A line grating fabricated with SCRIBE to form the UIUC “I” logo with accurate colors. The left grating was fabricated without the improvements, and the right grating incorporates the improvements.
CREDIT: The Grainger College of Engineering at the University of Illinois Urbana-Champaign
3D printers form objects by layering melted plastic or metal, but this only works on large scales. What you need to fabricate microdevices for which the layering step is not feasible? What if it were possible to print directly into the bulk of an existing three-dimensional material?
The research groups of Lynford Goddard and Paul Braun, professors at the University of Illinois Urbana-Champaign, have been collaborating to develop such a process. They use the technique of multiphoton lithography to print inside an existing porous material with high intensity laser light. This allows the researchers to selectively modify regions of the interior and manufacture custom small-scale optical devices in a procedure called subsurface controllable refractive index via beam exposure, or SCRIBE. The two research groups recently announced a refinement to this procedure that gives them significantly tighter control over the resulting devices. The new procedure was recently published in ACS Photonics.
“We were able to show an improvement from a baseline of 36% to a new value of 49% in the efficiency of fabricated lenses and a clear improvement in the color uniformity resulting from the 2D line gratings we made,” said Alexander Littlefield, a graduate student in Goddard’s group and the study’s lead author. “We believe that this new technique will open the door to a vast array of optical element designs.”
SCRIBE is a form of multiphoton lithography that depends on a mechanism called two-photon absorption. The researchers use silicon that has been etched to have microscopic pores and oxidized into transparent silica. They then fill it with a material called photoresist, which can undergo a chemical process by which it changes its optical properties only when it absorbs two photons simultaneously—a process that is quite rare unless very intense light is used. The researchers take advantage of this by focusing laser light to create high intensities only in specific regions. This allows them to create custom designs for the material’s optical properties in three dimensions to “write” optical components.
Past versions of SCRIBE were limited by imperfect control of the laser’s intensity. To address this, the researchers present three improvements to the technique in their article. First, they use a two-photon fluorescence imaging system to map the photoresist’s density and correct the laser power needed for the desired result. Second, they smooth out errors that are especially prominent near the writing boundary by modulating the material’s position as the laser writes. Finally, they introduce a time delay between laser exposures to minimize time-dependent effects in the photoresist interaction.
By incorporating these three improvements, the researchers achieved tighter control over their patterned devices, achieving more precisely fabricated components that are much more effective. To demonstrate the versatility of their method, they fabricated a 100-by-100-micrometer optical device that alters light to form specific color patterns, a line grating, that reproduces the shape and colors of the UIUC logo (see figure).
“Our work shows that multiphoton lithography can now accurately fabricate microscale optical components with new capabilities that do not yet exist for other fabrication methods,” Goddard said.
Original Article: New procedure allows micro-printing inside existing materials with greater accuracy
More from: University of Illinois at Urbana Champaign
The Latest Updates from Bing News
Go deeper with Bing News on:
Multiphoton lithography
- electron-beam lithography
One of the most complex parts of this process is lithography: the step in which shapes are drawn onto a silicon wafer. There are several ways to do this, all of them rather complicated ...
- Intel completes assembly of world’s most advanced EUV lithography system
High NA EUV lithography is widely seen as the next evolution of EUV lithography, a technology used in the semiconductor industry for manufacturing integrated circuits. EUV is a type of ...
- DF-SCOPE™ - Multiphoton Conversion for Olympus BX51WI from Sutter Instrument
The DF-Scope™ is a customer-inspired, multiphoton, imaging package for the ubiquitous BX51WI upright microscope. Many laboratories already have BX51WI microscopes for use in electrophysiology ...
- Old crystal, new story for enhancing deep ultraviolet laser performance
In the realm of science and technology, harnessing coherent light sources in the deep ultraviolet (DUV) region holds immense significance across various applications such as lithography ...
- Colloidal Lithography: A Versatile Technique for Nanoscale Patterning
Colloidal lithography is a nanofabrication technique that utilizes colloidal particles as masks for creating ordered nanostructures on substrates. This cost-effective and scalable method has gained ...
Go deeper with Bing News on:
Microscale optical components
- Physicists create optical component for 6G
A joint team of physicists from Skoltech, MIPT, and ITMO developed an optical component that helps manage the properties of a terahertz beam and split it into several channels. The new device can be ...
- Glass sensors 1,000x smaller than sand grain, 3D-printed on optical fiber
Marking a significant advancement in communications, Swedish researchers 3D-printed silica glass micro-optics on the ...
- Researchers harness blurred light to 3D-print high-quality optical components
Researchers developed a new 3D printing method called blurred tomography that can rapidly produce microlenses with commercial-level optical quality. They used the technique to print a microlens ...
- Researchers harness blurred light to 3D print high quality optical components
"We purposely added optical blurring to the beams of light used for this 3D printing method to manufacture precision optical components," said Daniel Webber from the National Research Council of ...
- Basic structure of optical microcavities: Fabry-Perot microcavities and whispering gallery mode microcavities (IMAGE)
Optical microcavities with compact structures can trap resonant photons within microscale confines for extended resonant durations, significantly bolster light-matter interactions and have become ...