Not only does this allow freeform additive fabrication on six axes, it also enables an “undo” function
The additive layer process of conventional 3D printers means they are usually limited to bottom up fabrication on three axes. The Mataerial printer managed to defy gravity by using a quick-solidifying print material, but now the LA-based NSTRMNT team led by Brian Harms, a Masters student at the Southern California Institute of Architecture, has created a 3D printing process called suspended disposition that gets around gravity by printing objects within a gel. Not only does this allow freeform additive fabrication on six axes, it also enables an “undo” function.
The NSTRMNT 3D printer utilizes a six-axes robotic arm from Stäubli Robotics with a peristaltic pump mounted on it. This injects a light-cured liquid resin into a gel that acts as a support structure for the printed object. The pump’s flow rate is controlled by an Arduino, which is coordinated with the motion of the robot to create the prints. The Arduino also controls the pump’s flow direction, giving it the ability to delete parts of the printed object by sucking instead of extruding.
After a print is completed, the liquid resin is exposed to ultraviolet light for one to two minutes, which hardens the structure. “We also have UV LEDs mounted on the pump, but in our experience they take far too long to cure the resin,” explains Harms. Like printed support structures on traditional 3D printed objects, the gel holds the resin in place until it is cured and ready for removal.
“The gel can be reused many times, as long as it does not dry out,” Harms tells Gizmag. “We got in the habit of covering the gel container when not in use, and we could reuse the gel for several weeks. We haven’t fully tested the maximum duration for reuse, but I imagine it could be a few months.”
To calculate the movements of the robot’s joints, the NSTRMNT printer uses an inverse kinematics solver that Harms developed for Grasshopper (the 3D modeling plugin for Rhino, a 3D CAD program).
“We design our geometry, it is converted to toolpaths, and we run the robot along those paths. But, the robot can be controlled manually using the controller pendant that comes with each robot,” Harms tells Gizmag. This allows a user to pause an operating print and move the robot as the pump extrudes resin. “In this way it is a sort of live drawing tool – kind of like an etch-a-sketch in 3D.”
The Latest Bing News on:
Printing in gel
- 11 drugs now in shortageon April 26, 2024 at 7:48 am
Here are 11 new shortages, according to drug supply databases from the FDA and the American Society of Health-System Pharmacists. Editor's note: The drugs are listed in alphabetical order.
- Beauty Love Is in the Air at Luxe Pack & MakeUp in LAon April 26, 2024 at 6:15 am
The co-located event on February 14-15 played on a Valentine’s Day theme—& highlighted beauty, skincare and fragrance packaging & formulation innovations.
- Best white sneakers to buy on KICKS CREW in Summer 2024on April 24, 2024 at 9:15 am
The summer season is right around the corner and with the weather warming up, expect sneakerheads to start breaking out the fresh pairs they’ve been stocking since the fall. No fashion statement is as ...
- Art Seeks Enlightenment in Darknesson April 24, 2024 at 6:48 am
To enter Kehinde Wiley’s show “An Archaeology of Silence” is to step into darkness, where only the art itself seems to emit light. The space feels somewhere between a crypt and a cathedral, featuring ...
- Imogen Cunningham: The Light Withinon April 23, 2024 at 6:36 am
Paul Martineau, curator of photographs at the J. Paul Getty Museum, will explore the career of Imogen Cunningham. In an era dominated by male photographers, Cunningham stood out as one ...
- 15 Best Ulta Products Beauty Editors are Begging You to Try in 2024on April 23, 2024 at 6:28 am
Neimra Coulibaly is a beauty contributor at Cosmopolitan where she writes about hair, nails, makeup, and skin, including winter nail colors. She's an expert in all things beauty, especially the best ...
- Unlocking efficiency and profitability in dental labson April 17, 2024 at 9:39 pm
Anthony Gillitt discusses the power of multi-material technology in creating efficiency and profitability in dental labs.
