The secrets to its success are lasers, magnets and a big pinch
The Z machine at Sandia National Laboratories in New Mexico discharges the most intense pulses of electrical current on Earth. Millions of amperes can be sent towards a metallic cylinder the size of a pencil eraser, inducing a magnetic field that creates a force — called a Z pinch — that crushes the cylinder in a fraction of a second.
Since 2012, scientists have used the Z pinch to implode cylinders filled with hydrogen isotopes in the hope of achieving the extreme temperatures and pressures needed for energy-generating nuclear fusion. Despite their efforts, they have never succeeded in reaching ignition — the point at which the energy gained from fusion is greater than the energy put in.
But after tacking on two more components, physicists think they are at last on the right path. Researchers working on Sandia’s Magnetized Liner Inertial Fusion (MagLIF) experiment added a secondary magnetic field to thermally insulate the hydrogen fuel, and a laser to preheat it (see ‘Feeling the pinch’). In late November, they tested the system for the first time, using 16 million amperes of current, a 10-tesla magnetic field and 2 kilojoules of energy from a green laser.
“We were excited by the results,” says Mark Herrmann, director of the Z machine and the pulsed-power science center at Sandia. “We look at it as confirmation that it is working like we think it should.”
The experiment yielded about 1010 high-energy neutrons, a measure of the number of fusion reactions achieved. This is a record for MagLIF, although it still falls well short of ignition. Nevertheless, the test demonstrates the appeal of such pulsed-power approaches to fusion. “A substantial gain is more likely to be achieved at an early date with pulsed power,” says nuclear physicist David Hammer of Cornell University in Ithaca, New York, who co-wrote a 2013 US National Research Council assessment of approaches to fusion energy.
With its relatively slim US$5-million annual budget, MagLIF is a David next to two fusion Goliaths: the $3.5-billion National Ignition Facility (NIF) at Lawrence Livermore National Laboratory in California, and the €15-billion (US$20-billion) ITER experiment under construction in France. (Sandia has about $80 million to operate the Z machine each year, but it serves other experiments in addition to MagLIF.) The NIF squashes fuel capsules using nearly 2 megajoules of laser energy, and ITER will use 10,000 tons of superconducting magnets in a doughnut-shaped ‘tokamak’ to hold a plasma in place to coax self-sustaining fusion.
Both of the big projects have run into problems.
The Latest on: Nuclear Fusion
[google_news title=”” keyword=”Nuclear Fusion” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Nuclear Fusion
- US and Japan team up to further development of nuclear fusion: 'Fusion is too important for needless competition'on April 27, 2024 at 3:30 am
"We are further leading the way in developing and deploying next generation clean energy technology." US and Japan team up to further development of nuclear fusion: 'Fusion is too important for ...
- Nuclear fusion experiment overcomes two key operating hurdleson April 25, 2024 at 9:43 am
Two important barriers to a stable, powerful fusion reaction have been leapt by an experiment in a small tokamak reactor, but we don’t yet know if the technique will work in larger devices ...
- Nuclear fusion breakthrough overcomes key barrier to limitless clean energyon April 25, 2024 at 5:48 am
Two of the key barriers to producing power from nuclear fusion have been overcome, in what scientists say is a major advance towards producing near-limitless clean energy. A team at US energy firm ...
- US startup’s fusion energy device reaches 37-million-degree temperatureon April 23, 2024 at 8:05 am
The fusion of the atoms gives out 10 million times more energy per ounce than burning the same amount of coal.
- Nuclear fusion scientists hail 'low-cost' 37 million °C breakthroughon April 23, 2024 at 8:00 am
A nuclear fusion start-up says it has hit temperatures of 37 million °C at a “fraction of the complexity and cost” of its rivals. Scientists at Zap Energy say they have “joined the rarefied ranks” to ...
- Tom Still: Fusion energy is a nascent ‘hot spot’ for Wisconsin economy’on April 22, 2024 at 5:35 am
Wisconsin has a competitive advantage in fusion research, with the University of Wisconsin-Madison's Fusio Institute producing 167 Ph.D. graduates in fusion engineering. Private investment in the ...
- MUSE Nuclear Fusion Stellerator Made with Off the Shelf Parts and 3D Printed Shellon April 22, 2024 at 2:16 am
The Princeton Physics Lab has built a Stellarator nuclear fusion reactor prototype using permanent magnets. This is a scientific first that enables mostly off the shelf magnet for simple and low cost ...
- Nuclear fusion reactor in South Korea runs at 100 million degrees C for a record-breaking 48 secondson April 14, 2024 at 7:58 am
The experimental fusion reactor sustained temperatures of 180 million degrees Fahrenheit for a record-breaking 48 seconds.
- Why are Bill Gates, Jeff Bezos, bullish on developing nuclear fusion as a power source?on April 13, 2024 at 11:46 am
While nuclear fission is commonly used in nuclear power plants across the globe, nuclear fusion is a lesser-known process.
- Proxima Fusion raises $21M to build on its ‘stellarator’ approach to nuclear fusionon April 9, 2024 at 4:01 pm
For instance, the Fusion Industry Association found that while nuclear fusion companies had attracted over $6 billion in investment in 2023, $1.4 billion more than in 2022, the 27% growth proved ...
via Bing News