“One should consider that the production cost of this type of solar cell is several orders of magnitude lower than for conventional solar cells.”
The sharp X-ray vision of DESY‘s research light source PETRA III paves the way for a new technique to produce cheap, flexible and versatile double solar cells. The method developed by scientists from the Technical University of Denmark (DTU) in Roskilde can reliably produce efficient tandem plastic solar cells of many metres in length.
The scientists used a production process, where the different layers of a polymer (plastic) solar cell are coated from various solutions onto a flexible substrate. This way, the solar cell can be produced fast and cheap in a roll-to-roll process and in almost any desired length – up to several kilometers long single solar cell modules have already been manufactured. However, the energy harvesting efficiency of this type of solar cell is not very high. To increase the efficiency, a DTU team around Frederik C. Krebs stacked two such solar cells onto each other. Each of these absorbs a different part of the solar spectrum, so that the resulting tandem polymer solar cell converts more of the incoming sunlight into electric energy.
But the multilayer coating presents several new challenges, as Andreasen explained: “Lab studies have shown that already coated layers may be dissolved by the solvent from the following layer, causing complete failure of the solar cell.” To prevent redissolution of the first solar cell, the scientists added a carefully composed protective intermediate coating between the two solar cells. The protective coating contains a layer made of zinc oxide (ZnO) that is just 40 nanometres thick – about a thousand times thinner than a human hair.
To check shape and function of the protective coating and the other layers of the tandem solar cell, the scientists used the exceptionally sharp X-ray vision of DESY’s research light source PETRA III that can reveal finest details. “The solar cell structure is very delicate, consisting of twelve individual layers altogether. Imaging the complete structure is challenging,” explained co-author Juliane Reinhardt from DESY’s experimental station P06 where the investigations were made. “And the sample was just two by four microns in size.”
Still, with the brilliant X-ray beam from PETRA III, the researchers could peer into the layer structure in fine detail, using a technique called 3D ptychography. This method reconstructs the three-dimensional shape and chemistry of a sample from the way it diffracts the incoming X-rays. For a full 3D reconstruction a great number of overlapping X-ray diffraction images have to be recorded from all sides and angles. The advantage of ptychography is that it yields a higher resolution than would be possible with conventional X-ray imaging alone. And in contrast to electron microscopy, X-ray ptychography can also look deep inside the sample.
“With 3D ptychography, we were able to image the complete roll-to-roll coated tandem solar cell, showing, among other things, the integrity of the 40 nanometres thin zinc oxide layer in the protective coating that successfully preserved underlying layers from solution damage,” said DESY scientist Gerald Falkenberg, head of the experimental station P06. “These are the 3D ptychography measurements with the highest spatial resolution we have achieved so far. The results show that with the correct formulation of the intermediate layer, the underlying solar cell is protected from redissolution.”
The investigation paves the way to a possible industrial application of the new technique. “In a complex multilayer device like a polymer tandem solar cell, the device may fail in multiple ways,” Andreasen pointed out. “What we were able to see with 3D ptychography was that the preparation of the substrate electrode combines the good conductivity of a coarsely structured silver electrode with the good film forming ability of a conducting polymer that infiltrates the silver electrode and forms a smooth surface for the coating of the subsequent layers.” This is what allows the coating of very thin layers, at very high speeds, still forming contiguous layers, without pinholes.
Take me to the complete story . . .
The Latest on: Solar cell production
[google_news title=”” keyword=”solar cell production” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Solar cell production
- How Do Solar Panels Work?on April 27, 2024 at 5:00 am
Find out how solar cells power a good portion of homes today—and how they might power virtually everything in the future.
- Researchers outline path forward for tandem solar cellson April 26, 2024 at 7:22 am
As the old saying goes, two heads are better than one. The same is true when it comes to solar cells working in tandem. Researchers at the U.S. Department of Energy's National Renewable Energy ...
- IRA should incentivize steel solar frames, says reporton April 26, 2024 at 6:50 am
A report from Origami Solar and Wood Mackenzie advises that if the U.S. solar industry switched from aluminum to recycled steel frames, it would no longer need to import aluminum frames from Asia.
- Born in the USA: First silicon solar cell celebrates 70th birthdayon April 25, 2024 at 11:02 am
U.S. researchers presented the first prototype of a usable solar module. The efficiency at that time was around 6%. A lot has happened since then.
- Key Solar Panel Ingredient Is Made in the U.S.A. Againon April 25, 2024 at 8:17 am
REC Silicon says it will soon start shipping polysilicon, which has come mostly from China, reviving a Washington State factory that shut down in 2019.
- Korea Solar Maker Qcells to Shut Down Production in Chinaon April 25, 2024 at 12:11 am
A solar manufacturing unit of the South Korean conglomerate Hanwha Solutions Corp. will terminate operations in China as the company expands its US presence, according to filings.
- CESI Solar Cells Fuels the Satellites of the Global Interneton April 24, 2024 at 6:17 am
MILAN, ITALY / ACCESSWIRE / April 24, 2024 / The Italian group CESI has secured a contract, with options valued at over one hundred million euros over five years, with ...
- Solar Energy Newson April 23, 2024 at 5:00 pm
Perovskite Solar Cells: Vacuum Process May Offer a Short Track to Commercialization Mar. 14, 2024 — Which process is best suited for mass production of perovskite solar cells? While solvent ...
- Saudi Arabia's oil giant boss speaks up for China, saying its massive production of solar panels and EVs helps affordabilityon April 23, 2024 at 12:23 am
The comments come as the West has stepped up criticism of China's dumping of cheap green products on the global markets.
- Pros and cons of solar energyon April 18, 2024 at 7:13 am
Solar power could become the primary source of electricity worldwide by 2050 – but there are still clouds in the forecast ...
via Bing News