Removing tumors from within the inner ear is a very delicate matter that typically requires surgeons to remove the entire mastoid bone. However, in the future, all doctors will need to do is cut a tunnel of 5 mm in diameter through the bone using a miniature robot named NiLiBoRo.
The system is capable of adjusting its path while drilling through bone to steer around sensitive tissue such as blood vessels and nerves. Researchers will be displaying the new technology at the Compamed exhibition from November 16-19 in Düsseldorf (Hall 08a, Booth K38).
Surgery is unavoidable for treating inner ear tumors, but the inner ear is difficult to access. This is because it is covered by a cranial bone known as the mastoid, or petrosal bone. What’s more, the surrounding tissue contains lots of nerves and blood vessels. For this reason the surgeons will cut out as much of the mastoid bone as needed until they have located each one of these sensitive structures. Only then can they be sure not to damage them. What this entails most of the time is the removal of the entire bone. The hole thus created is filled in with fatty tissue taken from the abdomen after the completion of the procedure.
Performing surgery through a 5 mm wide tunnel
In the future this operation will be performed in a less invasive fashion, requiring just a small hole measuring 5 mm in diameter through which the tumor can be resected from the inner ear. The technology that makes this possible goes by the name of NiLiBoRo, a German acronym which stands for “Non-linear Drilling Robot”. The system is being developed by researchers in the Mannheim Project Group for Automation in Medicine and Biotechnology, part of the Fraunhofer Institute for Production Technology and Automation IPA, in cooperation with the Technical University of Darmstadt, the University of Aachen, and the Düsseldorf University Clinic. Drilling machines capable of boring a tunnel through bone already exist, but they can do so only in a straight line. “NiLiBoRo is the first one that can drill around corners as well,” says project group scientist Lennart Karstensen. It is this particular characteristic that makes it possible to perform minimally invasive surgery on inner ear tumors. If the tunnel were to run in a straight line, it would at times come troublingly close to hitting nerves. To avoid injuring nerve tissue, the tunnel would have to be no more than 1 to 2 mm in diameter. However, it is impossible to perform surgery through such a small opening. The NiLiBoRo on the other hand is capable of steering around sensitive areas. This makes it possible to achieve a tunnel diameter of 5 m, which is wide enough to perform the operation.
Hydraulic lines allow the robot worm to crawl forward
So how does this “worm” manage to drill around curves and corners through the mastoid bone? “The worm consists of a ‘head’ and a ‘tail’ section,” explains Karstensen. “Both of these parts are connected with one another by means of a flexible bellows mechanism.” The design is reminiscent of an articulated public transit bus in which the front and rear sections are coupled by means of a hose-like center section that looks like an accordion.
As it travels through the bone, the robot is connected to the “outside world” – in other words the control units and pumps in the operation room – by means of 8 to 12 hydraulic lines. It is these lines that allow the robot to crawl forward in the right direction. This is done by first pumping hydraulic fluid into three bladders found in the rear section of the robot. The bladders fill in the empty space between the worm and the bone and thereby fix the rear section of the robot in place. The hydraulic fluid then travels into the bellows. This causes the “accordion” to expand, which pushes the head forward. The worm stretches, so to speak, and presses its front section further into the bone. The drill attached to the head bores deeper inward. Now the rear section retracts towards the head in a motion similar to that of a real worm. To do so, the bladders in the front section are pumped full of fluid to hold the front in place while the fluid in the rear bladders is evacuated. At this point the fluid is also being sucked out of the bellows through the hydraulic lines. The robot contracts, which pulls the rear section up behind the front. In this way the NiLiBoRo makes its way forward bit by bit. “We can alter the robot’s direction of travel by adjusting the bladders in the front section. For instance, if we wanted to move left then we fill the left bladder with less fluid than the right, which will cause the robot to veer to the left,” says Karstensen.
In the laboratory, and later in the operation room, the path the NiLiBoRo takes as it drills its way forward is precisely monitored by an electromagnetic tracking system, or EMT for short. Designed by partners at the Technical University of Darmstadt, this system works by sporadically capturing images of the robot using computer tomography in order to monitor its position.
Read more: Robotic worm for head surgery can cut around corners
The Latest on: Robotic Surgery
[google_news title=”” keyword=”Robotic Surgery” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Robotic Surgery
- MEC visits hospitals to gauge success of robotic surgeryon May 4, 2024 at 2:55 am
MEC for Health Wellness MEC Nomafrench Mbombo joined clinicians and staff from Tygerberg and Groote Schuur hospitals to receive an update on the progress of the Da Vinci robotic surgery programmes.
- Technology never before seen in Iowa! Veranda Dentistry provides robotic-assisted dental implants | Paid Contenton May 3, 2024 at 11:35 am
Veranda Dentistry's Yomi assists doctors with dental procedures, helping improve outcomes for all patients | Paid Content ...
- Surgeons perform first-ever dual robotic surgery on patient with lymphedema after breast surgeryon May 2, 2024 at 1:55 pm
UZ Brussel is the first hospital worldwide to perform dual-robot assisted lymphedema surgery. The main advantage of this approach is that it is much less invasive for the patient, resulting in less ...
- CMR leaders on the ‘massive advantage’ of Versius and growing robotic surgery penetrationon May 2, 2024 at 10:58 am
CMR Surgical leaders say it'll take the right surgical robot to expand global adoption — and that their Versius system is just the thing.
- Student Work on Robotic Surgical Instrument Honored at International Conferenceon May 2, 2024 at 8:01 am
Major Qualifying Project team’s work on design and kinematic evaluation wins Best Paper Award at symposium in Japan ...
- Future Market Insights Predicts Growth in Global Lung Cancer Surgery Market to Reach US$ 1.98 Billion by 2029on May 1, 2024 at 7:42 pm
Future Market Insights (FMI), a leading provider of market research, analysis, and intelligence, has released a comprehensive report forecasting significant growth in the global lung cancer surgery ...
- Local robotic surgeon hits major milestone of 1,500 caseson April 28, 2024 at 2:02 am
They decided to move things up a decade or so, and searched for a position — where he could again do robotic surgery — in the Commonwealth. He and his wife picked Spotsylvania Regional Medical Center, ...
- ‘Sciatica was gone’: hospital performs robot-assisted spinal surgery in Canadian firston April 26, 2024 at 6:08 am
London Health Sciences Centre was home to the first ever robot-assisted direct lateral spinal surgery in Canada. Dave Meyn said when he woke up from surgery, the sciatic was gone.
- Hartford HealthCare unveils latest in robotic innovation for prostate cancer careon April 24, 2024 at 10:10 am
For the last two decades, robotic surgery has been a game changer for the treatment of prostate cancer. Hartford HealthCare’s Tallwood Urology & Kidney Institute is now bringing the latest in robotic ...
- We are leading experts in robotic surgeryon April 23, 2024 at 6:21 am
Robotic surgery delivers a faster recovery, especially when time is of the essence. When Ginny Ross was diagnosed with uterine cancer, she chose to have a total hysterectomy with Dr. Bradley Corr, an ...
via Bing News