The process can handle nearly any type of biomass
Although low temperature fuel cells powered by methanol or hydrogen have been well studied, existing low temperature fuel cell technologies cannot directly use biomass as a fuel because of the lack of an effective catalyst system for polymeric materials.
Now, researchers at the Georgia Institute of Technology have developed a new type of low-temperature fuel cell that directly converts biomass to electricity with assistance from a catalyst activated by solar or thermal energy. The hybrid fuel cell can use a wide variety of biomass sources, including starch, cellulose, lignin – and even switchgrass, powdered wood, algae and waste from poultry processing.
The device could be used in small-scale units to provide electricity for developing nations, as well as for larger facilities to provide power where significant quantities of biomass are available.
“We have developed a new method that can handle the biomass at room temperature, and the type of biomass that can be used is not restricted – the process can handle nearly any type of biomass,” said Yulin Deng, a professor in Georgia Tech’s School of Chemical and Biomolecular Engineering and the Institute of Paper Science and Technology (IPST). “This is a very generic approach to utilizing many kinds of biomass and organic waste to produce electrical power without the need for purification of the starting materials.”
The new solar-induced direct biomass-to-electricity hybrid fuel cell was described February 7, 2014, in the journal Nature Communications.
The challenge for biomass fuel cells is that the carbon-carbon bonds of the biomass – a natural polymer – cannot be easily broken down by conventional catalysts, including expensive precious metals, Deng noted. To overcome that challenge, scientists have developed microbial fuel cells in which microbes or enzymes break down the biomass. But that process has many drawbacks: power output from such cells is limited, microbes or enzymes can only selectively break down certain types of biomass, and the microbial system can be deactivated by many factors.
Deng and his research team got around those challenges by altering the chemistry to allow an outside energy source to activate the fuel cell’s oxidation-reduction reaction.
In the new system, the biomass is ground up and mixed with a polyoxometalate (POM) catalyst in solution and then exposed to light from the sun – or heat. A photochemical and thermochemical catalyst, POM functions as both an oxidation agent and a charge carrier. POM oxidizes the biomass under photo or thermal irradiation, and delivers the charges from the biomass to the fuel cell’s anode. The electrons are then transported to the cathode, where they are finally oxidized by oxygen through an external circuit to produce electricity.
“If you mix the biomass and catalyst at room temperature, they will not react,” said Deng. “But when you expose them to light or heat, the reaction begins. The POM introduces an intermediate step because biomass cannot be directly accessed by oxygen.”
The system provides major advantages, including combining the photochemical and solar-thermal biomass degradation in a single chemical process, leading to high solar conversion and effective biomass degradation. It also does not use expensive noble metals as anode catalysts because the fuel oxidation reactions are catalyzed by the POM in solution. Finally, because the POM is chemically stable, the hybrid fuel cell can use unpurified polymeric biomass without concern for poisoning noble metal anodes.
The system can use soluble biomass, or organic materials suspended in a liquid. In experiments, the fuel cell operated for as long as 20 hours, indicating that the POM catalyst can be re-used without further treatment.
In their paper, the researchers reported a maximum power density of 0.72 milliwatts per square centimeter, which is nearly 100 times higher than cellulose-based microbial fuel cells, and near that of the best microbial fuel cells. Deng believes the output can be increased five to ten times when the process is optimized.
“I believe this type of fuel cell could have an energy output similar to that of methanol fuel cells in the future,” he said. “To optimize the system, we need to have a better understanding of the chemical processes involved and how to improve them.”
The researchers also need to compare operation of the system with solar energy and other forms of input energy, such as waste heat from other processes. Beyond the ability to directly use biomass as a fuel, the new cell also offers advantages in sustainability – and potentially lower cost compared to other fuel cell types.
“We can use sustainable materials without any chemical pollution,” Deng said. “Solar energy and biomass are two important sustainable energy sources available to the world today. Our system would use them together to produce electricity while reducing dependence on fossil fuels.”
The Latest on: Hybrid Fuel Cell
[google_news title=”” keyword=”Hybrid Fuel Cell” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Hybrid Fuel Cell
- Wireless Trains and Fuel Economy - IDTechEx Explores the Potential Behind Electric and Zero-Emission Trainson April 26, 2024 at 5:47 am
Trains that could travel to more tucked-away parts of the country with zero emissions are an example of the potential behind battery electric (BEV) and fuel cell (FC) trains. The benefits to the ...
- GILLIG to develop hydrogen fuel cell powered buson April 25, 2024 at 9:05 am
GILLIG is collaborating with BAE Systems and Ballard Power Systems on the development of the hydrogen fuel cell bus.
- BAE Systems, Cummins partner on hybrid drivetrain for buseson April 25, 2024 at 8:56 am
The companies are targeting to launch the new B hybrid-compatible diesel engine and hybrid electric drivetrain in 2027.
- BAE Systems, Cummins to Collaborate on Hybrid Drivetrain for Transit Buseson April 24, 2024 at 1:04 pm
BAE Systems and Cummins Inc. plan to collaborate on the integration and certification of a B hybrid-compatible diesel engine and hybrid electric ...
- What are fuel cell EVs?on April 24, 2024 at 4:00 am
Fuel cell EVs run on hydrogen gas, which mixes with oxygen in a chemical reaction to create electricity. The hydrogen is stored in a tank on board the vehicle.
- Low-speed acoustic alerts mandated for new electric, hybrid vehicles in Australiaon April 22, 2024 at 10:41 pm
The Federal Government will require new electric and hybrid vehicles to produce audible safety alerts when travelling at low speeds from November 2025 ...
- 7 EVs and Hybrid Cars That No Longer Qualify for a Tax Credit in 2024on April 22, 2024 at 9:23 am
Rules concerning federal tax credits for electric vehicles (EVs) are intended to provide an incentive for manufacturers to strengthen America's supply chains by building and sourcing materials ...
- Feadship’s First Full Hybrid Electric Project 1012 Takes To The Seaon April 19, 2024 at 1:12 pm
Feadship Project 1012 headed out of the shed at Makkum for sea trials in anticipation a July delivery to its Spanish owner, a repeat Feadship customer.
- IHI selected for further hydrogen fuel cell and aircraft electrification researchon April 19, 2024 at 12:38 am
Hydrogen fuel cell and aircraft electrification technologies developed by Japan's IHI will be further refined through projects initiated by the country's New Energy and Industrial Development ...
- Hybrid vehicles overtake battery EVs in Australia in 1Q24on April 16, 2024 at 3:20 pm
The take-up of electric vehicles in Australia is proceeding apace, with hybrids gaining the edge as the market share of vehicles running internal combustion engines continues to fall, the Australian ...
via Bing News