Illustration of a carbon capture process designed by UIC College of Engineering scientists. Carbon dioxide from air or flue gas is absorbed by a dry organic solution to form bicarbonate ions, which migrate across a membrane and are dissolved in a liquid solution to concentrated CO2. Carbon atoms are shown in red, oxygen atoms are shown in blue and hydrogen atoms are shown in white. (Credit: Aditya Prajapati/UIC)
Engineers at the University of Illinois Chicago have built a cost-effective artificial leaf that can capture carbon dioxide at rates 100 times better than current systems.
Unlike other carbon capture systems, which work in labs with pure carbon dioxide from pressurized tanks, this artificial leaf works in the real world. It captures carbon dioxide from more diluted sources, like air and flue gas produced by coal-fired power plants, and releases it for use as fuel and other materials.
“Our artificial leaf system can be deployed outside the lab, where it has the potential to play a significant role in reducing greenhouse gases in the atmosphere thanks to its high rate of carbon capture, relatively low cost and moderate energy, even when compared to the best lab-based systems,” said Meenesh Singh, assistant professor of chemical engineering in the UIC College of Engineering and corresponding author on the paper.
Using a?previously reported theoretical concept, the scientists modified a standard artificial leaf system with inexpensive materials to include a water gradient — a dry side and a wet side — across an electrically charged membrane.
On the dry side, an organic solvent attaches to available carbon dioxide to produce a concentration of bicarbonate, or baking soda, on the membrane. As bicarbonate builds, these negatively charged ions are pulled across the membrane toward a positively charged electrode in a water-based solution on the membrane’s wet side. The liquid solution dissolves the bicarbonate back into carbon dioxide, so it can be released and harnessed for fuel or other uses.
The electrical charge is used to speed up the transfer of bicarbonate across the membrane.
When they tested the system, which is small enough to fit in a backpack, the UIC scientists found that it had a very high flux — a rate of carbon capture compared with the surface area required for the reactions — of 3.3 millimoles per hour per 4 square centimeters. This is more than 100 times better than other systems, even though only a moderate amount of electricity (0.4 KJ/hour) was needed to power the reaction, less than the amount of energy needed for a 1 watt LED lightbulb. They calculated the cost at $145 per ton of carbon dioxide, which is in line with recommendations from the Department of Energy that cost should not exceed around $200 per ton.
“It’s particularly exciting that this real-world application of an electrodialysis-driven artificial leaf had a high flux with a small, modular surface area,” Singh said. “This means that it has the potential to be stackable, the modules can be added or subtracted to more perfectly fit the need and affordably used in homes and classrooms, not just among profitable industrial organizations. A small module of the size of a home humidifier can remove greater than 1 kilogram of CO2 per day, and four industrial electrodialysis stacks can capture greater than 300 kilograms of CO2 per hour from flue gas.”
Original Article: Stackable artificial leaf uses less power than lightbulb to capture 100 times more carbon than other systems
More from: University of Illinois at Chicago | Argonne National Laboratory | Oklahoma State University
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Artificial leaf
- Here’s What’s Worth Seeing at Frieze New York
The East Asian art of paper cutting, drawings inspired by Brazilian woodworking, and cunty ceramics are among the standouts of a mostly uninspiring affair.
- Toward artificial leaves that float on water, bubbling fuel
Researchers have now made such an artificial leaf device using an organic photovoltaic (OPV) material. Depending on the catalyst used, the device either splits water to make hydrogen fuel or splits ...
- NYC’s most outspoken smokers’ rights activist keeps up fight by growing her own tobacco — and ignoring bans
She’s fired up — and still firing ’em up. The city’s most outspoken smoker’s rights activist has turned to “civil disobedience” now that cigarette restrictions are the norm – puffing ...
- Scientists develop new "artificial leaf"
Chinese scientists, along with their international counterparts, have developed a brand-new type of artificial leaf, a liquid metal-embraced photoactive film. It harnesses solar energy to produce ...
- Artificial leaves can now directly make liquid fuels
The device, presented in the journal Nature Energy, is the latest evolution of an artificial leaf. Researchers have been working for years on such systems that mimic photosynthesis to sustainably ...
Go deeper with Google Headlines on:
Artificial leaf
[google_news title=”” keyword=”artificial leaf” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Electrodialysis-driven artificial leaf
- Feed has no items.
Go deeper with Google Headlines on:
Electrodialysis-driven artificial leaf
[google_news title=”” keyword=”electrodialysis-driven artificial leaf ” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]