Unprecedented fill factors of 80 percent come close to that of silicon solar cells
Energy consumption is growing rapidly in the 21st century, with rising energy costs and sustainability issues greatly impacting the quality of human life. Harvesting energy directly from sunlight to generate electricity using photovoltaic technologies is considered to be one of the most promising opportunities to produce electricity in an environmentally benign fashion.
Among the various photovoltaic technologies, polymer (plastic) solar cells offer unique attractions and opportunities. These solar cells contain Earth-abundant and environmentally benign materials, can be made flexible and lightweight, and can be fabricated using roll-to-roll technologies similar to how newspapers are printed. But the challenge has been improving the cells’ power-conversion efficiency.
Now a research team of faculty members and students led by Professor Tobin J. Marks of Northwestern University reports the design and synthesis of new polymer semiconductors and reports the realization of polymer solar cells with fill factors of 80 percent — a first. This number is close to that of silicon solar cells.
“Our results indicate that the power-conversion efficiency achievable with polymer solar cells may be far beyond the current levels, heralding a bright future for this technology,” Marks said. “With our high fill factors, polymers with very good but not champion light absorption still are able to achieve very good efficiency.”
Marks is the Vladimir N. Ipatieff Research Professor of Chemistry in the Weinberg College of Arts and Sciences and Professor of Materials Science and Engineering in the McCormick School of Engineering and Applied Science.
The study was published Aug. 11 by the journal Nature Photonics.
The team showed that the exceptional fill factors arise from high levels of order in the mixture of polymer donor chains and buckyball acceptor components, the way these two components are distributed within the cell active layer, and a “face-on” orientation of the polymer chains on the electrode surface.
The fill factor achieved is more than 10 percent greater than previously achieved by the polymer solar cell community, and, in the present study, although the polymer semiconductors have non-optimal light absorption characteristics, a near-record power-conversion efficiency as high as 8.7 percent is still obtained.
The working principle of polymer solar cells differs greatly from that of traditional silicon solar cells. The active layers of polymer solar cells typically contain a mixture of polymer chains that can donate electrons and “buckyball” molecules that accept electrons. (Buckminsterfullerene, or buckyball, is a spherical fullerene molecule with the formula C60.)
Under solar irradiation, electronic excitation generates mobile electron-hole pairs called excitons. The excitons then diffuse through the active layer of the cell, separating at donor-acceptor interfaces into free charge carriers (electrons and holes) that are collected as electrical current when they reach the cell electrodes.
In spite of the attractions of polymer solar cells, their large-scale application has been limited by the relatively low power-conversion efficiency, which is defined as the percentage of the power generated by the cell versus the power of the incident sunlight. The power produced by a solar cell is the product of three cell performance parameters: the open circuit voltage, the short circuit current and the fill factor. Various strategies now are being developed to increase these parameters to maximize the power-conversion efficiency of the cells.
While there are reliable approaches to increase the cell’s open circuit voltage and short circuit current, the realization of high fill factors has proven elusive, with fill factors of most polymer solar cells typically well below 70 percent, versus 80 percent for conventional silicon solar cells.
In polymer solar cells, achieving high fill factors is largely prevented by the recombination (self-annihilation) of the photogenerated electron-hole pairs before they reach the cell electrodes to be collected as current. In typical polymer solar cells, the randomly distributed donor and acceptor components lead to formation of disordered domains and isolated islands, as well as energy-wasting contacts with the electrodes. Such disordered structures combined with low mobilities of holes and electrons in such materials means that many recombine before they can be swept to the electrodes for collection.
Decoding and implementing design principles that produce high fill factors thus represents a significant advance in polymer solar cell technology.
The Latest Bing News on:
Plastic Solar Cells
- Sustainability at sea: Sunreef is integrating recycled plastic bottles into solar electric yachtson May 13, 2024 at 8:38 am
Sunreef Yachts is already a solar electric boatbuilder recognized for its sustainability efforts in the maritime industry but is ...
- Are Coolers Dead? Portable Refrigerators Elevate Vanlife and Overlandingon May 13, 2024 at 8:15 am
When packing for a camping trip in the old days, you’d load the cooler, fill it with ice, and head out for adventure. After a hard day of recreating, you’re hungry, thirsty, and ready to tuck into a ...
- Can You Use Your Mortgage to Buy Solar Panels?on May 13, 2024 at 7:40 am
There are many benefits of installing solar panels when you buy a home, from reducing your carbon footprint to boosting your new home's value. But because installing a rooftop array can cost $18,000 ...
