The lab-based prototype lidar system that the research team built, which successfully captured megapixel-resolution depth maps using a commercially available digital camera.
(Image credit: Andrew Brodhead)
Standard image sensors, like the billion or so already installed in practically every smartphone in use today, capture light intensity and color. Relying on common, off-the-shelf sensor technology – known as CMOS – these cameras have grown smaller and more powerful by the year and now offer tens-of-megapixels resolution. But they’ve still seen in only two dimensions, capturing images that are flat, like a drawing – until now.
Researchers at Stanford University have created a new approach that allows standard image sensors to see light in three dimensions. That is, these common cameras could soon be used to measure the distance to objects.
The engineering possibilities are dramatic. Measuring distance between objects with light is currently possible only with specialized and expensive lidar – short for “light detection and ranging” – systems. If you’ve seen a self-driving car tooling around, you can spot it right off by the hunchback of technology mounted to the roof. Most of that gear is the car’s lidar crash-avoidance system, which uses lasers to determine distances between objects.
Lidar is like radar, but with light instead of radio waves. By beaming a laser at objects and measuring the light that bounces back, it can tell how far away an object is, how fast it’s traveling, whether it’s moving closer or farther away and, most critically, it can calculate whether the paths of two moving objects will intersect at some point in the future.
“Existing lidar systems are big and bulky, but someday, if you want lidar capabilities in millions of autonomous drones or in lightweight robotic vehicles, you’re going to want them to be very small, very energy efficient, and offering high performance,” explains Okan Atalar, a doctoral candidate in electrical engineering at Stanford and the first author on the new paper in the journal Nature Communications that introduces this compact, energy-efficient device that can be used for lidar.
For engineers, the advance offers two intriguing opportunities. First, it could enable megapixel-resolution lidar – a threshold not possible today. Higher resolution would allow lidar to identify targets at greater range. An autonomous car, for example, might be able to distinguish a cyclist from a pedestrian from farther away – sooner, that is – and allow the car to more easily avoid an accident. Second, any image sensor available today, including the billions in smartphones now, could capture rich 3D images with minimal hardware additions.
Changing how machines see
One approach to adding 3D imaging to standard sensors is achieved by adding a light source (easily done) and a modulator (not so easily done) that turns the light on and off very quickly, millions of times every second. In measuring the variations in the light, engineers can calculate distance. Existing modulators can do it, too, but they require relatively large amounts of power. So large, in fact, that it makes them entirely impractical for everyday use.
The solution that the Stanford team, a collaboration between the Laboratory for Integrated Nano-Quantum Systems (LINQS) and ArbabianLab, came up with relies on a phenomenon known as acoustic resonance. The team built a simple acoustic modulator using a thin wafer of lithium niobate – a transparent crystal that is highly desirable for its electrical, acoustic and optical properties – coated with two transparent electrodes.
Critically, lithium niobate is piezoelectric. That is, when electricity is introduced through the electrodes, the crystal lattice at the heart of its atomic structure changes shape. It vibrates at very high, very predictable and very controllable frequencies. And, when it vibrates, lithium niobate strongly modulates light – with the addition of a couple polarizers, this new modulator effectively turns light on and off several million times a second.
“What’s more, the geometry of the wafers and the electrodes defines the frequency of light modulation, so we can fine-tune the frequency,” Atalar says. “Change the geometry and you change the frequency of modulation.”
In technical terms, the piezoelectric effect is creating an acoustic wave through the crystal that rotates the polarization of light in desirable, tunable and usable ways. It is this key technical departure that enabled the team’s success. Then a polarizing filter is carefully placed after the modulator that converts this rotation into intensity modulation – making the light brighter and darker – effectively turning the light on and off millions of times a second.
“While there are other ways to turn the light on and off,” Atalar says, “this acoustic approach is preferable because it is extremely energy efficient.”
Practical outcomes
Best of all, the modulator’s design is simple and integrates into a proposed system that uses off-the-shelf cameras, like those found in everyday cellphones and digital SLRs. Atalar and advisor Amin Arbabian, associate professor of electrical engineering and the project’s senior author, think it could become the basis for a new type of compact, low-cost, energy-efficient lidar – “standard CMOS lidar,” as they call it – that could find its way into drones, extraterrestrial rovers and other applications.
The impact for the proposed modulator is enormous; it has the potential to add the missing 3D dimension to any image sensor, they say. To prove it, the team built a prototype lidar system on a lab bench that used a commercially available digital camera as a receptor. The authors report that their prototype captured megapixel-resolution depth maps, while requiring small amounts of power to operate the optical modulator.
Better yet, with additional refinements, Atalar says the team has since further reduced the energy consumption by at least 10 times the already-low threshold reported in the paper, and they believe several-hundred-times-greater energy reduction is within reach. If that happens, a future of small-scale lidar with standard image sensors – and 3D smartphone cameras – could become a reality.
Original Article: Stanford engineers enable simple cameras to see in 3D
More from: Stanford University
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Megapixel-resolution lidar
- Apple iPad Pro M4 vs. iPad Air M2: Reviewing which is right for most
Apple iPad Pro M4 and iPad M2 review comparison. Does OLED and a new chip justify the $500 premium for the new Pro?
- Horizontal resolution affects model aerosol properties, finds Earth system model research
Earth system models are running at higher resolutions. Yet parameterizations designed to represent aerosol lifecycles and their interactions with clouds and radiation in the Energy Exascale Earth ...
- Apple iPad Pro (2024): Everything you need to know
Apple announced the “all-new” iPad Pro with OLED during a virtual event. The biggest change with this new generation of iPad Pro is how thin it is, as well as the OLED displays, which Apple is calling ...
- New iPad Pros are the thinnest Apple device ever, feature dual-OLED screens
Apple's newest iPad Pro, available TK, puts an M TK chip inside a thinner frame available in new 11-inch and 13-inch and sizes, while also upgrading the screens on both to two "tandem" OLED displays ...
- How Many Megapixels Do You Really Need?
So, before you go ahead and spend lots of money on the highest resolution sensor you can find, you’ll want to read this guide to find out how many megapixels you really need. Why you can trust ...
Go deeper with Google Headlines on:
Megapixel-resolution lidar
[google_news title=”” keyword=”megapixel-resolution lidar” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Small-scale lidar
- Lidar maker Hesai sues US government, denies alleged link to China's military
China-based Hesai Group sued the U.S. government on Monday for adding the maker of lidar light sensors to a list of companies allegedly working with Beijing's military.
- INVZ Innoviz Technologies Ltd.
Innoviz Technologies Ltd. manufactures and sells automotive grade LiDAR sensors and perception software to enable safe autonomous driving at a mass scale. The company offers InnovizOne, a solid ...
- MicroVision, Inc. (NASDAQ:MVIS) Q1 2024 Earnings Call Transcript
Q1 2024 Earnings Call Transcript May 9, 2024 MicroVision, Inc. isn’t one of the 30 most popular stocks among hedge funds at the end of the third quarter (see the details here). Operator: Good ...
- Ouster: A Best-In-Class LIDAR Company
Ouster appears to have a clear path to profitability, is deeply undervalued, and has a decade of growth possible. Find out why OUST stock is a 'Strong Buy.' ...
- Tesla is Luminar's largest lidar customer
Tesla CEO Elon Musk has said that lidar sensors are a "crutch" for autonomous vehicles. Tesla accounted for "more than 10%" of Luminar's revenue in the first quarter of 2024, or a little more than $2 ...
Go deeper with Google Headlines on:
Small-scale lidar
[google_news title=”” keyword=”nano factory” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]