It all starts with a translucent liquid. Then, as if by magic, darker spots begin to form in the small, spinning container until, barely half a minute later, the finished product takes shape. This groundbreaking 3D-printing method, developed by researchers at EPFL’s Laboratory of Applied Photonics Devices (LAPD), can be used to make tiny objects with unprecedented precision and resolution – all in record time. The team has published its findings in the journal Nature Communications, and a spin-off, Readily3D, has been set up to develop and market the system.
The technology could have innovative applications in a wide range of fields, but its advantages over existing methods – the ability to print solid parts of different textures – make it ideally suited for medicine and biology. The process could be used, for instance, to make soft objects such as tissue, organs, hearing aids and mouthguards.
“Conventional 3D printing techniques, known as additive manufacturing, build parts layer by layer,” explains Damien Loterie, the CEO of Readily3D. “The problem is that soft objects made that way quickly fall apart.” What’s more, the process can be used to make delicate cell-laden scaffolds in which cells can develop in a pressure-free 3D environment. The researchers teamed up with a surgeon to test 3D-printed arteries made using the technique. “The trial results were extremely encouraging,” says Loterie.
Hardened by light
The new technique draws on the principles of tomography, a method used mainly in medical imaging to build a model of an object based on surface scans.
The printer works by sending a laser through the translucent gel – either a biological gel or liquid plastic, as required. “It’s all about the light,” explains Paul Delrot, Readily3D’s CTO. “The laser hardens the liquid through a process of polymerization. Depending on what we’re building, we use algorithms to calculate exactly where we need to aim the beams, from what angles, and at what dose.”
The system is currently capable of making two-centimeter structures with a precision of 80 micrometers, about the same as the diameter of a strand of hair. But as the team develops new devices, they should be able to build much bigger objects, potentially up to 15 centimeters. “The process could also be used to quickly build small silicone or acrylic parts that don’t need finishing after printing,” says Christophe Moser, who heads the LAPD. Interior design could be a potentially lucrative market for the new printer.
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
3D printing
- ISRO’s PSLV: PS4 Engine Reimagined with 3-D Printing Tech
The test lasted 665 seconds and involved the utilization of the PS4 engine, which is part of the PSLV upper stage ...
- Breaking Boundaries: SUNLU Unveils Diverse 3D Printing Material Innovations at TCT Asia 2024
ZHONGSHAN, China, May 11, 2024 /PRNewswire/ -- From May 7th to May 9th, 2024, TCT ASIA 2024 was held at the National Exhibition and Convention Center in Shanghai. As a global summit for 3D printing ...
- What happened to 3D printing stocks?
In this piece, we will take a look at the performance and developments surrounding 3D printing stocks. A big reasons Apple Inc. (NASDAQ:AAPL) is widely credited to be one of the most advanced personal ...
- What happened to 3D printing stocks? Top 5 Stocks
3D Systems Corporation (NYSE:DDD) is another 3D printing penny stock. It is a pure play additive manufacturing hardware and software provider that sells printers, software, and other associated ...
- Three Wayne teens accused of 3D printing and selling guns
Three teens from Wayne County have been arrested following an extensive investigation by the New York State Police Bureau of Criminal Investigation. Oakley S. Billings, Nicholas D. Frizelle, and Colin ...
Go deeper with Google Headlines on:
3D printing
[google_news title=”” keyword=”3D printing” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Additive manufacturing
- ISRO achieves milestone with Additive Manufactured Liquid Engine
ISRO marks a significant milestone by conducting successful hot testing of a liquid rocket engine manufactured through Additive Manufacturing (AM) technology.
- ISRO successfully tests PS4 engine re-designed using additive manufacturing techniques
ISRO achieved a significant milestone on May 9, 2024, with the successful hot testing of a liquid rocket engine that was manufactured using Additive Manufacturing (AM) technology. The engine, which ...
- ISRO successfully tests liquid rocket engine produced using additive manufacturing technology
The Indian Space Research Organisation ISRO achieved a milestone with the successful hot testing of a liquid rocket engine produced using Additive Manufacturi ...
- Catching additive manufacturing defects with nanoseconds to spare
The United States is on the cusp of a manufacturing renaissance. Federal legislation has ushered in billions of dollars of investment in manufacturing capabilities that will streamline the supply ...
- ISRO successfully conducts long-duration hot tests of Additive Manufactured Liquid Engine
ISRO successfully tests liquid rocket engine using 3D printing technology, reducing parts, weld joints, and production time significantly.
Go deeper with Google Headlines on:
Additive manufacturing
[google_news title=”” keyword=”additive manufacturing” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]