- US discussed 'overcapacity' in Chinese solar manufacturing, coal in climate talkson May 10, 2024 at 12:13 pm
The United States and China discussed Chinese overcapacity in solar and battery manufacturing, steel production and coal power during two days of bilateral meetings on climate change, senior State ...
- Femtosecond laser welding boosts solar cell recyclingon May 9, 2024 at 11:00 pm
Researchers at NREL in the US have used a femtosecond laser to form glass-to-glass welds to make solar panels easier to recycle.
- Best Solar Panels For Homes Of 2024on May 9, 2024 at 12:46 pm
Commissions do not affect our editors' opinions or evaluations. Solar panels and their accessories unlock the boundless energy from sunshine and transform it into useful energy at home.
- Swedish startup wins EU funding to print organic indoor solar panelson May 7, 2024 at 7:55 am
Epishine's organic solar panels harness indoor light to power electronics and Internet of Things (IoT) devices.
- Path to easier recycling of solar moduleson May 3, 2024 at 10:18 am
The use of femtosecond lasers to form glass-to-glass welds for solar modules would make the panels easier to recycle, according to a proof-of-concept study.
- New tech to demetallize, recrystallize solar cells from end-of-life PV moduleson May 3, 2024 at 5:06 am
An international team of researchers has proposed a series of processes to recover silicon and other metals from recycled solar cells. Their goal is to reuse the recovered silicon in the PV supply ...
- New welding technology makes solar panels easy to recycleon May 2, 2024 at 6:06 am
US-based researchers found that the use of femtosecond lasers to form glass-to-glass welds for solar modules would make the panels easier to recycle.
The Latest Google Headlines on:
Plastic Solar Cells
[google_news title=”” keyword=”Plastic Solar Cells” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
Polymer solar cells
- Researchers develop perovskite solar cells for energy-autonomous drone operationon May 10, 2024 at 4:58 am
Inspection drones, for example, should remain in the air for as long as possible. Perovskite solar modules could be the key for a solution.
- Femtosecond laser welding boosts solar cell recyclingon May 9, 2024 at 11:00 pm
Researchers at NREL in the US have used a femtosecond laser to form glass-to-glass welds to make solar panels easier to recycle.
- Path to easier recycling of solar moduleson May 3, 2024 at 10:18 am
The use of femtosecond lasers to form glass-to-glass welds for solar modules would make the panels easier to recycle, according to a proof-of-concept study.
- New welding technology makes solar panels easy to recycleon May 2, 2024 at 6:06 am
US-based researchers found that the use of femtosecond lasers to form glass-to-glass welds for solar modules would make the panels easier to recycle.
- Solar cells articles from across Nature Portfolioon April 25, 2024 at 5:00 pm
Solar cells are devices for converting sunlight into electricity. Their primary element is often a semiconductor which absorbs light to produce carriers of electrical charge. An applied electric ...
- Engineers uncover key to efficient and stable organic solar cellson April 25, 2024 at 7:56 am
A team of researchers led by Professor Philip C.Y. Chow from the Department of Mechanical Engineering at the University of Hong Kong (HKU) has made a significant breakthrough in the field of organic ...
- Key to efficient and stable organic solar cellson April 24, 2024 at 5:00 pm
A team of researchers has made a significant breakthrough in the field of organic photovoltaics. A team of researchers led by Professor Philip C.Y. Chow from the Department of Mechanical ...
- Noah Lee explores polymer solar cells in his projecton March 17, 2024 at 5:00 pm
Former Supreme Court Justice Stephen Breyer sounds off on Dobbs decision: 'Too many questions' General sent home in disgrace from Afghanistan after drinking champagne 9 Chickweed Lane by Brooke ...
- How Are Solar Panels Made? (2024)on July 17, 2023 at 3:21 pm
The final assembly includes covering the panel with a frontal tempered glass sheet and polymer backsheet. As previously mentioned, solar panels use an array of PV sheets encapsulated by polymer ...
- How To Clean Solar Panels (2024 Guide)on June 16, 2023 at 10:50 am
The back of a solar panel is covered with a backsheet, typically made of a durable polymer. The back surface also contains a junction box with electrical terminals used to wire multiple panels ...
The Latest Google Headlines on:
Polymer solar cells
[google_news title=”” keyword=”polymer solar cells” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]