New material created at Rice University with graphene oxide flakes
Large flakes of graphene oxide are the essential ingredient in a new recipe for robust carbon fiber created at Rice University.
The fiber spun at Rice is unique for the strength of its knots. Most fibers are most likely to snap under tension at the knot, but Rice’s fiber demonstrates what the researchers refer to as “100 percent knot efficiency,” where the fiber is as likely to break anywhere along its length as at the knot.
The material could be used to increase the strength of many products that use carbon fiber, like composites for strong, light aircraft or fabrics for bulletproof apparel, according to the researchers.
“To see this is very strange,” Tour said. “The knot is as strong as any other part of the fiber. That never happens in a carbon fiber or polymer fibers.”
Credit goes to the unique properties of graphene oxide flakes created in an environmentally friendly process patented by Rice a few years ago. The flakes that are chemically extracted from graphite seem small. They have an average diameter of 22 microns, a quarter the width of an average human hair. But they’re massive compared with the petroleum-based pitch used in current carbon fiber. “The pitch particles are two nanometers in size, which makes our flakes about ten thousand times larger,” said Rice graduate student Changsheng Xiang, lead author of the new paper.
Like with pitch, the weak van der Waals forceholds the graphene flakes together. Unlike pitch, the atom-thick flakes have an enormous surface area and cling to each other like the scales on a fish when pulled into a fiber. The wet-spinning process is similar to one recently used to createhighly conductive fibers made of nanotubes, but in this case Xiang just used water as the solvent rather than a super acid.
Bendability at the knot is due to the fiber’s bending modulus, which is a measure of its flexibility, Xiang said. “Because graphene oxide has very low bending modulus, it thinks there’s no knot there,” he said.
Tour said industrial carbon fibers — a source of steel-like strength in ultralight materials ranging from baseball bats to bicycles to bombers — haven’t improved much in decades because the chemistry involved is approaching its limits. But the new carbon fibers spun at room temperature at Rice already show impressive tensile strength and modulus and have the potential to be even stronger when annealed at higher temperatures.
Heating the fibers to about 2,100 degrees Celsius, the industry standard for making carbon fiber, will likely eliminate the knotting strength, Xiang said, but should greatly improve the material’s tensile strength, which will be good for making novel composite materials.
The Latest Bing News on:
Carbon fiber
- Why is carbon fiber so expensive? Revelations about this much-misunderstood materialon May 10, 2024 at 10:43 am
Why do carbon fiber bikes cost so much? What's this material really made of and can a repaired frame ever be judged safe? We lift the lid on carbon fiber and question its sustainability ...
- Review: Pure Precision Carbon Ascenton May 10, 2024 at 10:02 am
The Carbon Ascent is accurate enough for target-style, ragged-hole groups, light enough to barely notice on a long hike and still packs enough punch to make the post-shot walk to your quarry very ...
- The best carbon plate running shoes 2024on May 10, 2024 at 2:21 am
Investing in a set of the best carbon plate running shoes can help boost your speed, especially on race day. These shoes are designed to return more energy during your run, making them ideal for ...
- Mido Introduces The Limited Carbon Edition Of Its Versatile Ocean Star 200Con May 7, 2024 at 2:00 am
Mido introduces the carbon fiber Ocean Star 200C ✓ A limited edition of 888 pieces with a COSC-certified movement ✓ Check it out! ✓ ...
- The First Pagani Utopia In The US Is Carbon Fiber Arton May 7, 2024 at 12:12 am
First Pagani Utopia arrives in the US. Unique carbon fiber body paired with nine-spoke silver wheels, burgundy striping, and gold calipers. Tan leather accents.
- All-Carbon Pagani Utopia Is The First Delivered In U.S.on May 6, 2024 at 11:05 am
The first Pagani Utopia in the U.S. has just been delivered and joins an enviable collection that also includes a Koenigsegg Regera, Bugatti Chiron, McLaren P1, Ferrari LaFerrari, and a Pagani Huayra ...
