via University of Central Florida
The lightweight, supercapacitor-battery hybrid composite material provides power and is as strong as steel
Like the charged power suit worn by Black Panther of Marvel Comics, UCF researchers have advanced NASA technologies to develop a power suit for an electric car that is as strong as steel, lighter than aluminum and helps boosts the vehicle’s power capacity.
The suit is made of layered carbon composite material that works as an energy-storing supercapacitor-battery hybrid device due to its unique design at the nanoscale level.
The development appeared recently as the cover story in the journal Small and could have applications in a range of technologies that require lightweight sources of power, from electric vehicles to spacecraft, airplanes, drones, portable devices and wearable tech.
“Our idea is to use the body shells to store energy to supplement the power stored in batteries,” says study co-author Jayan Thomas, the team leader and a professor in UCF’s NanoScience Technology Center and Department of Materials Science and Engineering.
“The advantage is that this composite can reduce the weight of your car and increase the miles per charge,” he says. “It is as strong as or even stronger than steel but much lighter.”
The material, when used as a car body shell, could increase an electric car’s range by 25%, meaning a 200 miles per charge vehicle could go an extra 50 miles and reduce its overall weight.
As a supercapacitor, it also would boost an electric car’s power, giving it the extra push it needs to go from zero to 60 mph in 3 seconds.
“This application, as well as many others, could be on the horizon one day as the technology advances in its readiness level,” says Luke Roberson, study co-author and a senior principal investigator for research and development at NASA’s Kennedy Space Center.
These materials could be employed as frames for cube satellites, structures on off-world habitats, or even as part of futuristic eyewear, such as mixed and virtual reality headsets.
“There are lots of potential infusion points within the economy as well as for future space exploration,” Roberson says. “This is, in my mind, a huge advancement of the technology readiness level to get us to where we need to be for NASA mission infusion.”
On cars, the supercapacitor composite material would get its power through charging, like a battery, as well as when the car brakes, Thomas says.
“Its charge-discharge cycle life is 10 times longer than an electric car battery,” he says.
The materials used are also nontoxic and nonflammable, which is very important for passenger safety in case of an accident, he says.
“This is a huge improvement over past approaches that have suffered from issues with toxic material, flammable organic electrolytes, low life cycles or poor performance,” Thomas says.
Due to its unique design that uses multiple layers of carbon fiber, the material has significant impact and bending strength, essential for withstanding an auto collision, as well as significant tensile strength.
To construct the material, the researchers created positively and negatively charged carbon fiber layers, that when stacked and attached in an alternating pattern, create a strong, energy-storing composite.
Nanoscale graphene sheets attached on the carbon fiber layers allow for increased charge storing ability, while metal oxides deposited on attached electrodes enhance voltage and provide higher energy density. This provides the supercapacitor-battery hybrid with its unprecedented energy storage ability and charging life cycle, Thomas says.
Deepak Pandey, the study’s lead author and a doctoral student in Thomas’ lab, worked on forming, shaping and optimizing the composite, as well as developing the method to add metal oxides to the carbon graphene strips.
Study co-author Kowsik Sambath Kumar, a doctoral student in Thomas’ lab, developed a way to vertically align nanoscale graphene on carbon fiber electrodes.
Kumar says one of the most important developments from this supercapacitor composite is that it is lightweight.
“Now in electric cars, the battery is 30% to 40% of the weight,” he says. “With this energy storing composite we can get additional mileage without increasing the battery weight, further it reduces the vehicle weight, while maintaining high tensile, bending and impact strength. Whenever you decrease that weight, you can increase the range, so this has huge applications in electric cars and aviation.”
Pandey agrees and highlights its usefulness for the space sector.
“Making a cubic satellite out of this composite will make the satellite light in weight and will help to eliminate the heavy battery pack,” he says. “This could save thousands of dollars per launch. Further, free volume gained by removal of big batteries could help pack in more sensors and testing equipment, increasing the functionality of satellite,” Pandey says. “Supercapacitor-battery hybrid behavior is ideal for cubesats since it can charge in minutes when a satellite orbits over the solar-lit side of the Earth.
Roberson says the technology is currently at a technology readiness level of five, which means it has been tested in a relevant environment before moving to being tested in a real environment, such as on a space flight, which would be level six testing.
To pass the last level of testing, level nine, and reach the commercial environment, it will require further development and testing focused on commercial applications, he says.
Original Article: UCF and NASA Researchers Design Charged ‘Power Suits’ for Electric Vehicles and Spacecraft
More from: University of Central Florida
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Supercapacitor-battery hybrid
- EU project HyFlow: Efficient, sustainable and cost-effective hybrid energy storage system for modern power grids
Over three years of research, the consortium of the EU project HyFlow has successfully developed a highly efficient, sustainable, and cost-effective hybrid energy storage system (HESS) that can meet ...
- Sodium-ion battery could charge in several seconds
Researchers at the Korea Advanced Institute of Science and Technology (KAIST) have identified a high-energy, high-power hybrid sodium-ion battery capable of charging in just a few seconds. The system ...
- Charges in seconds: Breakthrough with sodium battery
According to Korean researchers, they have achieved a "breakthrough" in charging sodium batteries. They were able to charge and discharge them in ...
- Plug-in hybrid Audi Q7 and Q8 get fresh update
The plug-in hybrid iterations of the Audi Q7 and Q8 get increased battery capacities alongside fresh new equipment in this latest update.
- Forget Long Drives on Electric! This Mercedes Hybrid Prioritizes Power
Forget long electric drives! This high-performance Mercedes hybrid, the mouthful-of-a-name Mercedes-AMG GT63 S E Performance Coupe, is built for speed, not electric range. Its tiny 9-mile electric ...
Go deeper with Google Headlines on:
Supercapacitor-battery hybrid
[google_news title=”” keyword=”supercapacitor-battery hybrid” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Supercapacitor composite material
- Unlocking the functional potential of mesoporous materials through modular nanocrystal assembly
(Nanowerk Spotlight) Mesoporous materials have emerged as a frontier of materials ... to step-change improvements in the performance of next-generation batteries and supercapacitors. It's important to ...
- Carbon Nanotubes Market Size, Opportunities, Share, Growth, Regional Trends, Key Segments, Graph and Forecast to 2028
Carbon Nanotubes Market by Type (Single Walled & Multi Walled), End Use Industry (Electronics & Semiconductors, Chemical Materials & Polymers, Structural Composites, Energy & Storage, Medical), Method ...
- Lightweight, Flexible Battery Paves the Way for Advanced Wearables
In a recent study published in Advanced Energy Materials, researchers from the Korea Institute of Science and Technology have developed a fiber-like electrode material using modified carbon nanotube ...
- Versatile fibers offer improved energy storage capacity for wearable devices
The latest wearable devices, such as Samsung's Galaxy Ring and Apple's Vision Pro, are taking health care a step further and even enabling people to work virtually. Given the characteristics of ...
- TPU scientists have created a promising composite for flexible electronics from oil waste
Scientists of the TPU Research School of Chemistry & Applied Biomedical Sciences have synthesized a carbon-polymer composite based on asphaltenes - by-products of oil refining. The new material has ...
Go deeper with Google Headlines on:
Supercapacitor composite material
[google_news title=”” keyword=”supercapacitor composite material” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]