The glare from solar farms could be a thing of the past, thanks to scientists at Loughborough University.
Researchers have developed a multi-layer anti-reflection (AR) coating for glass surfaces, which reduces the sun’s reflection from photovoltaic panels while at the same time improving their efficiency.
The coating was developed by researchers at the Centre for Renewable Energy and Sustainable Technology (CREST) who believe it will be attractive to solar panel manufacturers.
It is applied using the same technology as that used for depositing anti-reflection coatings on spectacles.
Professor Michael Walls, one of three CREST members who came up with the multi-layer AR design, said: “We really want to see these AR coatings implemented by manufacturers.
“They improve the module power output by about four per cent and will be low cost if manufactured in high volume.
“It’s a great added value proposition for float glass manufacturers.”
Each glass surface reflects about four per cent of the incident light, representing a significant loss of light into the module.
The AR design, developed by Professor Walls, Dr Piotr Kaminski and Fabiana Lisco, reduces the reflection by more than 70 per cent across the wavelength range accepted by PV panels.
The effectiveness of the coating is demonstrated in Picture 1 where a glass cover sheet has been placed above a crystalline silicon PV cell.
The area covered by the AR coated glass is clearly visible whereas the part of the cell covered with non-coated glass is obscured by reflections.
The design consists of only four alternate layers of zirconium oxide and silicon dioxide and the whole stack is less than 300 nanometres thick.
These materials were chosen because they are abundant and low cost.
Dr Kaminski said: “The AR coating has to be cost effective and so the design is a compromise. We want the best quality AR coating but with inexpensive materials and as few layers as possible. Also, the whole stack should be very thin to save time in manufacturing.”
The coatings are deposited using magnetron sputtering by a machine developed by UK based Power Vision Ltd to deposit AR coatings on spectacle lenses.
Although the work is specifically aimed at the improvement in efficiency of thin film Cadmium Telluride solar cell devices, the coatings can be applied to other thin film technologies such as CIGS (copper indium gallium selenide) and amorphous silicon.
They can also be applied to cover glass on crystalline silicon modules and even third generation devices such as organic or perovskite devices.
Dr Kaminski said: “Each PV technology operates in a different wavelength range and it is relatively simple to accommodate this in the multilayer design for each case”.
Magnetron sputtering is an easily scaleable technology already used by glass manufacturers for other types of coatings.
The materials are scratch resistant and very durable and would be effective for the full 25 year warranty offered by PV module manufacturers.
The Latest on: Solar panel glare
[google_news title=”” keyword=”Solar panel glare” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Solar panel glare
- Scaled back Dewittville solar project still opposed by residentson May 15, 2024 at 11:29 pm
A proposed solar project in the Dewittville area that has been scaled back is still meeting opposition from neighbors. During the recent Chautauqua Town Board meeting, Steve Long with Sol Source Power ...
- Mastercard bids for 779 solar panels at Harrogate officeson May 15, 2024 at 4:44 am
Mastercard has put in a bid to erect 779 solar panels at offices in a Harrogate business park. The company owns payment systems provider Vocalink, which has a base at Cardale Park, off Otley Road. The ...
- “Terracotta” solar: New 400W PV modules blend in with red clay rooftopson May 8, 2024 at 10:34 pm
Austrian solar manufacturer unveils a new 400W glass-glass TOPCon solar panel that blends aesthetically with tiled terracotta roofs.
- 12 types of roofing materials: Guide to choosing the best ones for youon May 8, 2024 at 5:00 pm
Editorial note: Homefront (defined in the Disclosure below) may earn a commission from affiliate partner links featured on our site. This commission does not influence our editors’ opinions or ...
- Tale of 2 solar projects: How 1 garnered support and the other, disdainon May 1, 2024 at 3:39 am
Vicki Duhamel, who lives on Salem Church Street in Washington Township, said she voiced concerns about glare from the solar panels and how they will impact the view from her home at public meetings.
- Plans for huge solar farm described as frighteningon April 27, 2024 at 5:00 pm
Lightsource bp wants to build the solar panels across three sites in northern ... "From where I live there is a glare from them… will they take away from the value of our houses?
- Letter to editor concerning solar energy projectson April 9, 2024 at 5:00 pm
What does SC DHEC suggest for end of life solar panels/projects? 15. What will the impact of solar glare be as the solar panels track the sun during the day on our county airport and airstrips of ...
- Officials recommend against 440-acre solar farm in northern Berkson June 23, 2023 at 9:34 am
and the possible safety impacts of solar panel glare on drivers. "More than a couple residents have considered relocating if this goes through," Ron Stabile said. "Has there ever been another ...
- Solar farm close to ‘England’s finest view’ is rejectedon January 19, 2023 at 8:05 am
Councillors were told there remained concerns over flying safety issues from glare from the solar panels on aircraft using Baxby Airfield, the uses of which include training for pilots ...
- Solar poweron June 7, 2022 at 1:00 am
Ground solar also requires title searches. While many sites have little issue receiving permitted consent, planning consent can depend on a range of factors, such as if glare from the panels would ...
via Bing News