New “HAMR-E” robots could enable inspection of complex machines without dismantling them
Jet engines can have up to 25,000 individual parts, making regular maintenance a tedious task that can take over a month per engine. Many components are located deep inside the engine and cannot be inspected without taking the machine apart, adding time and costs to maintenance. This problem is not only confined to jet engines, either; many complicated, expensive machines like construction equipment, generators, and scientific instruments require large investments of time and money to inspect and maintain.
Researchers at Harvard University’s Wyss Institute for Biologically Inspired Engineering and John A. Paulson School of Engineering and Applied Sciences (SEAS) have created a micro-robot whose electroadhesive foot pads, origami ankle joints, and specially engineered walking gait allow it to climb on vertical and upside-down conductive surfaces, like the inside walls of a commercial jet engine. The work is reported in Science Robotics.
“Now that these robots can explore in three dimensions instead of just moving back and forth on a flat surface, there’s a whole new world that they can move around in and engage with,” said first author Sébastien de Rivaz, a former Research Fellow at the Wyss Institute and SEAS who now works at Apple. “They could one day enable non-invasive inspection of hard-to-reach areas of large machines, saving companies time and money and making those machines safer.”
The new robot, called HAMR-E (Harvard Ambulatory Micro-Robot with Electroadhesion), was developed in response to a challenge issued to the Harvard Microrobotics Lab by Rolls-Royce, which asked if it would be possible to design and build an army of micro-robots capable of climbing inside parts of its jet engines that are inaccessible to human workers. Existing climbing robots can tackle vertical surfaces, but experience problems when trying to climb upside-down, as they require a large amount of adhesive force to prevent them from falling.
The team based HAMR-E on one of its existing micro-robots, HAMR, whose four legs enable it to walk on flat surfaces and swim through water. While the basic design of HAMR-E is similar to HAMR, the scientists had to solve a series of challenges to get HAMR-E to successfully stick to and traverse the vertical, inverted, and curved surfaces that it would encounter in a jet engine.
First, they needed to create adhesive foot pads that would keep the robot attached to the surface even when upside-down, but also release to allow the robot to “walk” by lifting and placing its feet. The pads consist of a polyimide-insulated copper electrode, which enables the generation of electrostatic forces between the pads and the underlying conductive surface. The foot pads can be easily released and re-engaged by switching the electric field on and off, which operates at a voltage similar to that required to move the robot’s legs, thus requiring very little additional power. The electroadhesive foot pads can generate shear forces of 5.56 grams and normal forces of 6.20 grams – more than enough to keep the 1.48-gram robot from sliding down or falling off its climbing surface. In addition to providing high adhesive forces, the pads were designed to be able to flex, thus allowing the robot to climb on curved or uneven surfaces.
The scientists also created new ankle joints for HAMR-E that can rotate in three dimensions to compensate for rotations of its legs as it walks, allowing it to maintain its orientation on its climbing surface. The joints were manufactured out of layered fiberglass and polyimide, and folded into an origami-like structure that allows the ankles of all the legs to rotate freely, and to passively align with the terrain as HAMR-E climbs.
Finally, the researchers created a special walking pattern for HAMR-E, as it needs to have three foot pads touching a vertical or inverted surface at all times to prevent it from falling or sliding off. One foot releases from the surface, swings forward, and reattaches while the remaining three feet stay attached to the surface. At the same time, a small amount of torque is applied by the foot diagonally across from the lifted foot to keep the robot from moving away from the climbing surface during the leg-swinging phase. This process is repeated for the three other legs to create a full walking cycle, and is synchronized with the pattern of electric field switching on each foot.
When HAMR-E was tested on vertical and inverted surfaces, it was able to achieve more than one hundred steps in a row without detaching. It walked at speeds comparable to other small climbing robots on inverted surfaces and slightly slower than other climbing robots on vertical surfaces, but was significantly faster than other robots on horizontal surfaces, making it a good candidate for exploring environments that have a variety of surfaces in different arrangements in space. It is also able to perform 180-degree turns on horizontal surfaces.
HAMR-E also successfully maneuvered around a curved, inverted section of a jet engine while staying attached, and its passive ankle joints and adhesive foot pads were able to accommodate the rough and uneven features of the engine surface simply by increasing the electroadhesion voltage.
The team is continuing to refine HAMR-E, and plans to incorporate sensors into its legs that can detect and compensate for detached foot pads, which will help prevent it from falling off of vertical or inverted surfaces. HAMR-E’s payload capacity is also greater than its own weight, opening the possibility of carrying a power supply and other electronics and sensors to inspect various environments. The team is also exploring options for using HAMR-E on non-conductive surfaces.
