Scientists at the Department of Energy’s Oak Ridge National Laboratory have designed and tested an all-solid lithium-sulfur battery with approximately four times the energy density of conventional lithium-ion technologies that power today’s electronics.
The ORNL battery design, which uses abundant low-cost elemental sulfur, also addresses flammability concerns experienced by other chemistries.
“Our approach is a complete change from the current battery concept of two electrodes joined by a liquid electrolyte, which has been used over the last 150 to 200 years,” said Chengdu Liang, lead author on the ORNL study published this week in Angewandte Chemie International Edition.
Scientists have been excited about the potential of lithium-sulfur batteries for decades, but long-lasting, large-scale versions for commercial applications have proven elusive. Researchers were stuck with a catch-22 created by the battery’s use of liquid electrolytes: On one hand, the liquid helped conduct ions through the battery by allowing lithium polysulfide compounds to dissolve. The downside, however, was that the same dissolution process caused the battery to prematurely break down.
The ORNL team overcame these barriers by first synthesizing a never-before-seen class of sulfur-rich materials that conduct ions as well as the lithium metal oxides conventionally used in the battery’s cathode. Liang’s team then combined the new sulfur-rich cathode and a lithium anode with a solid electrolyte material, also developed at ORNL, to create an energy-dense, all-solid battery.
“This game-changing shift from liquid to solid electrolytes eliminates the problem of sulfur dissolution and enables us to deliver on the promise of lithium-sulfur batteries,” Liang said. “Our battery design has real potential to reduce cost, increase energy density and improve safety compared with existing lithium-ion technologies.”
The new ionically-conductive cathode enabled the ORNL battery to maintain a capacity of 1200 milliamp-hours (mAh) per gram after 300 charge-discharge cycles at 60 degrees Celsius. For comparison, a traditional lithium-ion battery cathode has an average capacity between 140-170 mAh/g. Because lithium-sulfur batteries deliver about half the voltage of lithium-ion versions, this eight-fold increase in capacity demonstrated in the ORNL battery cathode translates into four times the gravimetric energy density of lithium-ion technologies, explained Liang.
The team’s all-solid design also increases battery safety by eliminating flammable liquid electrolytes that can react with lithium metal. Chief among the ORNL battery’s other advantages is its use of elemental sulfur, a plentiful industrial byproduct of petroleum processing.
“Sulfur is practically free,” Liang said. “Not only does sulfur store much more energy than the transition metal compounds used in lithium-ion battery cathodes, but a lithium-sulfur device could help recycle a waste product into a useful technology.”
Although the team’s new battery is still in the demonstration stage, Liang and his colleagues hope to see their research move quickly from the laboratory into commercial applications. A patent on the team’s design is pending.
“This project represents a synergy between basic science and applied research,” Liang said. “We used fundamental research to understand a scientific phenomenon, identified the problem and then created the right material to solve that problem, which led to the success of a device with real-world applications.”
The Latest Bing News on:
Lithium-sulfur batteries
- San Jose battery maker ships samples for automotive and military evaluationon May 9, 2024 at 10:41 am
Lyten has shipped A samples of its 6.5 Ah lithium-sulfur pouch cells to Stellantis and other leading U.S. and EU automotive OEMs for evaluation.
- Lyten Ships Lithium-Sulfur Battery A-Samples for Automotive, Consumer Electronics, and Military Customer Evaluationon May 8, 2024 at 3:00 am
Lyten, the supermaterial applications company and global leader in lithium-sulfur battery technology, today announced it has shipped A samples of its 6.5 Ah (C/3 discharge rate, 25° C) lithium-sulfur ...
- AAM Briefson May 7, 2024 at 10:58 am
AAM Briefs is published in Advanced Air Mobility Report, an Aviation Week Intelligence Network (AWIN) Market Briefing and is included with your AWIN Premium membership. Already a member of AWIN or ...
- Innovative New Tech is Transforming the Battery Marketon May 7, 2024 at 8:00 am
The battery market is brimming with game-changing innovations, promising higher energy density, faster charging, and greener production methods.
- Charging future EVs could take seconds with new sodium-ion battery techon May 3, 2024 at 4:01 am
A new type of hybrid sodium-ion battery that offers both high capacity and rapid-charging capabilities could power mobile devices, electric vehicles and space tech.