- In Australia, ‘Cats Are Just Catastrophic’on April 16, 2024 at 7:17 am
Feral cats take a heavy toll on the world’s wildlife, especially Down Under. The solution? Smarter traps, sharpshooters, survival camp for prey species, and the “Felixer.” ...
- Hospital staff need protection; is pepper gel the right prescription?on April 16, 2024 at 5:57 am
In the rush to protect front-line hospital staff, has the NDP government put its pepper gel before the cart? Last week, responding to criticism the province had been lax in addressing security ...
- Scientists develop maleic acid-treated bacterial cellulose gel for enhancing bone repairon April 15, 2024 at 1:48 pm
The field of bone tissue engineering (BTE) is a promising avenue for addressing bone injuries and defects by constructing artificial scaffolds with bionic functionalities. Due to its unique 3D network ...
The Latest Google Headlines on:
Printing in gel
[google_news title=”” keyword=”Printing in gel” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
Additive fabrication
- UMaine’s novel polymer 3D printer surpasses former Guinness World Recordon April 26, 2024 at 6:03 pm
Four times larger than its predecessor, FoF 1.0 offers new opportunities in composite materials, including development of recycled and bio-based materials.
- This is the world's largest 3D printer: The University of Maine breaks its own recordon April 26, 2024 at 8:42 am
Forward-looking: The University of Maine has broken its own 2019 Guinness World Record with a next-gen polymer 3D printer that is four times the size of its predecessor. Dubbed Factory of the Future 1 ...
- Q1 2024 Lincoln Electric Holdings Inc Earnings Callon April 25, 2024 at 5:00 pm
Amanda H. Butler; VP of IR & Communications; Lincoln Electric Holdings, Inc. Gabriel Bruno; Executive VP, CFO & Treasurer; Lincoln Electric Holdings, Inc. Steven B ...
- World's Largest 3D Printer Constructs Homes—A Larger One Was Just Unveiled in Maineon April 24, 2024 at 2:10 am
The University of Maine (UMaine) recently unveiled a new 3D printer, known as the Factory of the Future 1.0 (FoF 1.0), at the Advanced Structures and Composites Center (ASCC).
- Composite AM Market to Grow by 21% in 2023on April 24, 2024 at 1:42 am
In a new report, Voxelmatters Research shows expected growth the composite AM market, with data from manufacturers, providers and more.
- BMF 3D printed dental veneer material receives FDA 510(k) clearanceon April 24, 2024 at 1:36 am
Boston Micro Fabrication (BMF) has received FDA 510(k) clearance for its UltraThineer material, which enables what BMF believes to be the world’s thinnest cosmetic dental veneers.
- Novel graphene oxide spray coating advances antiviral protection of face maskson April 22, 2024 at 9:57 am
In the relentless battle against airborne viruses, researchers have developed a new spray coating to improve the antiviral efficacy of personal protective equipment, notably face masks. The study is ...
- Farsoon introduces SRS technology to reduce need for support structures in low-hanging angles in metal 3D printingon April 22, 2024 at 3:20 am
Farsoon has introduced a new technology which is said to enable the additive fabrication of inverted conical structures and horizontal circular holes with no support structures.
- GKN Aerospace Secures Contract with Swedish Defence for Future Fighter Systems Developmenton April 22, 2024 at 2:49 am
GKN Aerospace has been awarded a contract by the Swedish Defence Materiel Administration (FMV) to conduct conceptual studies for advanced power a ...
- Glass Additives Market To Reach USD 2.2 Billion By 2032, Report By DataHorizzon Researchon April 22, 2024 at 1:10 am
The glass additives market size was valued at USD 1.6 Billion in 2023 and is expected to reach a market size of USD 2.2 Billion by 2032 at a CAGR of 3.7%.Fort Collins, Colorado, April 22, 2024 (GLOBE ...
The Latest Google Headlines on:
Additive fabrication
[google_news title=”” keyword=”additive fabrication” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]