- 2025 Cadillac CT4-V Blackwing Carbon Fiber Packages Get Price Increaseon May 6, 2024 at 10:54 am
Both of the two carbon fiber appearance packages for the 2025 Cadillac CT4-V Blackwing got a price increase for the model year, alongside an overall MSRP hike.
- Novo Helix T50 Carbon Fiber Tripod Kit reviewon May 4, 2024 at 10:36 am
Construction: 10-layer carbon fiber 'Superweave' Leg sections: 5 Center column sections: 2 Max tripod payload: 20kg Tripod feet: Rubber pads & metal spikes Head payload: 8kg Arca Swiss compatible: Yes ...
- Chevrolet Corvette Z06 Owners Complain Of Mismatched Carbon Fiber Trimon May 1, 2024 at 4:40 pm
Some Corvette Z06 owners received vehicles with mismatched carbon fiber trim. The issue was acknowledged by Chevy and a technical service bulletin was issued. Owners will have to wait for correct ...
- Affordable lightweight city ebike goes all in on carbonon April 30, 2024 at 6:53 am
Carbon-framed ebikes can cost a pretty penny, but the latest lightweight city model from Fiido currently comes in at well under $2k, has the stealthy look of a regular bike and boasts a ...
The Latest Google Headlines on:
Carbon fiber
[google_news title=”” keyword=”carbon fiber” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
Novel composite materials
- Assam: IITG develops high-performance materials for supercapacitorson May 11, 2024 at 1:30 am
Researchers from IIT Guwahati have developed novel materials and methodologies that enhance the performance metrics of supercapacitors.
- IIT-G develops high-performance materials for supercapacitorson May 10, 2024 at 6:56 am
Researchers from Indian Institute of Technology-Guwahati (IIT-G) have developed novel materials and methodology that significantly enhances the performance metrics of supercapacitors. Led by Uday ...
- Revolutionizing Photonics: 2D Materials Manipulate Light With Remarkable Precisionon May 4, 2024 at 3:37 pm
NYU Abu Dhabi researchers have unveiled a novel 2D material improving optical modulation for advanced systems and communications. Responding to the increasing demand for efficient, tunable optical mat ...
- Titan sub disaster may have been caused by ‘micro-buckling’, says engineeron May 3, 2024 at 11:13 pm
A civil engineer has proposed that the fatal implosion of the Titan submersible last year may have been caused by "micro-buckling" in its carbon fibre hull.
- The Novel Material Revolutionizing Energy Storageon April 28, 2024 at 10:00 am
Washington University in St. Louis scientists have developed a novel material that supercharges innovation in electrostatic energy storage, with the potential to revolutionize electronic devices.
- Novel Anode Material Boosts Lithium-Ion Battery Performanceon April 25, 2024 at 7:36 am
By utilizing their knowledge of nanocarbon materials, KERI has created novel functionalization and ... KERI has shown that batteries made with its composite anode materials continue to function ...
- New 2D material manipulates light with remarkable precision and minimal losson April 21, 2024 at 5:00 pm
More information: Ghada Dushaq et al, Electro-optic tuning in composite silicon photonics based on ferroionic 2D materials, Light: Science & Applications (2024). DOI: 10.1038/s41377-024-01432-2 ...
- A novel machine learning model for the characterization of material surfaceson April 11, 2024 at 5:00 pm
A novel machine learning model for the characterization of material surfaces. ScienceDaily . Retrieved May 3, 2024 from www.sciencedaily.com / releases / 2024 / 04 / 240412113453.htm ...
- Scientists develop composite accelerometer for extreme environmentson April 7, 2024 at 5:00 pm
In response, scientists have crafted an accelerometer using a novel silicon carbide-carbon ... accelerometer based on a SiC-CNT composite material, Microsystems & Nanoengineering (2024).
- Metal-Organic Frameworkson March 25, 2024 at 5:00 pm
Integration of MOFs with different functional materials, such as graphene and polymers, has led to the development of novel composite materials with superior functionalities. Recent research has ...
The Latest Google Headlines on:
Novel composite materials
[google_news title=”” keyword=”novel composite materials” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]