Stanford scientists have developed a way to wirelessly deliver electricity to moving objects, technology that could one day charge electric vehicles and personal devices like medical implants and cell phones.
If electric cars could recharge while driving down a highway, it would virtually eliminate concerns about their range and lower their cost, perhaps making electricity the standard fuel for vehicles.
Now Stanford University scientists have overcome a major hurdle to such a future by wirelessly transmitting electricity to a nearby moving object. Their results are published in the June 15 edition of Nature.
“In addition to advancing the wireless charging of vehicles and personal devices like cellphones, our new technology may untether robotics in manufacturing, which also are on the move,” said Shanhui Fan, a professor of electrical engineering and senior author of the study. “We still need to significantly increase the amount of electricity being transferred to charge electric cars, but we may not need to push the distance too much more.”
The group built on existing technology developed in 2007 at MIT for transmitting electricity wirelessly over a distance of a few feet to a stationary object. In the new work, the team transmitted electricity wirelessly to a moving LED lightbulb. That demonstration only involved a 1-milliwatt charge, whereas electric cars often require tens of kilowatts to operate. The team is now working on greatly increasing the amount of electricity that can be transferred, and tweaking the system to extend the transfer distance and improve efficiency.
Driving range
Wireless charging would address a major drawback of plug-in electric cars – their limited driving range. Tesla Motors expects its upcoming Model 3 to go more than 200 miles on a single charge and the Chevy Bolt, which is already on the market, has an advertised range of 238 miles. But electric vehicle batteries generally take several hours to fully recharge. A charge-as-you-drive system would overcome these limitations.
“In theory, one could drive for an unlimited amount of time without having to stop to recharge,” Fan explained. “The hope is that you’ll be able to charge your electric car while you’re driving down the highway. A coil in the bottom of the vehicle could receive electricity from a series of coils connected to an electric current embedded in the road.”
Some transportation experts envision an automated highway system where driverless electric vehicles are wirelessly charged by solar power or other renewable energy sources. The goal would be to reduce accidents and dramatically improve the flow of traffic while lowering greenhouse gas emissions.
Wireless technology could also assist GPS navigation of driverless cars. GPS is accurate up to about 35 feet. For safety, autonomous cars need to be in the center of the lane where the transmitter coils would be embedded, providing very precise positioning for GPS satellites.
Magnetic resonance
Mid-range wireless power transfer, as developed at Stanford and other research universities, is based on magnetic resonance coupling. Just as major power plants generate alternating currents by rotating coils of wire between magnets, electricity moving through wires creates an oscillating magnetic field. This field also causes electrons in a nearby coil of wires to oscillate, thereby transferring power wirelessly. The transfer efficiency is further enhanced if both coils are tuned to the same magnetic resonance frequency and are positioned at the correct angle.
However, the continuous flow of electricity can only be maintained if some aspects of the circuits, such as the frequency, are manually tuned as the object moves. So, either the energy transmitting coil and receiver coil must remain nearly stationary, or the device must be tuned automatically and continuously – a significantly complex process.
To address the challenge, the Stanford team eliminated the radio-frequency source in the transmitter and replaced it with a commercially available voltage amplifier and feedback resistor. This system automatically figures out the right frequency for different distances without the need for human interference.
“Adding the amplifier and resistor allows power to be very efficiently transferred across most of the three-foot range and despite the changing orientation of the receiving coil,” said graduate student Sid Assawaworrarit, the study’s lead author. “This eliminates the need for automatic and continuous tuning of any aspect of the circuits.”
Assawaworrarit tested the approach by placing an LED bulb on the receiving coil. In a conventional setup without active tuning, LED brightness would diminish with distance. In the new setup, the brightness remained constant as the receiver moved away from the source by a distance of about three feet. Fan’s team recently filed a patent application for the latest advance.
The group used an off-the-shelf, general-purpose amplifier with a relatively low efficiency of about 10 percent. They say custom-made amplifiers can improve that efficiency to more than 90 percent.
“We can rethink how to deliver electricity not only to our cars, but to smaller devices on or in our bodies,” Fan said. “For anything that could benefit from dynamic, wireless charging, this is potentially very important.”
Learn more: Wireless charging of moving electric vehicles overcomes major hurdle in new Stanford research
The Latest on: Wirelessly transmitting electricity
[google_news title=”” keyword=”wirelessly transmitting electricity” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]- WiBotic unveils new high power wireless charging solutionon April 30, 2024 at 9:00 am
WiBotic unveiled a new, larger 1kW charger, expanding its portfolio to provide wireless charging for larger battery systems.
- Florence police investigating Monday night shootingon April 30, 2024 at 4:24 am
A Monday night shooting in Florence left a man hospitalized as authorities continue to investigate, authorities said. Officers responded to the 1100 block of June Lane after reports of a shooting.
- SpaceX's Starship could help this start-up beam clean energy from space. Here's how (video)on April 30, 2024 at 3:00 am
LONDON — SpaceX's Starship will be a game changer for space-based solar power generation and will make orbiting power plants not only affordable, but cheaper than many other methods of generating ...
- 2024 Honda Ridgeline Review: A Pickup Truck For Every Dayon April 29, 2024 at 2:30 am
The 2024 Honda Ridgeline is now available in four all-wheel drive trims including Sport, RTL, the new TrailSport and the Black Edition, with a starting price of $39,750 before destination and handling ...
- Wireless Electric Vehicle Charging Market Research Report Analysis, Future Innovations, Growth Elements, and Recent Development 2024 to 2032on April 28, 2024 at 7:29 pm
Report Ocean has recently unveiled its research findings on the “Wireless Electric Vehicle Charging Market” spanning from 2024 to 2032. This comprehensive report thoroughly analyzes the market ...
- Leading infrastructure to accelerate electric power intelligenceon April 28, 2024 at 3:29 pm
In the digital era, no single player can solve all pain points. Hierarchical decoupling, modularization, and converged innovation are indispensable. Open, digital and intelligent ecosystems must be ...
- Wireless EV Charging Is Coming: Here's How It Workson April 25, 2024 at 7:49 am
Ready to swap a bulky electric vehicle charging setup for a wireless mat? Automakers and companies like WiTricity are making it happen. Here's what you need to know.
- How a highway could power heavy-duty electric vehicleson April 24, 2024 at 3:04 am
On a small stretch of highway in Indiana, crews are retrofitting the road surface with a series of coils in the pavement that will turn one lane of the four-lane divided highway into an ...
- Silicon Labs unveils wireless SoCs for energy harvestingon April 23, 2024 at 7:40 am
Silicon Labs introduces its first and most energy-efficient wireless SoCs for developing energy-harvesting devices.
- This revolutionary invention is here: a wireless outlet that transmits power through a windowon April 23, 2024 at 3:53 am
Engineer Peter Bevelacqua, based in California, has unveiled a groundbreaking invention: the wireless Power Mole outlet designed to charge outdoor appliances using home power sources.
via Google News and Bing News