MIT researchers create material for a chemical heat “battery” that could release its energy on demand.
In large parts of the developing world, people have abundant heat from the sun during the day, but most cooking takes place later in the evening when the sun is down, using fuel — such as wood, brush or dung — that is collected with significant time and effort.
Now, a new chemical composite developed by researchers at MIT could provide an alternative. It could be used to store heat from the sun or any other source during the day in a kind of thermal battery, and it could release the heat when needed, for example for cooking or heating after dark.
A common approach to thermal storage is to use what is known as a phase change material (PCM), where input heat melts the material and its phase change — from solid to liquid — stores energy. When the PCM is cooled back down below its melting point, it turns back into a solid, at which point the stored energy is released as heat. There are many examples of these materials, including waxes or fatty acids used for low-temperature applications, and molten salts used at high temperatures. But all current PCMs require a great deal of insulation, and they pass through that phase change temperature uncontrollably, losing their stored heat relatively rapidly.
Instead, the new system uses molecular switches that change shape in response to light; when integrated into the PCM, the phase-change temperature of the hybrid material can be adjusted with light, allowing the thermal energy of the phase change to be maintained even well below the melting point of the original material.
This blue LED lamp setup is used to trigger the heat discharge from large-scale films of phase-change materials. (Melanie Gonick/MIT)
The new findings, by MIT postdocs Grace Han and Huashan Li and Professor Jeffrey Grossman, are reported this week in the journal Nature Communications.
“The trouble with thermal energy is, it’s hard to hold onto it,” Grossman explains. So his team developed what are essentially add-ons for traditional phase change materials, or, “little molecules that undergo a structural change when light shines on them.” The trick was to find a way to integrate these molecules with conventional PCM materials to release the stored energy as heat, on demand. “There are so many applications where it would be useful to store thermal energy in a way lets you trigger it when needed,” he says.
The researchers accomplished this by combining the fatty acids with an organic compound that responds to a pulse of light. With this arrangement, the light-sensitive component alters the thermal properties of the other component, which stores and releases its energy. The hybrid material melts when heated, and after being exposed to ultraviolet light, it stays melted even when cooled back down. Next, when triggered by another pulse of light, the material resolidifies and gives back the thermal phase-change energy.
“By integrating a light-activated molecule into the traditional picture of latent heat, we add a new kind of control knob for properties such as melting, solidification, and supercooling,” says Grossman, who is the Morton and Claire Goulder and Family Professor in Environmental Systems as well as professor of materials science and engineering.
The UV-activated thermal energy storage material shows the rapid crystallization and heat discharge upon visible light (blue LED) illumination. (Grossman Group at MIT)
The system could make use of any source of heat, not just solar, Han says. “The availability of waste heat is widespread, from industrial processes, to solar heat, and even the heat coming out of vehicles, and it’s usually just wasted.” Harnessing some of that waste could provide a way of recycling that heat for useful applications.
“What we are doing technically,” Han explains, “is installing a new energy barrier, so the stored heat cannot be released immediately.” In its chemically stored form, the energy can remain for long periods until the optical trigger is activated. In their initial small-scale lab versions, they showed the stored heat can remain stable for at least 10 hours, whereas a device of similar size storing heat directly would dissipate it within a few minutes. And “there’s no fundamental reason why it can’t be tuned to go higher,” Han says.
In the initial proof-of-concept system “the temperature change or supercooling that we achieve for this thermal storage material can be up to 10 degrees C (18 F), and we hope we can go higher,” Grossman says.
Under a dark-field microscope, the microscale environment shows the rapid crystal growth can easily be monitored. (Grossman Group at MIT)
Already, in this version, “the energy density is quite significant, even though we’re using a conventional phase-change material,” Han says. The material can store about 200 joules per gram, which she says is “very good for any organic phase-change material.” And already, “people have shown interest in using this for cooking in rural India,” she says. Such systems could also be used for drying agricultural crops or for space heating.
“Our interest in this work was to show a proof of concept,” Grossman says, “but we believe there is a lot of potential for using light-activated materials to hijack the thermal storage properties of phase change materials.”
“This is highly creative research, where the key is that the scientists combine a thermally driven phase-change material with a photoswitching molecule, to build an energy barrier to stabilize the thermal energy storage,” says Junqiao Wu, a professor of materials science and engineering at the University of California at Berkeley, who was not involved in the research. “I think the work is significant, as it offers a practical way to store thermal energy, which has been challenging in the past.”
Learn more: A new way to store thermal energy
The Latest on: Thermal battery
[google_news title=”” keyword=”thermal battery” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]- Automotive Thermal Systems Market To Reach USD 175.4 Billion By 2032, Says DataHorizzon Researchon April 27, 2024 at 4:00 am
The automotive thermal systems market was valued at USD 102.2 Billion in 2023 and is expected to reach a market size of USD 175.4 Billion by 2032 at a CAGR of 6.2%.Fort Collins, Colorado, April 27, ...
- Engineers develop innovative battery technology that could change the future of remote devices: 'An integrated device that could harvest ambient thermal energy'on April 27, 2024 at 3:30 am
With simple increases and decreases in temperature, the new battery can generate enough charge for practical applications in many industries. Engineers develop innovative battery technology that could ...
- Thermal Battery Solar Technology Soon to Rapidly Deliver On-site Power Generation for Data Centerson April 26, 2024 at 3:25 pm
Exowatt has announced a new type of self-contained solar power generation, set to be available at scale later this year.
- CATL's 1,000-km LFP EV battery super-charges at 1 km/secon April 25, 2024 at 8:54 pm
CATL made headlines around the globe last August when it presented the Shenxing battery, an LFP pack capable of adding 400 kilometers (249 miles) of range in a mere 10 minutes at the charger. Not a ...
- Tesla Put an End to the EV Battery FUD When It Solved the Model S Problems After 2015on April 25, 2024 at 8:31 am
After Tesla solved the battery problems with the 2012-2015 Model S, battery replacement outside of recalls have been exceedingly rare, a Recurrent study shows ...
- Aviation-specific battery system uses advanced composites to address electric, hybrid flighton April 23, 2024 at 10:23 pm
BOLDair’s composite enclosures, compression structures and thermal runaway management enables high-performance electric energy storage.
- Innovative nanocoating shown to significantly enhance battery casing fire resistanceon April 23, 2024 at 1:58 am
Science X is a network of high quality websites with most complete and comprehensive daily coverage of the full sweep of science, technology, and medicine news ...
- Preventing thermal runaway at every level of EV battery assemblyon April 21, 2024 at 3:07 am
There is currently a lack of clear regulation around TRP standards. But across the industry, many OEMs have adopted the “5-minute rule” as the standard, meaning if a thermal runaway event happens, ...
- Bursting into flames: Protect yourself from lithium-ion battery hazardson April 20, 2024 at 7:00 am
Lithium-ion batteries are in tons of tech, from your smartphone to electric vehicles. Here's how to protect against fire risks.
- JLR Taps Irving-Based Alkegen To Bring ‘Advanced Thermal Protection’ to Next‑Gen EV Battery Systemson April 17, 2024 at 3:27 pm
JLR—formerly known as Jaguar Land Rover—has chosen Irving-based Alkegen, a high-performance specialty materials company pioneering innovative solutions for the battery industry, for a new range of ...
via Google News and Bing News