As thousands of bridges, parking garages and other structures age, improved methods for detecting deterioration could save lives and prevent economic disruption.
Major bridge failures in recent years have focused attention on the need to monitor America’s highway bridges and other infrastructure. As thousands of bridges, parking garages and other structures age, improved methods for detecting deterioration could save lives and prevent economic disruption.
Researchers at the Georgia Institute of Technology are developing a novel technology that would facilitate close monitoring of structures for strain, stress and early formation of cracks. Their approach uses wireless sensors that are low cost, require no power, can be implemented on tough yet flexible polymer substrates, and can identify structural problems at a very early stage. The only electronic component in the sensor is an inexpensive radio-frequency identification (RFID) chip.
Moreover, these sensor designs can be inkjet-printed on various substrates, using methods that optimize them for operation at radio frequency. The result would be low-cost, weather-resistant devices that could be affixed by the thousands to various kinds of structures.
“For many engineering structures, one of the most dangerous problems is the initiation of stress concentration and cracking, which is caused by overloading or inadequate design and can lead to collapse – as in the case of the I-35W bridge failure in Minneapolis in 2007,” said Yang Wang, an assistant professor in the Georgia Tech School of Civil and Environmental Engineering. “Placing a ‘smart skin’ of sensors on structural members, especially on certain high-stress hot spots that have been pinpointed by structural analysis, could provide early notification of potential trouble.”
Wang is collaborating with a team that includes professor Manos M. Tentzeris of the School of Electrical and Computer Engineering, and Roberto Leon, a former Georgia Tech professor who recently moved to Virginia Tech. The work is supported by the Federal Highway Administration.
This research was recently reported in IEEE Antennas and Wireless Propagation Letters, Volume 11, 2012, and International Journal of Smart and Nano Materials, Volume 2, 2011. Parts of this research were also presented at ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) and several other conferences.
Antennas as Sensors
The Georgia Tech research team is focusing on wireless sensor designs that are passive, which means they need no power source. Instead, these devices respond to radio-frequency signals sent from a central reader or hub. One such reader can interrogate multiple sensors, querying them on their status at frequent intervals.
The researchers’ approach utilizes a small antenna mounted on a substrate and tuned to a specific radio frequency. This technique enables the antenna itself to function as a stress sensor.
As long as the structural member to which the antenna/sensor is affixed remains entirely stable, its frequency stays the same. But even a slight deformation in the structure also deforms the antenna and alters its frequency response. The reader can detect that change at once, initiating a warning months or years before an actual collapse.
“A key benefit of this technology is that it’s completely wireless,” Wang said. “It doesn’t require a battery, and you don’t have to climb around on bridges running long connecting cables.”
The research team has developed a prototype strain/crack sensor that has been successfully tested in the laboratory, Wang said. The simple device consists of a small piece of copper mounted on a polymer substrate, plus a 10-cent 1mm by 1mm RFID chip. The chip is used to distinguish each individual sensing unit from others. The simple sensor architecture allows it to be made at very low cost and to potentially be deployed in large quantities on any bridge.
Inkjet-Printed Circuits
More sophisticated designs are in the works. Tentzeris’ team is tackling an approach that produces strain sensors using different applications of inkjet printing technology.
One such design uses a silver-nanoparticle-based ink that is applied to a flexible or semi-flexible substrate, said Rushi Vyas, a Ph.D. student working with Tentzeris. The ink lays down a structure that can change properties in response to strain.
A second approach involves the use of inkjet-printed carbon-nanotube-based structures, Vyas said. In this case, the nanotubes themselves produce an altered response when subjected to deformation.
In laboratory testing, the team’s prototype sensors have demonstrated high sensitivity in response to even slight changes in metal structures, Wang said. The sensors have been able to reliably detect a degree of deformation change as low as tens of microstrains (one microstrain equals 0.0001 percent, or 1 part per million), and they can continuously monitor stress accumulation until the metal develops a severe crack.
One issue still being addressed is the capacity of the passive sensor to respond to a reader. A reader transmits a radio-frequency beam to a sensor, which utilizes that received energy to reflect a signal back to the reader.
But this technique can be rather inefficient, Vyas said. A signal from a reader might travel 50 feet, yet the sensor’s response might only travel back 10 feet. One issue is that readers are limited by FCC regulations, which govern how much power can be transmitted to the sensor.
The Latest Bing News on:
Remote Monitoring of Infrastructure
- 20 Persistent Cloud Myths Holding Businesses Backon May 9, 2024 at 7:15 am
There’s real promise for businesses across industries in moving to the cloud, especially with so many companies operating with remote teams ... innovation while providing a scalable and flexible ...
- How Government Agencies Can Leverage Grants to Shore Up Cybersecurityon May 9, 2024 at 7:00 am
With the help of grant funding, agencies and organizations can better defend themselves and their constituents.
- New service embraces space technologyon May 9, 2024 at 4:12 am
A Cornish company has launched a new initiative using space technology developed in partnership with the ESA (European Space Agency).
