Formamidinium lead iodide is a very good material for photovoltaic cells, but getting the correct and stable crystal structure is a challenge. The techniques developed so far have produced rather poor results. However, University of Groningen scientists, led by Professor of Photophysics and Optoelectronics Maria Antonietta Loi, have now cracked it – using a blade and a dipping solution.
The results were published in the journal Nanoscale on 15 March 2019.
Formamidinium lead iodide (FAPbI3) is a perovskite, a crystal with a distinctive structure. Perovskites are named after a mineral that has the chemical formula ABX3. In an idealized cubic unit cell, the X position is occupied by anions that form an octahedron with a central cation in the B position while the corners of the cube are occupied by the A position cations (see picture).
Industrial production
‘This formamidinium lead iodide material has very good characteristics, but the A position formamidinium ion causes instability in the structure,’ explains Loi. 3D films made from this material most often turn out to be a mixture of a photoactive and a photoinactive phase, the latter being detrimental to the final application. Loi therefore set her PhD student Sampson Adjokatse to work to find a solution.
After trying different strategies, he found one that worked. ‘And most importantly, one that is scalable and could be used for industrial production,’ says Loi. After all, solar cells must be produced in large panels and it is very important to find a good and cheap technique to do so.
Adjokatse started with a different perovskite, in which the formamidinium was replaced by a larger 2?phenylethylammonium molecule, and in doing so formed a 2D perovskite. This material was deposited as a thin film using the ‘doctor-blade’ technique, related to techniques widely used in industrial processes such as printing.
Blade
‘Basically, you spread the material onto a substrate using a blade,’ explains Adjokatse. The blade can be set to produce a film with a thickness of around 500 nanometres, creating the 2D perovskite layer. ‘The important point is that these films are very smooth with large crystalline domains of up to 15 micrometres,’ says Adjokatse. The smooth 2D films based on 2-phenylethylammonium lead iodide were used as a template to produce 3D formamidinium lead iodide films.
This was achieved by dipping the 2D film in a solution containing formamidinium iodide. This resulted in the growth of a 3D film through ‘cation exchange’, where formamidinium took the place of 2?phenylethylammonium. ‘These films show much higher photoluminescence compared to reference 3D formamidinium lead iodide films and show increased stability when exposed to light or moisture,’ says Loi. ‘This means that we now have a method for the production of high-quality films for perovskite solar cells using an industrially scalable technique.’
Learn more: Making solar cells can be like buttering bread
The Latest on: Perovskite solar cells
[google_news title=”” keyword=”perovskite solar cells” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Perovskite solar cells
- Researchers outline path forward for tandem solar cellson April 26, 2024 at 7:22 am
As the old saying goes, two heads are better than one. The same is true when it comes to solar cells working in tandem. Researchers at the U.S. Department of Energy's National Renewable Energy ...
- LaFeO3 Perovskite Fuel Cell Technology Boosts SRMAP's Clean Energy Missionon April 26, 2024 at 6:45 am
The significance of this invention cannot be understated in an era where the reliance on clean and efficient energy conversion methods is paramount ...
- The Myths And Truths About Why Electric Cars Don't Have Solar Panelson April 25, 2024 at 7:00 am
Although solar energy alone cannot fully power a car for real-world usage, manufacturers are overcoming challenges and getting closer by the hour.
- Ultra-thin, flexible solar cells demonstrate their promise in a commercial quadcopter droneon April 24, 2024 at 9:27 am
Whether on Earth or in space, autonomous energy is critical in order to keep power systems running independently for extended periods of time, particularly in remote or unpredictable environments.
- NREL updates interactive chart of solar cell efficiencyon April 24, 2024 at 8:44 am
The US National Renewable Energy Laboratory (NREL) has updated its research cell efficiency chart for a range of PV technologies.
- Perovskite cells power palm-sized droneon April 24, 2024 at 4:19 am
Researchers at the Johannes Kepler University in Linz and the Linz Institute for Organic Solar Cells in Austria have developed ultra-lightweight quasi-2D perovskite solar cells with a power output of ...
- Pros and cons of solar energyon April 18, 2024 at 7:13 am
Solar power could become the primary source of electricity worldwide by 2050 – but there are still clouds in the forecast ...
- Researchers design 31%-efficient perovskite solar cell based on calcium nitrogen iodideon April 18, 2024 at 2:01 am
An international team has demonstrated a perovskite solar cell relying on inorganic calcium nitrogen iodide (Ca3NI3) perovskite and has found this absorber material offers advantages such as tunable ...
- New vapor deposition tech could accelerate commercialization of perovskite solar cellson April 17, 2024 at 9:15 am
A U.S.-based team developed a vapor deposition technique to fabricate outperforming all-inorganic perovskite thin films in under 5 minutes in a continuous process. The adoption of the proposed ...
- “Extraordinary Potential” – The New Dawn of Low-Cost, High-Efficiency Solar Cellson April 15, 2024 at 12:47 pm
Commercial solar panels currently have the capability to transform approximately 15% to 20% of the sunlight they capture into electrical power. However, experts at Soochow University suggest there's ...
via Bing News