A team headed by Prof. Silke Christiansen has developed a transparent electrode with high electrical conductivity for solar cells and other optoelectronic components – that uses minimal amounts of material. It consists of a random network of silver nanowires that is coated with aluminium-doped zinc oxide.
The novel electrode requires about 70 times less silver than conventional silver grid electrodes, but possesses comparable electrical conductivity.
The electrodes for connections on the “sunny side” of a solar cell need to be not just electrically conductive, but transparent as well. As a result, electrodes are currently made either by using thin strips of silver in the form of a coarse-meshed grid squeegeed onto a surface, or by applying a transparent layer of electrically conductive indium tin oxide (ITO) compound. Neither of these are ideal solutions, however. This is because silver is a precious metal and relatively expensive, and silver particles with nanoscale dimensions oxidise particularly rapidly; meanwhile, indium is one of the rarest elements on earth crust and probably will only continue to be available for a few more years.
Mesh of silver nanowires
Manuela Göbelt on the team of Prof. Silke Christiansen has now developed an elegant new solution using only a fraction of the silver and entirely devoid of indium to produce a technologically intriguing electrode. The doctoral student initially made a suspension of silver nanowires in ethanol using wet-chemistry techniques. She then transferred this suspension with a pipette onto a substrate, in this case a silicon solar cell. As the solvent is evaporated, the silver nanowires organise themselves into a loose mesh that remains transparent, yet dense enough to form uninterrupted current paths.
Encapsulation by AZO crystals
Subsequently, Göbelt used an atomic layer deposition technique to gradually apply a coating of a highly doped wide bandgap semiconductor known as AZO. AZO consists of zinc oxide that is doped with aluminium. It is much less expensive than ITO and just as transparent, but not quite as electrically conductive. This process caused tiny AZO crystals to form on the silver nanowires, enveloped them completely, and finally filled in the interstices. The silver nanowires, measuring about 120 nanometres in diameter, were covered with a layer of about 100 nanometres of AZO and encapsulated by this process.
Quality map calculated
Measurements of the electrical conductivity showed that the newly developed composite electrode is comparable to a conventional silver grid electrode. However, its performance depends on how well the nanowires are interconnected, which is a function of the wire lengths and the concentration of silver nanowires in the suspension. The scientists were able to specify the degree of networking in advance with computers. Using specially developed image analysis algorithms, they could evaluate images taken with a scanning electron microscope and predict the electrical conductivity of the electrodes from them.
“We are investigating where a given continuous conductive path of nanowires is interrupted to see where the network is not yet optimum”, explains Ralf Keding. Even with high-performance computers, it still initially took nearly five days to calculate a good “quality map” of the electrode. The software is now being optimised to reduce the computation time. “The image analysis has given us valuable clues about where we need to concentrate our efforts to increase the performance of the electrode, such as increased networking to improve areas of poor coverage by changing the wire lengths or the wire concentration in solution”, says Göbelt.
Practical aternative to conventional electrodes
“We have developed a practical, cost-effective alternative to conventional screen-printed grid electrodes and to the common ITO type that is threatened however by material bottlenecks”, says Christiansen, who heads the Institute of Nanoarchitectures for Energy Conversion at HZB and additionally directs a project team at the Max Planck Institute for the Science of Light (MPL).
Only a fraction of silver, nearly no shadow effects
The new electrodes can actually be made using only 0.3 grams of silver per square metre, while conventional silver grid electrodes require closer to between 15 and 20 grams of silver. In addition, the new electrode casts a considerably smaller shadow on the solar cell. “The network of silver nanowires is so fine that almost no light for solar energy conversion is lost in the cell due to the shadow”, explains Göbelt. On the contrary, she hopes “it might even be possible for the silver nanowires to scatter light into the solar cell absorbers in a controlled fashion through what are known as plasmonic effects.”
The Latest on: Transparent Electronics
[google_news title=”” keyword=”Transparent Electronics” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Transparent Electronics
- Sonos' new S2 app simplifies audio control, but there's a catch - or twoon May 8, 2024 at 6:16 am
The audio giant's web-based platform unifies user experience across all devices, but what about hardware compatibility and future upgrades?
- Swedish startup wins EU funding to print organic indoor solar panelson May 7, 2024 at 7:55 am
Epishine's organic solar panels harness indoor light to power electronics and Internet of Things (IoT) devices.
- transparent oledon May 5, 2024 at 5:00 pm
(Whenever we can have one of those again, anyway.) The key to this project is a pair of transparent CrystalFonts OLED displays, just like the ones [Sean Hodgins] recently used to produce his ...
- Nanostructured copper surface shows potential for transparent, antimicrobial surfaces in touch displayson May 3, 2024 at 8:25 am
The interest in antimicrobial solutions for personal and multi-user touch screens, such as tablets and mobile devices, has grown in recent years. Traditional methods like sprayable alcohols or wipes ...
- Tech Start-Up TAZAAR Prepares For EU’s New Digital Product Passportson May 3, 2024 at 2:59 am
Few people outside the electronics industry will be aware of the EU’s new Digital Product Passport regulations. Startup TAZAAR wants to make it easier for manufacturers.
- Tiny, transparent chip could transform your smartphone into a professional-grade cameraon May 2, 2024 at 12:10 pm
Scientists built a "smart filter" that can work with a cheap smartphone camera to transform low-resolution photos into supersharp images without glare and other issues.
- First in-plane automotive HUD with multiple transparent displayson April 26, 2024 at 5:55 am
Transparent display startup Ceres Holographics has demonstrated what it claims is the first in-plane heads-up display (HUD) with multiple, separate transparent displays in one automotive windshield.
- Scientists stencil-paint carbon nanotube components for flexible transparent electronicson April 23, 2024 at 9:49 am
The resulting films turned out to have superior properties for manufacturing components for 6G communication devices and flexible and transparent electronics—such as wearable health trackers.
via Bing News