Researchers have designed an off-grid, low-cost modular energy source that uses radiative cooling to efficiently produce power for lighting at night.
CREDIT
Lingling Fan and Wei Li, Stanford University
Rooftop radiative cooling system could provide lighting power when solar energy is unavailable
Researchers have designed an off-grid, low-cost modular energy source that can efficiently produce power at night. The system uses commercially available technology and could eventually help meet the need for nighttime lighting in urban areas or provide lighting in developing countries.
Although solar power brings many benefits, its use depends heavily on the distribution of sunlight, which can be limited in many locations and is completely unavailable at night. Systems that store energy produced during the day are typically expensive, thus driving up the cost of using solar power.
To find a less-expensive alternative, researchers led by Shanhui Fan from Stanford University looked to radiative cooling. This approach uses the temperature difference resulting from heat absorbed from the surrounding air and the radiant cooling effect of cold space to generate electricity.
In The Optical Society (OSA) journal Optics Express, the researchers theoretically demonstrate an optimized radiative cooling approach that can generate 2.2 Watts per square meter with a rooftop device that doesn’t require a battery or any external energy. This is about 120 times the amount of energy that has been experimentally demonstrated and enough to power modular sensors such as ones used in security or environmental applications.
“We are working to develop high-performance, sustainable lighting generation that can provide everyone – including those in developing and rural areas – access to reliable and sustainable low cost lighting energy sources,” said Lingling Fan, first author of the paper. “A modular energy source could also power off-grid sensors used in a variety of applications and be used to convert waste heat from automobiles into usable power.”
Maximizing power generation
One of the most efficient ways to generate electricity using radiative cooling is to use a thermoelectric power generator. These devices use thermoelectric materials to generate power by converting the temperature differences between a heat source and the device’s cool side, or radiative cooler, into an electric voltage.
In the new work, the researchers optimized each step of thermoelectric power generation to maximize nighttime power generation from a device that would be used on a rooftop. They improved the energy harvesting so that more heat flows into the system from the surrounding air and incorporate new commercially available thermoelectric materials that enhance how well that energy is used by the device. They also calculated that a thermoelectric power generator covering one square meter of a rooftop could achieve the best trade-off between heat loss and thermoelectric conversion.
“One of the most important innovations was designing a selective emitter that is attached to the cool side of the device,” said Wei Li, a member of the research team. “This optimizes the radiative cooling process so that the power generator can more efficiently get rid of excessive heat.”
The researchers demonstrated the new approach by using computer modeling to simulate a system with realistic physical parameters. The models reproduced previous experimental results faithfully and revealed that the optimized system designed by the researchers could come close to what has been calculated as the maximum efficiency using thermoelectric conversion.
In addition to carrying out experiments, the researchers are also examining optimal designs for operating the system during the day, in addition to nighttime, which could expand the practical applications of the system.
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Rooftop radiative cooling
- Researchers demonstrate enhanced radiative heat transfer for nanodevices
Some cooling occurs when heat is radiated away as electromagnetic ... The University of Tokyo, showed how the rate of radiative heat transfer can be doubled between two micro-scale silicon plates ...
- Beat the heat with radiative cooling
Some cooling occurs when heat is radiated away as electromagnetic ... In a study published in the journal Physical Review Letters ("Enhanced Far-field Thermal Radiation through a Polaritonic Waveguide ...
- i2Cool Attracts Close to HKD100 Million in Series A Financing to Propel the Development of Green and Energy-Efficient Radiative Cooling Solutions
PRNewswire/ -- i2Cool, a company specializing in electricity-free cooling technology, has attracted nearly HKD100 million (USD13.8 million) in its Series A round financing from Trustar Capital (the ...
- Hotter times will drive rooftop solar value
An analysis suggests rooftop solar will increase in value by between 19 to 25% due to warming and changing weather patterns increasing onsite electricity demand.
- Climate change to drive value of rooftop solar
University of Michigan researchers have found that the value of rooftop solar will increase by between 5% and 15% by the mid-century across a range of U.S. cities under moderate climate change, and by ...
Go deeper with Google Headlines on:
Rooftop radiative cooling
[google_news title=”” keyword=”rooftop radiative cooling” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Thermoelectric power generator
- Exceptionally large transverse thermoelectric effect produced by combining thermoelectric and magnetic materials
A NIMS research team has demonstrated for the first time ever that a simple stack of thermoelectric and magnetic material layers can exhibit a substantially larger transverse thermoelectric ...
- NASA’s mini nuclear power generators step closer to reality
NASA approved a project led by the Rochester Institute of Technology aimed at creating a nuclear power source significantly smaller than those currently used in planeta ...
- It May be Possible to Power Implantable Generators with Our Bodies
Researchers are trying to solve the problem of powering implantable devices to help improve and save lives.
- Ion thermoelectric conversion devices for near room temperature
and the Prussian blue on the electrode undergoes a redox reaction to improve the energy density and power density of the ionic thermoelectric generator. New research on this topic appears in ...
- Power and heat generation with thermoelectric generators
Thermoelectric generators (TEGs) have the potential to close this energy supply gap in a climate-neutral and economical way. The TEGs are integrated into the building heating system and the heat ...
Go deeper with Google Headlines on:
Thermoelectric power generator
[google_news title=”” keyword=”thermoelectric power generator” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]