- Increasing Demand for Remote Patient Monitoring to Drive the Growth of the Tele-intensive Care Unit Market; says TN, The Niche Researchon May 7, 2024 at 5:19 am
Global Tele-intensive Care Unit Market to Reach Valuation of US$ 22.4 Bn by 2034; Anticipated to Experience CAGR of 14.2% During 2024 – 2034Wilmington, Delaware, May 07, 2024 (GLOBE NEWSWIRE) -- The ...
- Revolutionising infrastructure maintenance: The role of drones in powerline monitoringon May 3, 2024 at 5:01 pm
In the realm of infrastructure maintenance, particularly in the critical domain of powerline monitoring, the integration of drone technology has sparked a revolution. With the paramount goal of ...
- Boosting Sustainability With As-A-Service Device And Infrastructure Solutionson April 29, 2024 at 4:45 pm
Widespread change over the past few years has transformed the business landscape. A surge in hybrid and remote working, with 20% of organisations lo ...
- Building A Secure IT Infrastructure: Steps For Business Ownerson April 29, 2024 at 5:08 am
Cyber attacks are on an all-time high. This rise underscores a grave reality: no company is immune. Business owners grapple daily with threats like data breaches, ransomware, and insider attacks. Each ...
- Smart infant monitoring company Owlet partners with Wheelon April 25, 2024 at 4:13 pm
“We’re thrilled to announce our strategic partnership with Owlet, a leader in smart infant monitoring. This collaboration marks a significant milestone in our mission to expand healthcare access and ...
- Remote IT Management and Monitoring: An Overviewon April 21, 2024 at 5:00 pm
Learn what remote IT management and monitoring entail and the benefits ... Information technology departments must adapt their IT infrastructure to accommodate this new reality.
- Best IT infrastructure management service of 2024on April 16, 2024 at 12:31 am
But it also offers an infrastructure monitoring service that’s easy to ... ConnectWise is a well-known IT remote management platform. This platform is famous for its IT automation features ...
The Latest Google Headlines on:
Remote Monitoring of Infrastructure
[google_news title=”” keyword=”Remote Monitoring of Infrastructure” num_posts=”10″ blurb_length=”0″ show_thumb=”left”] [/vc_column_text]The Latest Bing News on:
Smart sensors
- SafePest Control: Revolutionising Pest Management with the Launch of Smart Digital Rodent Bait Stationson May 9, 2024 at 6:09 pm
SafePest Control, a leading provider of innovative pest management solutions, is proud to announce the launch of its latest breakthrough ...
- Smart Sensors Market Size, Industry Growth at a CAGR 17.1% [2029]on May 7, 2024 at 9:30 pm
Chicago, May 08, 2024 (GLOBE NEWSWIRE) -- The smart sensors market Size was valued at USD 61.9 billion in 2024 and is projected to reach USD 136.3 billion by 2029; it is expected to grow at a CAGR of ...
- iPhone 16 Cameras: Big Sensors and Long Zooms, Here Are All the Rumors to Knowon May 7, 2024 at 4:00 am
According to a MacRumors story, covering claims from Weibo user Digital Chat Station, the iPhone 16 Pro's main camera could have a larger image sensor. This would apparently be 1/1.14 inches in size, ...
- How FPGAs are Revolutionizing Sensor-to-Cloud Integration in Manufacturingon May 6, 2024 at 12:13 pm
As manufacturers strive to optimize efficiency with automation, the importance of sensor-to-cloud connectivity cannot be overstated. With more sensors on factory floors than ever before, companies are ...
- Tech That Makes A Green Thumb A Smart Thumbon May 6, 2024 at 9:20 am
For many years, gardening was a pastime that would require know-how, work, and luck. While that is pretty much still true, technology is now available to make these tasks a bit less daunting and ...
- Lots of new smart home gear, cheap HomeKit sensors, & Matter 1.2 on HomeKit Insideron May 6, 2024 at 8:25 am
On this episode of the HomeKit Insider Podcast, we check out several new products and discuss the delay with vacuums in Matter 1.2.
- ResQ Announces New System and Sensors to Simplify Operationson May 6, 2024 at 7:51 am
ResQ, the leading modern facility management platform, announced a new internal technician management and sensors product that empowers multi-location operators to unlock insights for all their ...
- Use AI And Machine Learning To Capitalize On Smart Building Dataon May 3, 2024 at 4:30 am
The same data-driven machine learning principles that power GenAI, when applied to building IoT data, can help organizations optimize well-being and productivity.
- AI-Enabled Smart Sensor Prototype Funded For MQ-9on May 2, 2024 at 3:11 pm
AI-Enabled Smart Sensor Prototype Funded For MQ-9 is published in Aerospace Daily & Defense Report, an Aviation Week Intelligence Network (AWIN) Market Briefing and is included with your AWIN ...
- Smart Sensors Market Upcoming Trends, Size, Key Players, Revenue, Share, and Forecast 2024 to 2032on April 28, 2024 at 10:48 pm
report_id=30734 Smart sensor is a combination of a sensor with signal conditioning, embedded algorithms, and digital interface. These sensors enable collection of accurate environmental data with ...
The Latest Google Headlines on:
Smart sensors
[google_news title=”” keyword=”smart sensors” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]