An LED light is powered by a prototype rechargeable battery using the
sodium-chlorine chemistry developed recently by Stanford researchers.
An international team of researchers led by Stanford University has developed rechargeable batteries that can store up to six times more charge than ones that are currently commercially available.
The advance, detailed in a new paper published Aug. 25 in the journal Nature, could accelerate the use of rechargeable batteries and puts battery researchers one step closer toward achieving two top stated goals of their field: creating a high-performance rechargeable battery that could enable cellphones to be charged only once a week instead of daily and electric vehicles that can travel six times farther without a recharge.
The new so-called alkali metal-chlorine batteries, developed by a team of researchers led by Stanford chemistry Professor Hongjie Dai and doctoral candidate Guanzhou Zhu, relies on the back-and-forth chemical conversion of sodium chloride (Na/Cl2) or lithium chloride (Li/Cl2) to chlorine.
When electrons travel from one side of a rechargeable battery to the other, recharging reverts the chemistry back to its original state to await another use. Non-rechargeable batteries have no such luck. Once drained, their chemistry cannot be restored.
“A rechargeable battery is a bit like a rocking chair. It tips in one direction, but then rocks back when you add electricity,” Dai explained. “What we have here is a high-rocking rocking chair.”
Serendipitous discovery
The reason no one had yet created a high-performance rechargeable sodium-chlorine or lithium-chlorine battery is that chlorine is too reactive and challenging to convert back to a chloride with high efficiency. In the few cases where others were able to achieve a certain degree of rechargeability, the battery performance proved poor.
In fact, Dai and Zhu did not set out to create a rechargeable sodium and lithium-chlorine battery at all, but merely to improve their existing battery technologies using thionyl chloride. This chemical is one of the main ingredients of lithium-thionyl chloride batteries, which are a popular type of single-use battery first invented in the 1970s.
But in one of their early experiments involving chlorine and sodium chloride, the Stanford researchers noticed that the conversion of one chemical to another had somehow stabilized, resulting in some rechargeability. “I didn’t think it was possible,” Dai said. “It took us about at least a year to really realize what was going on.”
Over the next several years, the team elucidated the reversible chemistries and sought ways to make it more efficient by experimenting with many different materials for the battery’s positive electrode. The big breakthrough came when they formed the electrode using an advanced porous carbon material from collaborators Professor Yuan-Yao Li and his student Hung-Chun Tai from the National Chung Cheng University of Taiwan. The carbon material has a nanosphere structure filled with many ultra-tiny pores. In practice, these hollow spheres act like a sponge, sopping up copious amounts of otherwise touchy chlorine molecules and storing them for later conversion to salt inside the micropores.
“The chlorine molecule is being trapped and protected in the tiny pores of the carbon nanospheres when the battery is charged,” Zhu explained. “Then, when the battery needs to be drained or discharged, we can discharge the battery and convert chlorine to make NaCl – table salt – and repeat this process over many cycles. We can cycle up to 200 times currently and there’s still room for improvement.”
The result is a step toward the brass ring of battery design – high energy density. The researchers have so far achieved 1,200 milliamp hours per gram of positive electrode material, while the capacity of commercial lithium-ion battery today is up to 200 milliamp hours per gram. “Ours has at least six times higher capacity,” Zhu said.
The researchers envision their batteries one day being used in situations where frequent recharging is not practical or desirable, such as in satellites or remote sensors. Many otherwise usable satellites are now floating in orbit, obsolete due to their dead batteries. Future satellites equipped with long-lived rechargeable batteries could be fitted with solar chargers, extending their usefulness many times over.
For now though, the working prototype they’ve developed might still be suitable for use in small everyday electronics like hearing aids or remote controls. For consumer electronics or electrical vehicles, much more work remains to engineer the battery structure, increase the energy density, scale up the batteries and increase the number of cycles.
Original Article: Stanford researchers make rechargeable batteries that store six times more charge
More from: Stanford University | National Chung Cheng University
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Alkali metal-chlorine batteries
- Benchmark Mineral Intelligence EV Battery Metal Prices
Battery / EV Metals Price BMI Lithium Carbonate, EXW China, >=99.2% Li2CO3 15,175 BMI Lithium Hydroxide, EXW China, >=56.5% LiOH 13,950 BMI Cobalt Sulphate, EXW China, >20.5% Co 4,413 BMI Nickel ...
- Recent advances and perspectives of covalent organic frameworks for alkali-ion batteries
It is worth noting that in alkali metal ion batteries, larger ion sizes imply slower ion transport rates and larger volume changes during reversible cycling. Therefore, the influence of larger ion ...
- Lithium metal batteries with more safety and longer life (IMAGE)
Preeti Yadav (author) holding a glowing red LED (3V) powered by the modified separator-based lithium metal battery. Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news ...
- Cohesive Alkali Metal Bilayer Structure between Graphene Layers
Graphite, the electrode material used in batteries, is made up of multilayers of graphene with alkali metals sandwiched between the layers to enable electron flow during charging and discharge.
- Researchers discover tightest arrangement of bilayer alkali metals between graphene layers
Graphite, the electrode material used in batteries, is composed of multilayers of graphene, with alkali metals placed between the layers to facilitate the flow of electrons during charging and ...
Go deeper with Google Headlines on:
Alkali metal-chlorine batteries
[google_news title=”” keyword=”alkali metal-chlorine batteries” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Rechargeable batteries
- Breakthrough in Sodium Battery Chemistry Promises Lower Costs
A new mass synthesis process for sodium-containing sulfides could make all-solid-state sodium batteries more affordable and safer than lithium-ion batteries.
- Paleblue Earth batteries eliminate the one big pain point of rechargeables
Charging via USB-C and shipping in sustainable packaging too, Paleblue Earth's batteries are looking to make a difference.
- Schneider Electric Launches All-In-One Battery Energy Storage System (BESS) for Microgrids
Schneider Electric, the global leader in digital transformation of energy management and automation, today announced the launch of its latest ...
- Using sodium to develop rechargeable batteries may bolster the EU's green ambitions
A green industrial future for Europe may depend on an element that is part of a household staple: table salt. Dr. John Abou-Rjeily, a researcher at Tiamat Energy in France, is using sodium to develop ...
- The latest battery-powered Ring doorbell is at its lowest price ever
If you've put off setting up a home security system, take the first step by snagging this Ring doorbell at Amazon.
Go deeper with Google Headlines on:
Rechargeable batteries
[google_news title=”” keyword=”rechargeable batteries” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]