‘Green’ process runs on sunlight
Sandia National Laboratories researchers seeking to make hydrogen a less expensive fuel for cars have upgraded a catalyst nearly as cheap as dirt — molybdenum disulfide, “molly” for short — to stand in for platinum, a rare element with the moonlike price of $1,500 a gram.
Sandia-induced changes elevate the plentiful, 37-cents-a-gram molly from being a welterweight outsider in the energy-catalyst field — put crudely, a lazy bum that never amounted to much — to a possible contender with the heavyweight champ.
The improved catalyst, expected to be the subject of an Oct. 7 Nature Communications paper, has already released four times the amount of hydrogen ever produced by molly from water. To Sandia postdoctoral fellow and lead author Stan Chou, this is just the beginning: “We should get far more output as we learn to better integrate molly with, for example, fuel-cell systems,” he said.
An additional benefit is that molly’s action can be triggered by sunlight, a feature which eventually may provide users an off-the-grid means of securing hydrogen fuel.
Hydrogen fuel is desirable because, unlike gasoline, it doesn’t release carbon into the atmosphere when burned. The combustion of hydrogen with oxygen produces an exhaust of only water.
In Chou’s measured words, “The idea was to understand the changes in the molecular structure of molybdenum disulfide (MOS?), so that it can be a better catalyst for hydrogen production: closer to platinum in efficiency, but earth-abundant and cheap. We did this by investigating the structural transformations of MOS? at the atomic scale, so that all of the materials parts that were ‘dead’ can now work to make H? [hydrogen].”
The rind of an orange
in what sense were the parts “dead,” one might ask?
Visualize an orange slice where only the rind of the orange is useful; the rest — the edible bulk of the orange — must be thrown away. Molly exists as a stack of flat nanostructures, like a pile of orange slices. These layers are not molecularly bolted together like a metal but instead are loose enough to slide over one another — a kind of grease, similar to the structure of graphene, and with huge internal surface areas.
But here’s the rub: While the edges of these nanostructures match platinum in their ability to catalyze hydrogen, the relative immense surface area of their sliding interiors are useless because their molecular arrangements are different from their edges. Because of this excess baggage, a commercial catalyst would require a huge amount of molly. The slender edges would work hard like Cinderella, but the stepsister interiors would just hang out, doing nothing.
Chou, who works on two-dimensional materials and their properties, thought the intent should be to get these stepsisters jobs.
Empowering the center
“There are many ways to do this,” said co-author Bryan Kaehr, “but the most scalable way is to separate the nanosheets in solution using lithium. With this method, as you pull the material apart, its molecular lattice changes into different forms; the end product, as it turns out, is catalytically active like the edge structure.”
To determine what was happening, and the best way to make it happen, the Sandia team used computer simulations generated by coauthor Na Sai from the University of Texas at Austin that suggested which molecular changes to look for. The team also observed changes with the most advanced microscopes at Sandia. including the FEI Titan, an aberration-corrected transmission electron microscope able to view atoms normally too small to see on most scopes.
“The extended test period made possible by the combined skills of our group allowed the reactions to be observed with the amount of detail needed,” said Chou.
Lacking these tools, researchers at other labs had ended their tests before the reaction could complete itself, like a cook taking sugar and water off the stove before syrup is produced, resulting in a variety of conflicting intermediate results.
Ending confusion
“Why Stan’s work is impactful is that there was so much confusion as to how this process works and what structures are actually formed,” said Kaehr. “He unambiguously showed that this desirable catalytic form is the end result of the completed reaction.”
Said Sandia Fellow and University of New Mexico professor Jeff Brinker, another paper author, “People want a non-platinum catalyst. Molly is dirt cheap and abundant. By making these relatively enormous surface areas catalytically active, Stan established understanding of the structural relation of these two-dimensional materials that will determine how they will be used in the long run. You have to basically understand the material before you can move forward in changing industrial use.”
Kaehr cautions that what’s been established is a fundamental proof of principle, not an industrial process. “Water splitting is a challenging reaction. It can be poisoned, stopping the molly reaction after some time period. Then you can restart it with acid. There are many intricacies to be worked out.
“But getting inexpensive molly to work this much more efficiently could drive hydrogen production costs way down.”
Read more: Way cheaper catalyst may lower fuel costs for hydrogen-powered cars
The Latest on: Hydrogen production
[google_news title=”” keyword=”hydrogen production” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Hydrogen production
- The 3 Top Hydrogen Stocks to Buy in April 2024on April 28, 2024 at 7:00 am
High interest rates seem to be plaguing many sectors of the economy. The electric vehicle space perhaps received the most coverage, but several renewable energy sectors are reeling from elevated rates ...
- Beaulieu: Hydrogen is not the answeron April 28, 2024 at 2:01 am
Solar power and battery storage are clean energy solutions but “clean hydrogen” and “green biofuels” are misnomers used by Granite Shore Power.
- This turquoise fuel is the end of hydrogen: it is obtained from clouds and metalon April 27, 2024 at 5:00 pm
Research into hydrogen as an alternative fuel source has been ongoing for decades, with most production methods resulting in carbon emissions that detract from hydrogen’s green potential. Turquoise ...
- World’s first hydrogen station for commercial trucks opens – is it too late?on April 27, 2024 at 7:58 am
FirstElement Fuels has opened the world's first large-scale hydrogen fueling station for heavy-duty commercial trucks at Port of Oakland.
- Nikola’s Hydrogen-Truck Fueling Strategyon April 26, 2024 at 11:58 am
Nikola’s Hyla Energy division is using modular hydrogen refueling stations to help bridge the chicken-and-egg gap between supply and demand for fuel-cell-electric trucks.
- Custom-made catalyst leads to longer-lasting and more sustainable green hydrogen productionon April 26, 2024 at 8:50 am
Researchers led by Ryuhei Nakamura at the RIKEN Center for Sustainable Resource Science (CSRS) in Japan have improved on their green and sustainable method of extracting hydrogen from water by using a ...
- Metal swarf transformed into electrodes for hydrogen productionon April 26, 2024 at 3:39 am
Nanotextured surface of titanium and nickel waste supports platinum and cobalt atoms to create effective electrocatalysts ...
- Plug Power within months of getting third green hydrogen factory runningon April 25, 2024 at 3:21 pm
COLONIE – Fuel cell maker Plug Power says it has completed the ramp up of its two first green hydrogen plants in Tennessee and Georgia, with its third plant expected to be completed in the third ...
- 3 Hydrogen Stocks to Buy on the Dip: April 2024on April 25, 2024 at 3:04 pm
InvestorPlace - Stock Market News, Stock Advice & Trading Tips Keep an eye on hydrogen stocks to buy on the dip. For one, according ...
- Green Hydrogen And Next-Gen Electrolyzers: Hystar’s CEO Calls For Norway’s Transitionon April 25, 2024 at 3:45 am
Hystar strives to become both a market and tech leader, producing both the energy source and the efficient electrolyzer technology to export worldwide.
via Bing News