When the robots of the future are set to extract minerals from other planets, they need to be both self-learning and self-repairing. Researchers at Oslo University have already succeeded in producing self-instructing robots on 3D printers.
On the third floor of the Department of Informatics there is a robotics laboratory which looks like a playroom This is where researchers are testing how their robots can figure out how to move past barriers and other obstacles.
“In the future, robots must be able to solve tasks in deep mines on distant planets, in radioactive disaster areas, in hazardous landslip areas and on the sea bed beneath the Antarctic. These environments are so extreme that no human being can cope. Everything needs to be automatically controlled. Imagine that the robot is entering the wreckage of a nuclear power plant. It finds a staircase that no-one has thought of. The robot takes a picture. The picture is analysed. The arms of one of the robots is fitted with a printer. This produces a new robot, or a new part for the existing robot, which enables it to negotiate the stairs,” hopes Associate ProfessorKyrre Glette who is part of the Robotics and intelligent systems research team at Oslo University’s Department of Informatics.
Three generations
Even if Glette’s ideas remain visions of the future, the robotics team in the Informatics Building have already developed three generations of self-learning robots.
Professor Mats Høvin was the man behind the first model, the chicken-robot named “Henriette”, which received much media coverage when it was launched ten years ago.
Henriette had to teach itself how to walk, and to jump over obstacles. And if it lost a leg, it had to learn, unaided, how to hop on the other leg.
A few years later, Masters student Tønnes Nygaard launched the second generation robot. At the same time, the Informatics team developed a simulation program that was able to calculate what the body should look like. Just as for Henriette, its number of legs was pre-determined, but the computer program was at liberty to design the length of the legs and the distance between them.
The third generation of robots brings even greater flexibility. The simulation programme takes care of the complete design and suggests the optimal number of legs and joints.
“We tell the simulation program what we would like the robot to do, how fast it should walk, its size and energy consumption. For instance, we may want the robot to be able to turn around and change direction, climb over boulders and walk on rugged ground,” says Kyrre Glette.
In response, the simulation program suggests the optimal solution, including the shape of the body and the number of legs. It simulates thousands of possibilities and produces the best models by means of artificial evolution.
In other words, the computer program comes up with a set of proposals for different robots designed for optimal functionality.
“None of them is intrinsically better than the others. The only difference is their strategies for solving the tasks,” says research fellow Eivind Samuelsen.
Unfortunately, it is difficult to arrive at the perfect solution by way of simulation, because our wish-list of what we want the robots to do is becoming increasingly complicated.
Robot trials
Simulation is not enough. In order to test the functionality of the robots, they need to undergo trials in the real world. The robots are produced as printouts from a 3D printer.
“Once the robots have been printed, their real-world functionalities quite often prove to be different from those of the simulated versions. We are talking of a reality gap. There will always be differences. Perhaps the floor is more slippery in reality, meaning that the friction coefficient will have to be changed. We are therefore studying how the robots deteriorate from simulation to laboratory stage,” says Mats Høvin.
The robots are frequently only half as good in real life.
“Practice enables the robots’ performance to be improved by 20 to 40 per cent. We hope that gradually, we will be able to double their performance ratings so that they end up being just as good as, or perhaps even better than their simulated counterparts.”
The researchers are looking at the robots’ ability to learn and practice even at the simulation program stage.
“We then proceed to check whether the robots are able to learn in a real-world setting. One of the tests is to see how the robots react to obstacles,” says Samuelsen.
From three to six legs
The robotics team are currently comparing the performance of five robots which in theory should be equally good.
Three of the five robots have four legs, one has three, another has six. The fewer legs, the less energy is consumed. One of the robots is fitted with single-joint legs. The others have legs with two joints.
“It may well be that the best solution would be to use three joints, but this would mean that the energy consumption would be far too high.”
Just like in the natural world, the researchers have therefore opted to restrict the number of joints to two.
“Single-jointed legs enable the robot to walk forward efficiently, but it will find it difficult to turn around,” Glette points out.
When the researchers are testing the robots, they set up an obstacle course to enable the robots to teach themselves how to pass the hurdles.
The researchers hope that in the future, the robots will be able to give automatic feedback to the simulation program about how well they work, so that the next time around, the computer will be in a position to design an even better robot.
“Once we have further perfected the robots, we will also be testing how they work if printed in a softer material.”
3D printers
3D printers make it possible to create sophisticated robots and other objects.
The Latest on: Self-learning robots
[google_news title=”” keyword=”Self-learning robots” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Self-learning robots
- Europe taps deep learning to make industrial robots safer colleagueson April 26, 2024 at 1:07 am
European researchers have launched the RoboSAPIENS project to make adaptive industrial robots more efficient and safer to work with humans.
- Box Office: The Lupita Nyong’o-Voiced ‘Wild Robot’ Makes Small Change to September Release Dateon April 24, 2024 at 7:22 pm
The DreamWorks Animation film is an adaptation of Peter Brown's literary sensation about a bot named Roz who is shipwrecked on an uninhabited island — at least by humankind.
- Whisker Litter-Robot 4 review: This $700 self-cleaning litter box outperformed every other box we testedon April 24, 2024 at 2:01 pm
The Whisker Litter-Robot 4 is a reliable self-cleaning litter box. We weighed its pros and cons against eight other automatic boxes before naming it the best.
- This robot can predict a smile before it happenson April 24, 2024 at 11:17 am
STORY: This AI-integrated robotic face can predict a smile before it happens.It's called Emo and it can anticipate and mimic human facial expressions.Engineers at Columbia University’s Creative ...
- Litter-Robot 4 Review: The Best Self-Cleaning Litter Box On The Marketon April 23, 2024 at 6:00 pm
From design specs to ease of use, here’s my full Litter-Robot 4 review—alongside some helpful feedback from my cats. There’s arguably no model on the market more coveted.
- I tested Roborock's most expensive robot vacuum and found 4 reasons to buy iton April 23, 2024 at 5:48 pm
The Roborock S8 MaxV Ultra brings all the suction power and smart features needed to keep your house clean, but it's not perfect.
- ‘I have arrived’: Israel unveils headless humanoid robot Menteeboton April 23, 2024 at 7:51 am
Israel’s Mentee Robotics has just unveiled its artificial intelligence (AI)-enabled household chore robot, Menteebot. After two years of research and development, the new robot certainly looks ...
- This Wi-Fi robot vacuum is discounted from $199 to $79on April 22, 2024 at 4:45 am
The iHome AutoVac Juno Robot Vacuum is an incredibly cheap robot vacuum which has many of the key benefits you need. It's on sale right now.
- The week's best robot vacuum deals: Catch the Roomba j7 at 50% offon April 19, 2024 at 2:00 am
Only three things are certain in life: Death, taxes, and a few days each month when you need to vacuum but just don't have time. Whether you detest the chore or hope to make your home upkeep a bit ...
- Shark Vs. Roomba: Which Robot Vacuum Offers A Superior Clean?on April 18, 2024 at 8:35 am
It can be difficult to get a handle on the Shark vs. Roomba debate without poring through the fine print. Here's what to know about how the two brands stack up.
via Bing News