Prototype boosts production of versatile fibers fourfold, while cutting energy consumption by 92 percent.
Nanofibers — polymer filaments only a couple of hundred nanometers in diameter — have a huge range of potential applications, from solar cells to water filtration to fuel cells. But so far, their high cost of manufacture has relegated them to just a few niche industries.
In the latest issue of the journal Nanotechnology, MIT researchers describe a new technique for producing nanofibers that increases the rate of production fourfold while reducing energy consumption by more than 90 percent, holding out the prospect of cheap, efficient nanofiber production.
“We have demonstrated a systematic way to produce nanofibers through electrospinning that surpasses the state of the art,” says Luis Fernando Velásquez-García, a principal research scientist in MIT’s Microsystems Technology Laboratories, who led the new work. “But the way that it’s done opens a very interesting possibility. Our group and many other groups are working to push 3-D printing further, to make it possible to print components that transduce, that actuate, that exchange energy between different domains, like solar to electrical or mechanical. We have something that naturally fits into that picture. We have an array of emitters that can be thought of as a dot-matrix printer, where you would be able to individually control each emitter to print deposits of nanofibers.”
Tangled tale
Nanofibers are useful for any application that benefits from a high ratio of surface area to volume — solar cells, for instance, which try to maximize exposure to sunlight, or fuel cell electrodes, which catalyze reactions at their surfaces. Nanofibers can also yield materials that are permeable only at very small scales, like water filters, or that are remarkably tough for their weight, like body armor.
The standard technique for manufacturing nanofibers is called electrospinning, and it comes in two varieties. In the first, a polymer solution is pumped through a small nozzle, and then a strong electric field stretches it out. The process is slow, however, and the number of nozzles per unit area is limited by the size of the pump hydraulics.
The other approach is to apply a voltage between a rotating drum covered by metal cones and a collector electrode. The cones are dipped in a polymer solution, and the electric field causes the solution to travel to the top of the cones, where it’s emitted toward the electrode as a fiber. That approach is erratic, however, and produces fibers of uneven lengths; it also requires voltages as high as 100,000 volts.
Thinking small
Velásquez-García and his co-authors — Philip Ponce de Leon, a former master’s student in mechanical engineering; Frances Hill, a former postdoc in Velásquez-García’s group who’s now at KLA-Tencor; and Eric Heubel, a current postdoc — adapt the second approach, but on a much smaller scale, using techniques common in the manufacture of microelectromechanical systems to produce dense arrays of tiny emitters. The emitters’ small size reduces the voltage necessary to drive them and allows more of them to be packed together, increasing production rate.
At the same time, a nubbly texture etched into the emitters’ sides regulates the rate at which fluid flows toward their tips, yielding uniform fibers even at high manufacturing rates. “We did all kinds of experiments, and all of them show that the emission is uniform,” Velásquez-García says.
To build their emitters, Velásquez-García and his colleagues use a technique called deep reactive-ion etching. On either face of a silicon wafer, they etch dense arrays of tiny rectangular columns — tens of micrometers across — which will regulate the flow of fluid up the sides of the emitters. Then they cut sawtooth patterns out of the wafer. The sawteeth are mounted vertically, and their bases are immersed in a solution of deionized water, ethanol, and a dissolved polymer.
When an electrode is mounted opposite the sawteeth and a voltage applied between them, the water-ethanol mixture streams upward, dragging chains of polymer with it. The water and ethanol quickly dissolve, leaving a tangle of polymer filaments opposite each emitter, on the electrode.
The researchers were able to pack 225 emitters, several millimeters long, on a square chip about 35 millimeters on a side. At the relatively low voltage of 8,000 volts, that device yielded four times as much fiber per unit area as the best commercial electrospinning devices.
Read more: Unlocking nanofibers’ potential
The Latest on: Nanofibers
[google_news title=”” keyword=”Nanofibers” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Nanofibers
- 3 Body Problem: Where the universe holds bareon April 26, 2024 at 10:00 pm
Netflix's adaptation of '3 Body Problem' turns Liu Cixin's science fiction trilogy into a visually stunning, intellectually provocative series that explores the limits of human knowledge and the compl ...
- Nanofibers Rid Water of Hazardous Dyeson April 25, 2024 at 1:46 am
Dyes, such as those used in the textile industry, are a major environmental problem. At TU Wien, efficient filters have now been developed – based on cellulose waste.
- Nanofibers rid water of hazardous dyes: Researchers develop efficient filters based on cellulose wasteon April 24, 2024 at 8:21 am
Using waste to purify water may sound counterintuitive. But at TU Wien, this is exactly what has now been achieved. Researchers have developed a special nanostructure to filter a widespread class of ...
- Lithium Silicon Battery Market Set to Skyrocket, Projected to Reach US$ 1150.0 Billion by 2034, with a CAGR of 48.4%on April 23, 2024 at 8:34 pm
The market is expected to reach a valuation of US$ 1150.0 billion by 2034. The lithium silicon battery market is rising due to the EV.
- Unconventional technology enhances composites important to automotive, aerospace and renewable energy industrieson April 23, 2024 at 1:08 pm
Scientists at the Department of Energy's Oak Ridge National Laboratory have developed a method that demonstrates how fiber-reinforced polymer composite materials used in the automotive, aerospace and ...
- Separating science fact from fiction in Netflix’s ‘3 Body Problem’on April 23, 2024 at 6:00 am
In 3 Body Problem, an alien race called the San-Ti inhabits a planet in a triple star system four light-years from Earth. The stars’ unpredictable orbits lead to “stable” and “chaotic” eras. Chaotic ...
- Carbonova Corp. Appoints Chris Cornille as Chief Commercial Officeron April 22, 2024 at 3:00 pm
Carbonova is excited to announce the appointment of Mr. Christopher Cornille as Chief Commercial Officer effective April 1, 2024. Chris is a senior executive with almost 40 years of experience in the ...
- Ocean environment safety of nanocellulose investigated in study of musselson April 17, 2024 at 12:45 pm
Cellulose nanofibers represent a promising resource for multiple industrial sectors, but what is their impact on the marine environment? A study published in Environmental Science: Nano recently ...
- Saudi Arabia Nanofibers Market Scope, Trends, Size, Share, Prominent Players and Forecast to 2024 to 2032on April 15, 2024 at 4:33 pm
Request To Download Free Sample of This Strategic Report @ The publisher has been closely monitoring the various markets in Saudi Arabia. This report provides a comprehensive analysis, detailing ...
- How ‘3 Body Problem’ Gets Lost in Translationon April 12, 2024 at 11:43 pm
The most notable exception may be Liu Cixin’s novel The Three-Body Problem, the sci-fi phenomenon whose 2014 English translation earned the Hugo Award and an endorsement from President Barack Obama.
via Bing News