While microneedle patches have been studied for decades, the work by Carolina and Stanford overcomes some past challenges: through 3D printing, the microneedles can be easily customized to develop various vaccine patches for flu, measles, hepatitis or COVID-19 vaccines.
Researchers from Carolina and Stanford University have developed a microneedle vaccine patch that outperforms needle jab to boost immunity.
Scientists at Stanford University and the University of North Carolina at Chapel Hill have created a 3D-printed vaccine patch that provides greater protection than a typical vaccine shot.
The trick is applying the vaccine patch directly to the skin, which is full of immune cells that vaccines target.
The resulting immune response from the vaccine patch was 10 times greater than a vaccine delivered into an arm muscle with a needle jab, according to a study conducted in animals and published by the team of scientists in the Proceedings of the National Academy of Sciences.
Considered a breakthrough are the 3D-printed microneedles lined up on a polymer patch and barely long enough to reach the skin to deliver vaccine.
“In developing this technology, we hope to set the foundation for even more rapid global development of vaccines, at lower doses, in a pain- and anxiety-free manner,” said lead study author and entrepreneur in 3D print technology Joseph M. DeSimone, professor of translational medicine and chemical engineering at Stanford University and professor emeritus at UNC-Chapel Hill.
The ease and effectiveness of a vaccine patch sets the course for a new way to deliver vaccines that are painless, less invasive than a shot with a needle and can be self-administered.
Study results show the vaccine patch generated a significant T-cell and antigen-specific antibody response that was 50 times greater than a subcutaneous injection delivered under the skin
That heightened immune response could lead to dose sparing, with a microneedle vaccine patch using a smaller dose to generate a similar immune response as a vaccine delivered with a needle and syringe.
While microneedle patches have been studied for decades, the work by Carolina and Stanford overcomes some past challenges: through 3D printing, the microneedles can be easily customized to develop various vaccine patches for flu, measles, hepatitis or COVID-19 vaccines.
Advantages of the vaccine patch
The COVID-19 pandemic has been a stark reminder of the difference made with timely vaccination. But getting a vaccine typically requires a visit to a clinic or hospital.
There a health care provider obtains a vaccine from a refrigerator or freezer, fills a syringe with the liquid vaccine formulation and injects it into the arm.
Although this process seems simple, there are issues that can hinder mass vaccination – from cold storage of vaccines to needing trained professionals who can give the shots.
Meanwhile, vaccine patches, which incorporate vaccine-coated microneedles that dissolve into the skin, could be shipped anywhere in the world without special handling and people can apply the patch themselves.
Moreover, the ease of using a vaccine patch may lead to higher vaccination rates.
How the patches are made
It’s generally a challenge to adapt microneedles to different vaccine types, said lead study author Shaomin Tian, a researcher in the Department of Microbiology and Immunology in the UNC School of Medicine.
“These issues, coupled with manufacturing challenges, have arguably held back the field of microneedles for vaccine delivery,” she said.
Most microneedle vaccines are fabricated with master templates to make molds. However, the molding of microneedles is not very versatile, and drawbacks include reduced needle sharpness during replication.
“Our approach allows us to directly 3D print the microneedles, which gives us lots of design latitude for making the best microneedles from a performance and cost point-of-view,” Tian said.
The microneedle patches were 3D printed at Carolina using a CLIP prototype 3D printer that DeSimone invented and is produced by CARBON, a Silicon Valley company he co-founded.
The team of microbiologists and chemical engineers are continuing to innovate by formulating RNA vaccines, like the Pfizer and Moderna COVID-19 vaccines, into microneedle patches for future testing.
“One of the biggest lessons we’ve learned during the pandemic is that innovation in science and technology can make or break a global response,” DeSimone said. “Thankfully we have biotech and health care workers pushing the envelope for us all.”
Original Article: A 3D printed vaccine patch offers vaccination without a shot
More from: Stanford University | University of North Carolina at Chapel Hill
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
3D printed vaccine patch
- A Guide to 3D Printing for Healthcare, Today and Tomorrowon May 9, 2024 at 10:02 am
The technology is used by many health systems to create custom implants and models, but how will it be used in medicine as it advances?
- microneedle patchon April 30, 2024 at 5:00 pm
This is the promise of microneedle patches (MNP), which are essentially ... detail the construction and testing of a MNP printer, or microneedle vaccine printer (MVP) that can print dissolving ...
- Patch to protect against measles in children shows promiseon April 29, 2024 at 4:09 pm
A vaccine patch could be a safe and effective alternative way to protect young children against measles, a trial in The Gambia suggests. The device - the size of a sticking plaster - is easier to ...
- Patch to protect against measles in children shows promiseon April 28, 2024 at 5:00 pm
A vaccine patch could be a safe and effective alternative way to protect young children against measles, a trial in The Gambia suggests. The device - the size of a sticking plaster - is easier to ...
- These 3D-printed homes take just 4 days to build — here’s how they could solve one state’s massive housing shortageon October 7, 2023 at 2:48 am
A recyclable 3D-printed home made from natural materials has been revealed to the public, and this may only be the beginning. The design is part of a project to create a “factory of the future ...
Go deeper with Google Headlines on:
3D printed vaccine patch
[google_news title=”” keyword=”3D printed vaccine patch” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Vaccine patch
- Microarray patches safe and effective for vaccinating children: Lanceton May 7, 2024 at 8:00 am
The phase 1/2 randomized trial compared results from the measles and rubella vaccine delivered by a microarray patch, a small sticking plaster-like device with an array of microscopic ...
- Plaster-like vaccine patches may one day replace measles and rubella jabs, research showson April 30, 2024 at 4:35 am
A plaster-like vaccine patch could be a safe and effective alternative to injected measles and rubella immunisations, new research shows.
- Painless Skin Patch Could Deliver Vaccines to Kidson April 30, 2024 at 3:13 am
Kids who don’t like vaccination shots might soon have an alternative in a painless skin patch, researchers say.More ...
- Vaccine plasters could spell the end for childhood jabson April 30, 2024 at 2:33 am
Childhood vaccines could soon be given painlessly in the form of plasters delivered in the post instead of jabs at the GP.
- Painless Skin Patch Could Deliver Vaccines to Kidson April 30, 2024 at 12:37 am
More than 90% of infants received full protection from measles and 100% from rubella after receiving a single vaccine patch The patches bear microscopic needles that painlessly penetrate the skin ...
Go deeper with Google Headlines on:
Vaccine patch
[google_news title=”” keyword=”vaccine patch” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]