The spaghetti-like internal structure of most plastics makes it hard for them to cast away heat, but a University of Michigan research team has made a plastic blend that does so 10 times better than its conventional counterparts.
Plastics are inexpensive, lightweight and flexible, but because they restrict the flow of heat, their use is limited in technologies like computers, smartphones, cars or airplanes—places that could benefit from their properties but where heat dissipation is important. The new U-M work could lead to light, versatile, metal-replacement materials that make possible more powerful electronics or more efficient vehicles, among other applications.
The new material, which is actually a blend, results from one of the first attempts to engineer the flow of heat in an amorphous polymer. A polymer is a large molecule made of smaller repeating molecules. Plastics are common synthetic polymers.
Previous efforts to boost heat transfer in polymers have relied on metal or ceramic filler materials or stretching molecule chains into straight lines. Those approaches can be difficult to scale up and can increase a material’s weight and cost, make it more opaque, and affect how it conducts electricity and reflects light. The U-M material has none of those drawbacks, and it’s easy to manufacture with conventional methods, the researchers say.
“Researchers have paid a lot of attention to designing polymers that conduct electricity well for organic LEDs and solar cells, but engineering of thermal properties by molecular design has been largely neglected, even though there are many current and future polymer applications for which heat transfer is important,” said Kevin Pipe, U-M associate professor of mechanical engineering and corresponding author of a paper on the work published in the current issue of Nature Materials.
Pipe led the project with Jinsang Kim, another corresponding author and associate professor of materials science and engineering.
Heat energy travels through substances as molecular vibrations. For heat to efficiently move through a material, it needs continuous pathways of strongly bound atoms and molecules. Otherwise, it gets trapped, meaning the substance stays hot.
“The polymer chains in most plastics are like spaghetti,” Pipe said. “They’re long and don’t bind well to each other. When heat is applied to one end of the material, it causes the molecules there to vibrate, but these vibrations, which carry the heat, can’t move between the chains well because the chains are so loosely bound together.”
The Pipe and Kim research groups devised a way to strongly link long polymer chains of a plastic called polyacrylic acid (PAA) with short strands of another called polyacryloyl piperidine (PAP). The new blend relies on hydrogen bonds that are 10-to-100 times stronger than the forces that loosely hold together the long strands in most other plastics.
“We improved those connections so the heat energy can find continuous pathways through the material,” Kim said. “There’s still a long way to go, but this is a very important step we made to understand how to engineer plastics in this way. Ten times better is still a lot lower heat conductivity than metals, but we’ve opened the door to continue improving.”
The Latest on: Heat-conducting plastic
[google_news title=”” keyword=”Heat-conducting plastic” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Heat-conducting plastic
- Cold sintering may rescue plastic, ceramics, battery components from landfillson May 3, 2024 at 6:25 am
Recycling does not necessarily prevent an item from eventually ending up in a landfill, according to Enrique Gomez, interim associate dean for equity and inclusion and professor of chemical ...
- Plastic can silently enter our body with every breath we takeon May 2, 2024 at 10:30 am
Research shows inhaled plastic particles deposit in the respiratory system, affecting health based on size, shape, and breathing rate.
- Outdoor Action Guide toon April 30, 2024 at 5:00 pm
Conduction - through direct contact between objects ... Include an aluminum "space" blanket to help prevent radiant heat loss, and wrap the entire ensemble in plastic to protect from wind and water.
- Biodegradable ‘Living Plastic’ Houses Bacterial Spores That Help It Break Downon April 30, 2024 at 8:05 am
Although the researchers still need to study what gets left behind after the material degrades, they note that any lingering bacterial spores are likely harmless. Bacillus subtilis is a strain used in ...
- Dozens more arrested at UT-Austin as police use pepper spray, flash bangs to break up protestson April 29, 2024 at 8:59 pm
Arrests resumed Monday at the University of Texas at Austin amid ongoing demonstrations in support of Palestinians. Dozens of protesters gathered on campus where there was a sizable police presence, ...
- Marine unit found metal shavings in F-35 fuel, plastic tool in wingon April 29, 2024 at 1:00 pm
In a memo obtained by Defense News, a Marine Corps squadron commander raises the alarm about the quality of Lockheed Martin's new F-35C jets.
- Global plastic pollution treaty talks heat up in Canadaon April 22, 2024 at 4:59 pm
In March 2022, 175 nations agreed to make the first legally-binding treaty on plastics pollution, including in the oceans, by the end of 2024. It’s an extremely short timeline for negotiations ...
- Preventing thermal runaway at every level of EV battery assemblyon April 21, 2024 at 3:07 am
There is currently a lack of clear regulation around TRP standards. But across the industry, many OEMs have adopted the “5-minute rule” as the standard, meaning if a thermal runaway event happens, ...
- Cooler transformers could help electric gridon April 15, 2024 at 5:00 pm
"To accurately estimate temperatures, we used a fine-sized mesh based on finite element methods and modeled the conduction through the diffusion heat transfer equation -- the computational costs ...
- How to choose between black plastic and landscape fabric to eliminate weedson April 8, 2024 at 5:00 pm
This story was originally published in June 2020. Every gardener knows the feeling of being so frustrated with the weeds in your plot that you just want to smother them. Well, good news: You can.
via Bing News