Most of the 150 million tons of plastics produced around the world every year end up in landfills, the oceans and elsewhere. Less than 9 percent of plastics are recycled in the United States, rising to about 30 percent in Europe.
That’s a $176 billion problem, the potential energy savings scientists say could be achieved from recycling all global plastic solid waste. But new approaches can increase the amount of plastic waste that can be successfully recycled, researchers from the University of Houston and IBM report in a perspective published this week in Science.
That means developing new plastics that are more easily recycled, along with finding ways to more efficiently recycle existing plastics. These approaches can range from methods to recycle different types of plastics together in one waste stream, avoiding a costly and time-consuming sorting process, as well as methods to break down plastics in a more energy-efficient manner.
“Recent research points the way toward chemical recycling methods with lower energy requirements, compatibilization of mixed plastic wastes to avoid the need for sorting, and expanding recycling technologies to traditionally nonrecyclable polymers,” wrote the article authors, Megan L. Robertson, associate professor of chemical and biomolecular engineering at UH, and Jeannette M. Garcia, a polymer chemist at the IBM Almaden Research Center.
Improving methods to recycle existing plastic materials is a key priority. “New materials enter the market slowly, and thus the biggest impact is in developing more efficient methods to recycle the plastics that are produced in large quantities today,” said Robertson. “One the other hand, research advances can pave the way for more easily recyclable materials for the future.” One example is the category of polymers known as thermosets, which can’t be melted down for repurposing, preventing their recycling with traditional methods.
Robertson’s lab develops biorenewable components for thermosets, replacing hydrocarbon-based polymers with those made from vegetable oils or other plant-based materials. That could lead to new end-of-life options such as composting or chemical recycling for these materials, a huge leap forward.
The perspective is part of a series published by Science to explore issues related to the environmental impact of polymers, including their source (petroleum vs. biosources), advances in recycling and biodegradable polymers.
Robertson and Garcia note three key issues:
- Plastics must be sorted for recycling, which adds effort and expense. Plastics, or polymers, are comprised of large molecules, so most don’t mix when heated, similar to the interaction between oil and water. Research is focused on finding substances that can facilitate the mixing of different types of plastics, known as compatibilizers, allowing them to be recycled together. Finding a compatibilizer that works for all polymers would be ideal, but Robertson said current technology requires a tailored approach for each plastic mixture.
- Chemical recycling involves using a catalyst to break down plastics to produce lower-molecular-weight products, a process the researchers say has been hindered by high energy costs. Work to develop more efficient catalysts is underway.
- The majority of plastics currently recycled are composed of polyethylene terephthalate (PET), which is the component used in most water bottles, and polyethylene, the most highly produced plastic. Expanding recycling technologies to other plastics beyond PET and polyethylene is an ongoing area of research. Even more challenging is developing methods for recycling polymers that can’t be processed through melting at elevated temperatures, such as thermosets and elastomers (rubber materials).
With any potential solution, the researchers say it is critical that a material’s performance isn’t impacted in order to make it easier to recycle. Subjecting plastics to many use and recycling cycles without loss of performance is an open challenge for researchers.
“Enhancing plastics recycling beyond the current level has many potential societal advantages, such as reducing greenhouse gas emissions, avoiding waste buildup in the environment, decreasing the dependence on finite petroleum resources for its production, and recovering the economic value of plastic solid waste,” the researchers wrote.
That has begun, they say, pointing to start-up companies that have scaled up chemical recycling methods for polystyrene waste or developed sorting processes to separate materials into pure feedstocks.
That and other research, they wrote, “raise hope that before long, recycling rates for plastics will be much higher than today.”
Learn more: Scientific Advances Can Make it Easier to Recycle Plastics
The Latest on: Plastic solid waste
[google_news title=”” keyword=”plastic solid waste” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
- Spring Fling gets underway; hazardous waste event May 18on April 26, 2024 at 2:03 am
The Hot Springs Solid Waste Department's free Household Hazardous Waste Collection event will be held on Saturday, May 18, from 8 a.m. to 1 p.m. at the Garland County Fairgrounds, 4831 Malvern Ave.
- Let's not trash recycling technologies that could end plastic wasteon April 25, 2024 at 4:31 am
Some environmental campaigners claim that attempts to create a circular economy for plastics are doomed to fail – but the arguments can be disingenuous ...
- Jackson County Solid Waste to host community cleanupon April 24, 2024 at 2:39 pm
Jackson County Solid Waste is holding a community cleanup in Dutton on Saturday, April 27. A recycle trailer will be set up across from the town hall. Items accepted include paper, plastic bottles, ...
- Cyclyx expands post-use plastic collection programon April 24, 2024 at 7:23 am
The plastic waste will then be processed to prepare it for use in a range of new and existing recycling technologies. Cyclyx has begun predevelopment efforts for its second CCC (CCC2. When combined, ...
- How plastic waste management affects circular economy in Can Gioon April 24, 2024 at 6:00 am
The project "Plastic waste management in Can Gio based on a circular economy model" was successfully conducted after two years of collaboration between parties and Can Gio residents.
- Brightmark Announces Intent to Invest $950 Million in Upson County, GA to Tackle Plastic Pollutionon April 23, 2024 at 8:01 pm
Brightmark LLC, a circular solutions company with a mission to Reimagine Waste®, announced plans to develop a 2.5 million-square-foot circularity center ...
- Hong Kong implements ban on Styrofoam products and single-use plasticon April 22, 2024 at 9:16 am
Hong Kong has enacted new legislation to curb the use of single-use plastic cutlery and Styrofoam products, aiming to tackle pollution, officials said.
- Plastic itself isn’t the enemy – plastic waste is. Fascinating insights from EFG’s Melanie Beyeleron April 22, 2024 at 3:16 am
Plastics have become a staple of our modern existence. In fact, the demand for plastics has doubled over the past two decades and is projected to double again ...
- In Lucknow’s waste-side story, plastic peril paints grim pictureon April 21, 2024 at 5:38 pm
Nearly 300 metric tonnes of plastic waste is generated in Lucknow every day -- a five-fold jump from 59 tonnes in 2015 that poses a threat to human health, depletes nutritional quality of soil and rai ...
- Colleges are reducing food waste through composting. Rhode Island cities and towns should, too.on April 16, 2024 at 3:00 am
Diverting food waste from landfills to composting programs curtails methane emissions and extends the life of landfills, writes a Bryant University faculty member.
via Google News and Bing News