.4 million kilowatt-hours of electricity annually. As a result, the company ...
- First of its Kind Partnership Delivers a Waste Heat to Power Project That Will Reduce the University of Dayton’s Carbon Footprint by More Than 70%
The new waste heat to power facility will capture the heat produced by an existing process and generate decarbonized power, which will be sold to AES Ohio for the benefit of the University of Dayton.
- Department Thermoelectric Materials and Systems
For optimal use, thermoelectric (TE) materials and modules ... These systems, as manageable power producers, provide: Supply stability Storage options Self-sufficiency Optimized efficiency by ...
- Researchers develop a thermoelectric material with optimal cost, efficiency and flexibility
Thermoelectric technology, an energy conversion technology between heat and electricity, represents an eco-friendly approach to converting waste ... power supply energy harvesters in advanced new ...
Go deeper with Google Headlines on:
New materials for converting waste heat to power
[google_news title=”” keyword=”new materials for converting waste heat to power” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Converting waste heat to power
- Exceptionally large transverse thermoelectric effect produced by combining thermoelectric and magnetic materials
A NIMS research team has demonstrated for the first time ever that a simple stack of thermoelectric and magnetic material layers can exhibit a substantially larger transverse thermoelectric ...
- Why we need to reuse waste energy to achieve net-zero heating systems
We’re already pushing the system on the hottest days of the year to keep our electric air conditioning running, mainly by supplementing with inefficient carbon-producing natural gas or coal power ...
- Transforming common soft magnets into next-generation thermoelectric conversion materials with 3-minute heat treatment
A research team from NIMS and Nagoya University has demonstrated that an iron-based amorphous alloy, widely used as a soft magnetic material in transformers and motors, can be transformed into a ...
- Oriental Energy turns waste into power for greener biz
which is expected to effectively convert waste steam into electricity and thereby help lower the company's energy expenses. Focusing on hydrogen power, Nanjing, Jiangsu-based Oriental Energy produces ...
- First of its Kind Partnership Delivers a Waste Heat to Power Project That Will Reduce the University of Dayton’s Carbon Footprint by More Than 70%
The new waste heat to power facility will capture the heat produced by an existing process and generate decarbonized power, which will be sold to AES Ohio for the benefit of the University of Dayton.
Go deeper with Google Headlines on:
Converting waste heat to power
[google_news title=”” keyword=”converting waste heat to power” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]