Researchers working at the National Institute of Standards and Technology (NIST) have developed a “piezo-optomechanical circuit” that converts signals among optical, acoustic and radio waves. A system based on this design could move and store information in next-generation computers.
The team’s work, published in Nature Photonics, also was presented at the March 2016 meeting of the American Physical Society in Baltimore, Md.
While Moore’s Law, the idea that the number of transistors on an integrated circuit will double every two years, has proven remarkably resilient, engineers will soon begin to encounter fundamental limits. As transistors shrink, heat and other factors will begin to have magnified effects in circuits. As a result, researchers are increasingly considering designs in which electronic components interface with other physical systems that carry information such as light and sound. Interfacing these different types of physical systems could circumvent some of the problems of components that rely on just one type of information carrier, if researchers can develop efficient ways of converting signals from one type to another (transduction).
For example, light is able to carry a lot of information and typically doesn’t interact with its environment very strongly, so it doesn’t heat up components like electricity does. As useful as light is, however, it isn’t suited to every situation. Light is difficult to store for long periods, and it can’t interact directly with some components of a circuit. On the other hand, acoustic wave devices are already used in wireless communications technology, where sound is easier to store for long periods in compact structures since it moves much more slowly.
To address such needs, NIST researchers and their collaborators built a piezoelectric optomechanical circuit on a chip. At the heart of this circuit is an optomechanical cavity, which in their case consists of a suspended nanoscale beam. Within the beam are a series of holes that act sort of like a hall of mirrors for light (photons). Photons of a very specific color or frequency bounce back and forth between these mirrors thousands of times before leaking out. At the same time, the nanoscale beam confines phonons, that is, mechanical vibrations, at a frequency of billions of cycles per second (gigahertz or GHz). The photons and phonons exchange energy so that vibrations of the beam influence the buildup of photons inside the cavity, while the buildup of photons inside the cavity influences the size of the mechanical vibrations. The strength of this mutual interaction, or coupling, is one of the largest reported for an optomechanical system.
One of the researchers’ main innovations came from joining these cavities with acoustic waveguides, which are components that route sound waves to specific locations. By channeling phonons into the optomechanical device, the group was able to manipulate the motion of the nanoscale beam directly. Because of the energy exchange, the phonons could change the properties of the light trapped in the device. To generate the sound waves, which were at GHz frequencies (much higher than audible sounds; not even your dog could hear them), they used piezoelectric materials, which deform when an electric field is applied to them and vice versa. By using a structure known as an “interdigitated transducer” (IDT), which enhances this piezoelectric effect, the group was able to establish a link between radio frequency electromagnetic waves and the acoustic waves. The strong optomechanical links enable them to optically detect this confined coherent acoustic energy down to the level of a fraction of a phonon.
They also observed controllable interference effects in sound waves by pitting electrically and optically generated phonons against each other. According to one of the paper’s co-authors, Kartik Srinivasan, the device might allow detailed studies of these interactions and the development of phononic circuitry that can be modified with photons.
“Future information processing systems may need to incorporate other information carriers, such as photons and phonons, in order to carry out different tasks in an optimal way,” says Srinivasan, a physicist at NIST’s Center for Nanoscale Science and Technology. “This work presents one platform for transducing information between such different carriers.”
Learn more: Multilingual Circuit: NIST’s “Optomechanical Transducer” Links Sound, Light and Radio Waves
The Latest on: Optomechanical transducer
[google_news title=”” keyword=”optomechanical transducer” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Optomechanical transducer
- Phoxonic Crystals: Manipulating Light and Sound at the Nanoscaleon April 19, 2024 at 1:27 pm
Phoxonic crystals harness the interaction between light and sound waves through optomechanical coupling. This coupling arises from the fact that light can exert pressure on mechanical structures, ...
- Optomechanical Crystals: Merging Light and Sound at the Nanoscaleon April 19, 2024 at 1:27 pm
Optomechanical crystals can be used as quantum interfaces between light and mechanical vibrations, enabling the transfer and manipulation of quantum information. They can serve as quantum transducers, ...
- Optomechanical device actuation through the optical gradient forceon April 15, 2024 at 5:00 pm
It was recently realized that the strong field gradient in the near-field of guided wave structures can also be exploited for actuating optomechanical devices, and initial theoretical work in this ...
- Optomechanical setup for 1st 'Suryatilak' of Ram Lallaon April 9, 2024 at 8:11 am
Experts from CBRI and Indian Institute of Astrophysics work on an optomechanical system for the 'Suryatilak' of Ram Lalla idol in Ayodhya on April 17, using a Fabry-Perot cavity with a movable ...
- Enhanced Optical Springs for More Powerful Gravitational Wave Detectionon April 8, 2024 at 7:21 am
The discovery of gravitational waves is among the greatest triumphs of contemporary science. The first detection of gravitational waves in 2017 resulted from the merger of a binary neutron star ...
- Kerr-enhanced optical spring for next-generation gravitational wave detectorson April 4, 2024 at 5:00 pm
This design involves generating intracavity signal amplification effect in a Fabry-Perot type optomechanical cavity by inserting a Kerr medium. The Kerr medium induces an optical Kerr effect in ...
- Getting to Know Transducers: Where Do You Mount One on a Pontoon Boat?on February 27, 2023 at 2:18 pm
Fish finding systems are critical for maritime fishers, and the transducer is what makes these devices work. To get the best results from a transducer, though, you need to put it in an optimal ...
- How To Mount A Transducer On An Aluminium Boaton February 13, 2023 at 2:18 am
And one reliable tool is a transducer. A transducer is an electronic sensing device that converts electrical energy into high-frequency sound with the help of a transmitter. Transducers produce sound ...
- ultrasonic transduceron November 26, 2021 at 3:59 pm
Not so, if you use a pair of specialised ultrasonic transducer arrays to move the air instead! (Video, embedded below) Three banks of thrusters provide a 180 degree steerable net force Details are ...
- Building An Ultrasonic Levitation Rigon February 2, 2021 at 3:41 am
The rig uses a 60W ultrasonic transducer, operating at approximately 40 KHz, to generate a standing wave in combination with a reflector – essentially a rigid piece of material off which sound ...
via Bing News