Schematic of the skin and bone bioprinting process. After scanning, the bone and then skin layers are bioprinted creating a layered repair with bone, a barrier layer, and dermis and epidermis.
IMAGE: Ozbolat laboratory, Penn State
Fixing traumatic injuries to the skin and bones of the face and skull is difficult because of the many layers of different types of tissues involved, but now, researchers have repaired such defects in a rat model using bioprinting during surgery, and their work may lead to faster and better methods of healing skin and bones.
“This work is clinically significant,” said Ibrahim T. Ozbolat, Hartz Family Career Development Associate Professor of Engineering Science and Mechanics, Biomedical Engineering and Neurosurgery, Penn State. “Dealing with composite defects, fixing hard and soft tissues at once, is difficult. And for the craniofacial area, the results have to be esthetically pleasing.”
Currently, fixing a hole in the skull involving both bone and soft tissue requires using bone from another part of the patient’s body or a cadaver. The bone must be covered by soft tissue with blood flow, also harvested from somewhere else, or the bone will die. Then surgeons need to repair the soft tissue and skin.
Ozbolat and his team used extrusion bioprinting and droplet bioprinting of mixtures of cells and carrier materials to print both bone and soft tissue. They report their results in Advanced Functional Materials.
“There is no surgical method for repairing soft and hard tissue at once,” said Ozbolat. “This is why we aimed to demonstrate a technology where we can reconstruct the whole defect — bone to epidermis — at once.”
The researchers attacked the problem of bone replacement first, beginning in the laboratory and moving to an animal model. They needed something that was printable and nontoxic and could repair a 5-millimeter hole in the skull. The “hard tissue ink” consisted of collagen, chitosan, nano-hydroxyapatite and other compounds and mesenchymal stem cells — multipotent cells found in bone marrow that create bone, cartilage and bone marrow fat.
The hard tissue ink extrudes at room temperature but heats up to body temperature when applied. This creates physical cross-linkage of the collagen and other portions of the ink without any chemical changes or the necessity of a crosslinker additive.
The researchers used droplet printing to create the soft tissue with thinner layers than the bone. They used collagen and fibrinogen in alternating layers with crosslinking and growth enhancing compounds. Each layer of skin including the epidermis and dermis differs, so the bioprinted soft tissue layers differed in composition.
Experiments repairing 6 mm holes in full thickness skin proved successful. Once the team understood skin and bone separately, they moved on to repairing both during the same surgical procedure.
“This approach was an extremely challenging process and we actually spent a lot of time finding the right material for bone, skin and the right bioprinting techniques,” said Ozbolat.
After careful imaging to determine the geometry of the defect, the researchers laid down the bone layer. They then deposited a barrier layer mimicking the periosteum, a heavily vascularized tissue layer that surrounds the bone on the skull.
“We needed the barrier to ensure that cells from the skin layers didn’t migrate into the bone area and begin to grow there,” said Ozbolat.
After laying down the barrier, the researchers printed the layers of dermis and then the epidermis.
“It took less than 5 minutes for the bioprinter to lay down the bone layer and soft tissue,” said Ozbolat.
The researchers performed more than 50 defect closures and achieved 100% closure of soft tissue in four weeks. The closure rate for bone was 80% in six weeks, but Ozbolat noted that even with harvested bone replacement, bone closure usually does not reach 100% in six weeks.
According to Ozbolat, blood flow to the bone is especially important and inclusion of vascularizing compounds is a next step.
The researchers also want to translate this research to human applications and are continuing to work with neurosurgeons, craniomaxillofacial surgeons and plastic surgeons at Penn State Hershey Medical Center. They operate a larger bioprinting device on larger animals.
Original Article: Skin and bones repaired by bioprinting during surgery
More from: Pennsylvania State University | Kyung Hee University | Washington State University
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Bioprinting skin and bone
- A Guide to 3D Printing for Healthcare, Today and Tomorrow
The technology is used by many health systems to create custom implants and models, but how will it be used in medicine as it advances?
- Foo Fighters' 'Skin and Bones' is a live look at an old body of work
Instead of doing a typical "greatest hits" compilation, Grohl opted for a live album, this time: "Skin and Bones." An accompanying DVD will be released Nov. 28. Originating from Seattle, the Foo ...
- White phosphorus 'burns to the bone'
It causes skin to melt away from the bone and can break down a victim's jawbone, but white phosphorus - known in Vietnam as Willie Pete - is still used by sections of the world's military.
- 3D-bioprinted blood vessel to reveal microgravity effect on astronauts
experts from Europe came together to discuss the benefits of applying 3D bioprinting and regenerative medicine to space. A year later, the ESA project produced its first bioprinted skin and bone ...
- Bioprinting News and Research
Fat tissue holds the key to 3D printing layered living skin and potentially hair follicles ... human cardiac tissues using FRESH™ 3D bioprinting. FluidForm Bio, a leader in developing life ...
Go deeper with Google Headlines on:
Bioprinting skin and bone
[google_news title=”” keyword=”bioprinting skin and bone” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Bioprinting
- New technique bioprints live cells inside the body using ultrasonic waves
Revolutionary acousto-printing method can be used to circumvent invasive surgery, and has a wide array of potential applications.
- 3D Bioprinting Market Expected to Hit USD 6.9 Billion by 2032 | Market.Us
According to a recent report by Market.us, the Global 3D Bioprinting Market size is expected to be worth around USD 6.9 Billion by 2032 from USD 1.9 Billion in 2023, growing at a CAGR of 16.1% during ...
- 3D printing and bioprinting in healthcare - statistics and facts
Bioprinting is a much newer technology compared to 3D printing and uses bioinks and other biomaterials to create organ-like structures. Some have referred to bioprinting as ‘healthcare’s next ...
- Advancing gastric cancer treatment through personalized 3D bioprinting
By using 3D bioprinting to accurately replicate the biological environment surrounding gastric cancer cells, the researchers have achieved a significant feat—predicting a patient's response to ...
- Bioprinting News and Research
FluidForm Bio, a leader in developing life-like human tissue to treat disease, shares recent advancements in building human cardiac tissues using FRESH™ 3D bioprinting. FluidForm Bio ...
Go deeper with Google Headlines on:
Bioprinting
[google_news title=”” keyword=”bioprinting ” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]