“This iteration of HAMR-E is the first and most convincing step towards showing that this approach to a centimeter-scale climbing robot is possible, and that such robots could in the future be used to explore any sort of infrastructure, including buildings, pipes, engines, generators, and more,” said corresponding author Robert Wood, Ph.D., who is a Founding Core Faculty member of the Wyss Institute as well as the Charles River Professor of Engineering and Applied Sciences at SEAS.
“While academic scientists are very good at coming up with fundamental questions to explore in the lab, sometimes collaborations with industrial scientists who understand real-world problems are required to develop innovative technologies that can be translated into useful products. We are excited to help catalyze these collaborations here at the Wyss Institute, and to see the breakthrough advances that emerge,” said Wyss Founding Director Donald Ingber, M.D., Ph.D., who is also the Judah Folkman Professor of Vascular Biology at Harvard Medical School and the Vascular Biology Program at Boston Children’s Hospital, and Professor of Bioengineering at SEAS.
Learn more: Robots with sticky feet can climb up, down, and all around
The Latest on: Micro-robot
[google_news title=”” keyword=”micro-robot” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Micro-robot
- Sodexo selects ART to introduce robotic kiosks in US facilitieson April 26, 2024 at 10:29 am
Sodexo has partnered with Automated Retail Technologies (ART) to introduce thousands of hot food robotic kiosks across its facilities in the US. The partnership between Sodexo and ART combines global ...
- Walmart Deals of The Day: Super Savings on Printers, Robot Vacuums, and TVson April 26, 2024 at 9:58 am
And don't forget the Shark Ion Robot Vacuum (RV754), a game-changer in cleaning with its Tri-Brush System and voice command controls. Enjoy up to 36% savings on this robot vacuum, and explore more ...
- HITACHI ACQUIRES MA MICRO AUTOMATION OF GERMANY IN EFFORT TO ACCELERATE GLOBAL EXPANSION OF ROBOTIC SI BUSINESS IN THE MEDICAL AND OTHER FIELDSon April 26, 2024 at 4:49 am
Hitachi Ltd. (TSE: 6501, "Hitachi") has signed a stock purchase agreement on April 26 to acquire all shares of MA micro automation GmbH ("MA micro automation", headquartered in St. Leon-Rot, Germany) ...
- The robots aren’t coming for your jobs – they’re already here taking them, starting with fast foodon April 25, 2024 at 7:58 pm
A major fast-food chain has replaced drive-through workers with artificial intelligence software and a video of a customer’s encounter with the new tech has gone viral.
- Humanoid Robot Market CAGR of 35%, Human Element of Consumer Behavior Unveiling Insights with Ethnography Techniqueson April 25, 2024 at 4:20 pm
Humanoid Robot Market is valued at approximately USD 1,107 million in 2019 and is anticipated to grow with a healthy growth rate of more than 35% over the forecast period 2020-2027. Humanoid robots ...
- Assistive Robotics Market CAGR of 22.30%, Exploring Consumer Behavior, The Potential of Ethnography Techniqueson April 25, 2024 at 3:01 pm
Request To Download Free Sample of This Strategic Report @ Assistive Robotics Market is valued approximately at USD 4.10 Billion in 2019 and is anticipated to grow with a healthy growth rate of more ...
- Carbon-Based Tiny Robots Could Revolutionize Various Industrieson April 23, 2024 at 9:17 pm
In explaining his research, the professor in the Department of Mechanical Engineering alludes to the 1966 science-fiction film Fantastic Voyage, about a submarine vessel and its crew shrunk to microsc ...
- Dead spiders used as efficient micro-grabberson April 22, 2024 at 11:59 pm
Dead spiders could be used as efficient micro-grabbers. Scientists manipulate spider legs hydraulically after death. That way, they can be used to grab fine items, instead of using robots.
- $300,000 robotic micro-factories pump out custom-designed homeson April 20, 2024 at 12:57 am
Construction is the world’s largest industry, contributing 13% of global GDP. It is also the most inefficient, least digitised and most polluting industry. Now AUAR has begun rolling out an ingenious ...
- Robotic micro-factories for housebuilding? Listen to April’s 21CC podcaston April 19, 2024 at 5:21 am
CC April - April’s episode of the 21CC podcast is out, featuring Swiss manufacturer ABB's site-based micro-factories for UK housing.
via Bing News