- Scientists find breakthrough way to make batteries cheaper and more capableon May 2, 2024 at 12:47 pm
The world has become heavily dependent on lithium-ion batteries, used in everything from our cars to ... silicon, phosphorus, and sulfur into the cathode’s crystal structure,” said Hiroaki Kobayashi ...
- Zeta Energy Appoints Michael Everett as COOon May 2, 2024 at 8:16 am
Prior to joining Zeta Energy, a lithium-sulfur battery developer, Michael Everett previously served as president and COO at Advanced Battery Concepts.
- Three takeaways about the current state of batterieson May 2, 2024 at 3:00 am
First, there’s a new special report from the International Energy Agency all about how crucial batteries are for our future energy systems. The report calls batteries a “maste ...
- MIT Technology Reviewon May 2, 2024 at 3:00 am
First, there’s a new special report from the International Energy Agency all about how crucial batteries are for our future energy systems. The report calls batteries a “maste ...
- Australian lithium-sulfur battery player claims to have nailed safety standardson May 1, 2024 at 5:00 pm
Brisbane-based Li-S Energy has announced that its GEN3 semi-solid-state lithium sulfur (Li-S) battery cells have successfully passed a series of nail penetration tests, with the results exceeding ...
The Latest Google Headlines on:
Lithium-sulfur batteries
[google_news title=”” keyword=”lithium-sulfur batteries” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
All-solid lithium-sulfur battery
- San Jose battery maker ships samples for automotive and military evaluationon May 9, 2024 at 10:41 am
Lyten has shipped A samples of its 6.5 Ah lithium-sulfur pouch cells to Stellantis and other leading U.S. and EU automotive OEMs for evaluation.
- Ford CEO Jim Farley says semi-solid state batteries are 'promising for production'on May 9, 2024 at 9:07 am
Solid state batteries are one way researchers are seeking to address that challenge, since they potentially can offer a greater energy density. That means the vehicle would need fewer battery cells to ...
- Nissan Solid-State Battery Plant Nears Production Readinesson May 7, 2024 at 2:02 pm
Solid-state EV batteries are viewed as a solution for the many shortcomings of lithium-ion batteries, but they have seemed like a mirage that remains forever on the horizon. Nissan has put a stake in ...
- Innovative New Tech is Transforming the Battery Marketon May 7, 2024 at 8:00 am
The battery market is brimming with game-changing innovations, promising higher energy density, faster charging, and greener production methods.
- Solidion’s BEEP Platform Solves the Design and Manufacturing Issues of Solid-State Batterieson May 7, 2024 at 1:30 am
DAYTON, Ohio, May 07, 2024 (GLOBE NEWSWIRE) -- Solidion Technology, Inc. (Nasdaq: STI), an advanced battery technology ... (Gen 2), and lithium-sulfur cells (Gen 3), all featuring an advanced polymer- ...
- Australian lithium-sulfur battery player claims to have nailed safety standardson May 1, 2024 at 5:00 pm
Brisbane-based Li-S Energy has announced that its GEN3 semi-solid-state lithium sulfur (Li-S) battery cells have successfully passed a series of nail penetration tests, with the results exceeding ...
- Australian battery developer says its new lithium sulfur chemistry passes nail stab test, without explodingon April 30, 2024 at 10:13 pm
The Victoria battery maker has posted a video showing what happens to its cells versus what happens to an equivalent lithium ion version when penetrated with a nail.
- A 1,300-mile Solid-state Battery Could Become A Realityon April 10, 2024 at 5:00 pm
As is the case with the current generation of lithium ... (and its battery supplier WeLion) are part of a recently formed Chinese solid-state battery consortium called the China All-Solid-State ...
- New advance in all-solid-state battery technology enhances performance of lithium from the bottomon March 14, 2024 at 8:41 am
A research team has successfully enhanced the performance and durability of all-solid ... of lithium can quickly deplete the available lithium, leading to a significant reduction in the battery's ...
- lithium batteryon March 5, 2024 at 4:00 pm
One of the biggest issues facing the solid-state lithium-based batteries we all depend upon is of the performance of the anode; the transport of lithium ions and minimization of dendrite formation ...
The Latest Google Headlines on:
All-solid lithium-sulfur battery
[google_news title=”” keyword=”all-solid lithium-sulfur battery” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]