SCMR effect simplifies the design of fundamental spintronic components
The transition from light bulbs to LEDs has drastically cut the amount of electricity we use for lighting. Most of the electricity consumed by incandescent bulbs was, after all, dissipated as heat. We may now be on the verge of a comparable breakthrough in electronic computer components. Up to now, these have been run on electricity, generating unwanted heat. If spin current were employed instead, computers and similar devices could be operated in a much more energy-efficient manner. Dr. Olena Gomonay from Johannes Gutenberg University Mainz (JGU) in Germany and her team together with Professor Eiji Saitoh from the Advanced Institute for Materials Research (AIMR) at Tohoku University in Japan and his work group have now discovered an effect that could make such a transition to spin current a reality. This effect significantly simplifies the design of fundamental spintronic components.
Touching a computer that has been running for some time, you will feel heat. This heat is an – undesirable – side effect of the electric current. Undesirable because the heat generated, naturally, also consumes energy. We are all familiar with this effect from light bulbs, which became so hot after being on for hours that they could burn your fingers. This is because light bulbs converted only a fraction of the energy required to do their job of creating light. The energy used by LEDs, on the other hand, is almost completely used for lighting, which is why they don’t become hot. This makes LEDs significantly more energy-efficient than traditional incandescent bulbs.
Instead of using an electric current composed of charged particles, a computer using a stream of particles with a spin other than zero could manipulate the material of its components in the same way to perform calculations. The primary difference is that no heat is generated, the processes are much more energy-efficient. Dr. Olena Gomonay from Mainz University and Professor Eiji Saitoh from Tohoku University have now laid the foundations for using these spin currents. More precisely, they have used the concept of spin currents and applied it to a specific material. Gomonay compares the spin currents involved with how our brains work: “Our brains process immeasurable amounts of information, but they don’t heat up in the process. Nature is, therefore, way ahead of us.” The team from Mainz is hoping to emulate this model.
Drastic change in current flow
How well spin currents flow depends on the material – just like in the case of electric current. While spin currents can always flow in ferromagnetic materials, in antiferromagnetic materials states with low resistance alternate with those with high resistance. “We have now found a way to control spin currents by means of a magnetic field and temperature, in other words, to control the resistance of an antiferromagnetic system based on spin,” explained Gomonay, summarizing her results.
At a temperature close to the phase transition temperature, Gomonay and her team applied a small magnetic field to the material. While the applied magnetic field alters the orientation of the spin currents to allow them to be easily transported through the material, the temperature has precisely two effects. On the one hand, a higher temperature causes more particles of the material to be in excited states, meaning there are more spin carriers that can be transported, which makes spin transport easier. On the other hand, the high temperature makes it possible to operate at a low magnetic field.
Thus the resistance and the current flow change drastically by several orders of magnitude. “This effect, which we call spin colossal magnetoresistance or SCMR for short, has the potential to simplify the design of fundamental spintronic components significantly,” explained the scientist from Mainz. This is particularly interesting for storage devices such as hard disks. This effect might be employed, for example, to create spin current switches as well as spin current based storage media.
Learn more: Energy-efficient spin current can be controlled by magnetic field and temperature
The Latest on: Spintronics
[google_news title=”” keyword=”spintronics” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Spintronics
- When injecting pure spin into chiral materials, direction matterson May 4, 2024 at 1:31 am
Researchers from North Carolina State University and the University of Pittsburgh studied how the spin information of an electron, called a pure spin current, moves through chiral materials. They ...
- NVE Corp (NVEC) Reports Significant Revenue and Net Income Decline in Fiscal 2024on May 1, 2024 at 3:00 pm
Despite the downturn, NVE Corp announced a quarterly cash dividend of $1.00 per share of common stock, payable on May 31, 2024, to shareholders of record as of May 13, 2024. This move underscores the ...
- Revolutionizing Technology: Spintronics Market Surges, Expected to Reach US$ 1.4 Billion by 2033on April 29, 2024 at 5:18 am
Spintronics Market is set to cross worth of US$ 1,394.2 Million at 7.3% CAGR during forecast period 2023 to 2033 | Data analysis by Future Market Insights, Inc.
- A Paradigm Shift in RAM Is About to Make Computing Unstoppableon April 24, 2024 at 5:30 am
Every computer needs Random Access Memory (or RAM) for an operating system’s temporary storage, and there’s many ways to achieve this need for memory speed. One of the leading methods is ...
- Spintronics research shows material's magnetic properties can predict how a spin current changes with temperatureon April 23, 2024 at 10:38 am
Spintronics exploits the intrinsic spin of electrons, and fundamental to the field is controlling the flows of the spin degree of freedom, i.e., spin currents. Scientists are focused on ways to ...
- Spintronics research shows material's magnetic properties can predict how a spin current changes with temperatureon April 22, 2024 at 4:59 pm
Spintronics is a field garnering immense attention for its range of potential advantages for conventional electronics. These include reducing power consumption, high-speed operation, non ...
- Spintronics: A new path to room temperature swirling spin textureson April 17, 2024 at 10:22 am
Examples of such structures are magnetic bubbles, skyrmions, and magnetic vortices. Spintronics aims to make use of such tiny magnetic structures to store data or perform logic operations with very ...
- Spintronics: A new path to room temperature swirling spin textureson April 16, 2024 at 5:01 pm
Examples of such structures are magnetic bubbles, skyrmions, and magnetic vortices. Spintronics aims to make use of such tiny magnetic structures to store data or perform logic operations with ...
- Spintronics Using Altermagnets and Antiferromagnetson April 8, 2024 at 5:00 pm
The field of spintronics has, so far, focused on magnetic systems with uncompensated order, i.e. ferromagnets and ferrimagnets. Both these systems can be easily studied using conventional ...
via Bing News