Formamidinium lead iodide is a very good material for photovoltaic cells, but getting the correct and stable crystal structure is a challenge. The techniques developed so far have produced rather poor results. However, University of Groningen scientists, led by Professor of Photophysics and Optoelectronics Maria Antonietta Loi, have now cracked it – using a blade and a dipping solution.
The results were published in the journal Nanoscale on 15 March 2019.
Formamidinium lead iodide (FAPbI3) is a perovskite, a crystal with a distinctive structure. Perovskites are named after a mineral that has the chemical formula ABX3. In an idealized cubic unit cell, the X position is occupied by anions that form an octahedron with a central cation in the B position while the corners of the cube are occupied by the A position cations (see picture).
Industrial production
‘This formamidinium lead iodide material has very good characteristics, but the A position formamidinium ion causes instability in the structure,’ explains Loi. 3D films made from this material most often turn out to be a mixture of a photoactive and a photoinactive phase, the latter being detrimental to the final application. Loi therefore set her PhD student Sampson Adjokatse to work to find a solution.
After trying different strategies, he found one that worked. ‘And most importantly, one that is scalable and could be used for industrial production,’ says Loi. After all, solar cells must be produced in large panels and it is very important to find a good and cheap technique to do so.
Adjokatse started with a different perovskite, in which the formamidinium was replaced by a larger 2?phenylethylammonium molecule, and in doing so formed a 2D perovskite. This material was deposited as a thin film using the ‘doctor-blade’ technique, related to techniques widely used in industrial processes such as printing.
Blade
‘Basically, you spread the material onto a substrate using a blade,’ explains Adjokatse. The blade can be set to produce a film with a thickness of around 500 nanometres, creating the 2D perovskite layer. ‘The important point is that these films are very smooth with large crystalline domains of up to 15 micrometres,’ says Adjokatse. The smooth 2D films based on 2-phenylethylammonium lead iodide were used as a template to produce 3D formamidinium lead iodide films.
This was achieved by dipping the 2D film in a solution containing formamidinium iodide. This resulted in the growth of a 3D film through ‘cation exchange’, where formamidinium took the place of 2?phenylethylammonium. ‘These films show much higher photoluminescence compared to reference 3D formamidinium lead iodide films and show increased stability when exposed to light or moisture,’ says Loi. ‘This means that we now have a method for the production of high-quality films for perovskite solar cells using an industrially scalable technique.’
Learn more: Making solar cells can be like buttering bread
The Latest on: Perovskite solar cells
[google_news title=”” keyword=”perovskite solar cells” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Perovskite solar cells
- Longi announces 27.30% efficiency for heterojunction back contact solar cellon May 9, 2024 at 10:07 am
The Chinese module manufacturer said the new efficiency record was confirmed by Germany’s Institute for Solar Energy Research (ISFH).
- Powering drones with ultra-thin, flexible perovskite PV cellson May 9, 2024 at 1:07 am
An Austrian research team has demonstrated lightweight, flexible and ultra-thin perovskite solar technology in palm-sized autonomous drones, showcasing the stability and energy-harvesting potential of ...
- LONGi reaches 27.3% efficiency on HJT solar cells in labon May 8, 2024 at 5:11 am
LONGi has broken another world-record for silicon solar cell efficiency. As certified by Germany's Institute for Solar Energy Research Hamelin (ISFH), new ...
- Low-energy process for high-performance solar cellson May 7, 2024 at 3:50 pm
Finding reliable, eco-friendly power sources is crucial as our world grapples with increasing energy needs and the urgent call to combat climate change. Solar energy offers one solution, with ...
- UCSB pioneers a low-energy process for high-performance solar cellson May 6, 2024 at 8:05 am
Researchers at UC Santa Barbara developed a way to make perovskite films at room temperature. This material has emerged as a promising alternative to conventional, silicon solar cells.
- Improving perovskite solar cell performance with conductive adhesive inkon May 6, 2024 at 3:23 am
Conceived by researchers from Iran, the new conductive adhesive ink is made of polymethyl methacrylate (PMMA) and is used as an interlayer between the cell's hole transport layer and carbon foil. It ...
- Researchers pioneer a low-energy process for high-performance solar cellson May 5, 2024 at 5:00 pm
Solar energy offers one solution, with scientists devising ever more efficient materials for capturing sunlight. Perovskite solar cells have emerged as a promising alternative to conventional, silicon ...
- Perovskite Solar Cells: What Are They & How Do They Work?on May 4, 2024 at 7:15 am
This renewable energy technology has shown huge potential for over a decade, if only a few large obstacles could be overcome on the road to market.
- Can perovskite solar cells outshine silicon and revolutionize solar energy?on May 3, 2024 at 3:06 am
For decades, the familiar blue rectangles of silicon solar panels have dominated rooftops across the globe with the increasing adoption of solar energy. While these panels have become a reliable ...
- New material for perovskite solar cells can improve their stability and efficiencyon May 2, 2024 at 12:35 pm
A team of chemists from Kaunas University of Technology (KTU), Lithuania developed a new material for perovskite solar cells. After polymerisation, it can be used as a hole transporting layer in both ...
via Bing News
