This has great implications for improvements in solar cell efficiency
Latest research finds that the trailblazing ‘perovskite’ material used in solar cells can double up as a laser, strongly suggesting the astonishing efficiency levels already achieved in these cells is only part of the journey.
Commercial silicon-based solar cells – such as those seen on the roofs of houses across the country – operate at about 20% efficiency for converting the Sun’s rays into electrical energy. It’s taken over 20 years to achieve that rate of efficiency.
A relatively new type of solar cell based on a perovskite material – named for scientist Lev Perovski, who first discovered materials with this structure in the Ural Mountains in the 19th century – was recently pioneered by an Oxford research team led by Professor Henry Snaith.
Perovskite solar cells, the source of huge excitement in the research community, already lie just a fraction behind commercial silicon, having reached a remarkable 17% efficiency after a mere two years of research – transforming prospects for cheap large-area solar energy generation.
Now, researchers from Professor Sir Richard Friend’s group at Cambridge’s Cavendish Laboratory – working with Snaith’s Oxford group – have demonstrated that perovskite cells excel not just at absorbing light but also at emitting it. The new findings, recently published online in the Journal of Physical Chemistry Letters, show that these ‘wonder cells’ can also produce cheap lasers.
By sandwiching a thin layer of the lead halide perovskite between two mirrors, the team produced an optically driven laser which proves these cells “show very efficient luminescence” – with up to 70% of absorbed light re-emitted.
The researchers point to the fundamental relationship, first established by Shockley and Queisser in 1961, between the generation of electrical charges following light absorption and the process of ‘recombination’ of these charges to emit light.
Essentially, if a material is good at converting light to electricity, then it will be good at converting electricity to light. The lasing properties in these materials raise expectations for even higher solar cell efficiencies, say the Oxbridge team, which – given that perovskite cells are about to overtake commercial cells in terms of efficiency after just two years of development – is a thrilling prospect.
“This first demonstration of lasing in these cheap solution-processed semiconductors opens up a range of new applications,” said lead author Dr Felix Deschler of the Cavendish Laboratory. “Our findings demonstrate potential uses for this material in telecommunications and for light emitting devices.”
Most commercial solar cell materials need expensive processing to achieve a very low level of impurities before they show good luminescence and performance. Surprisingly these new materials work well even when very simply prepared as thin films using cheap scalable solution processing.
The researchers found that upon light absorption in the perovskite two charges (electron and hole) are formed very quickly – within 1 picosecond – but then take anywhere up to a few microseconds to recombine. This is long enough for chemical defects to have ceased the light emission in most other semiconductors, such as silicon or gallium arsenide. “These long carrier lifetimes together with exceptionally high luminescence are unprecedented in such simply prepared inorganic semiconductors,” said Dr Sam Stranks, co-author from the Oxford University team.
“We were surprised to find such high luminescence efficiency in such easily prepared materials. This has great implications for improvements in solar cell efficiency,” said Michael Price, co-author from the group in Cambridge.
The Latest on: Perovskite solar cells
[google_news title=”” keyword=”Perovskite solar cells” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Perovskite solar cells
- Light, flexible, efficient: Perovskite-based tandem solar cellson May 2, 2024 at 2:15 am
Dübendorf, St. Gallen und Thun, 02.05.2024 - All-perovskite tandem solar cells could soon pick up where silicon solar cells reach their limits. These highly efficient, lightweight and flexible cells ...
- Perovskite-based tandem solar cellson May 1, 2024 at 5:00 pm
The group leader in the Laboratory for Thin Films and Photovoltaics is researching highly efficient solar cells made of perovskite. A single perovskite cell alone does not achieve a higher efficiency, ...
- NREL outlines way forward for tandem cellson May 1, 2024 at 7:15 am
The vast majority of solar modules in use today rely on a single junction, which is able to absorb only a fraction of the solar spectrum and thus are limited to how efficient they can be. Tandem solar ...
- Is perovskite PV still the future of solar?on May 1, 2024 at 3:01 am
So, is perovskite PV still the future of solar? It seems likely to have place among the solutions, at the very least. Applications will get more energy efficient. The need to efficient solar is ...
- Tin halide perovskite solar cell based on new precursor additive achieves 12.22% efficiencyon April 30, 2024 at 5:00 pm
A group of researchers led by the Chungbuk National University in South Korea has designed a tin halide perovskite (Sn-HP) solar cell that utilizes an additive known as 4-Phenylthiosemicarbazide ...
- A strategy to boost the efficiency of perovskite/organic photovoltaic cellson April 29, 2024 at 5:32 am
While perovskite/organic tandem solar cells could theoretically achieve high PCEs and stabilities, their performance is hindered by a process known as phase segregation. This process degrades the ...
- Researchers crack code for more efficient perovskite solar cellson April 28, 2024 at 11:09 am
Perovskite solar cells utilize perovskite materials, known for their light-harvesting properties. Organic solar cells, on the other hand, are lightweight and flexible. Perovskite/organic tandem cells ...
- A strategy to boost the efficiency of perovskite/organic solar cellson April 28, 2024 at 6:00 am
Organic solar cells based on perovskite materials have been found to exhibit various advantages over conventional solar cell designs based on conventional silicon, including lower costs of fabrication ...
- Ultra-thin, flexible solar cells demonstrate their promise in a commercial quadcopter droneon April 24, 2024 at 9:27 am
Whether on Earth or in space, autonomous energy is critical in order to keep power systems running independently for extended periods of time, particularly in remote or unpredictable environments.
- Perovskite cells power palm-sized droneon April 24, 2024 at 4:19 am
Researchers at the Johannes Kepler University in Linz and the Linz Institute for Organic Solar Cells in Austria have developed ultra-lightweight quasi-2D perovskite solar cells with a power output of ...
via Bing News