Researchers in Oregon State University’s College of Engineering have taken a key step toward the rapid manufacture of flexible computer screens and other stretchable electronic devices, including soft robots.
The advance by a team within the college’s Collaborative Robotics and Intelligent Systems Institute paves the way toward the 3D printing of tall, complicated structures with a highly conductive gallium alloy.
Researchers put nickel nanoparticles into the liquid metal, galinstan, to thicken it into a paste with a consistency suitable for additive manufacturing.
“The runny alloy was impossible to layer into tall structures,” said Yi?it Mengüç, assistant professor of mechanical engineering and co-corresponding author on the study. “With the paste-like texture, it can be layered while maintaining its capacity to flow, and to stretch inside of rubber tubes. We demonstrated the potential of our discovery by 3D printing a very stretchy two-layered circuit whose layers weave in and out of each other without touching.”
Findings were recently published in Advanced Materials Technologies.
Gallium alloys are already being used as the conductive material in flexible electronics; the alloys have low toxicity and good conductivity, plus they’re inexpensive and “self-healing” – able to attach back together at break points.
But prior to the modification developed at OSU, which used sonication – the energy of sound – to mix the nickel particles and the oxidized gallium into the liquid metal, the alloys’ printability was restricted to 2-dimensional.
For this study, researchers printed structures up to 10 millimeters high and 20 millimeters wide.
“Liquid metal printing is integral to the flexible electronics field,” said co-author Do?an Yirmibe?o?lu, a robotics Ph.D. student at OSU. “Additive manufacturing enables fast fabrication of intricate designs and circuitry.”
The field features a range of products including electrically conductive textiles; bendable displays; sensors for torque, pressure and other types of strain; wearable sensor suits, such as those used in the development of video games; antennae; and biomedical sensors.
“The future is very bright,” Yirmibe?o?lu said. “It’s easy to imagine making soft robots that are ready for operation, that will just walk out of the printer.”
The gallium alloy paste demonstrates several features new to the field of flexible electronics, added co-corresponding author Uranbileg Daalkhaijav, Ph.D. candidate in chemical engineering.
“It can be made easily and quickly,” Daalkhaijav said. “The structural change is permanent, the electrical properties of the paste are comparable to pure liquid metal, and the paste retains self-healing characteristics.”
Future work will explore the exact structure of the paste, how the nickel particles are stabilized, and how the structure changes as the paste ages.
Learn more: Modified, 3D-printable alloy shows promise for flexible electronics, soft robots
The Latest on: Liquid metal printing
[google_news title=”” keyword=”liquid metal printing” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Liquid metal printing
- Cobra's 3D-printed Limit3d Ironson May 14, 2024 at 11:28 am
Cobra has used 3D printing to create pieces of putters for a few years and quietly 3D printing wedges for staff players like Rickie Fowler and Gary Woodland. However, the 500 sets of Limit3d irons are ...
- ISRO Successfully Tests 3D Printed Rocket Engine, Made by Wipro's 3D Printing Biz Uniton May 12, 2024 at 10:39 pm
ISRO has achieved a significant milestone with the successful hot testing of a liquid rocket engine manufactured using 3D printing technology. This is ...
- What is a 3D-printed rocket engine? 7 points to know after successful ISRO teston May 11, 2024 at 9:26 pm
The Indian Space Research Organisation (ISRO) successfully conducted a rocket engine test on Friday in Tamil Nadu at ISRO Propulsion Complex, Mahendragiri.
- How does ISRO's 3D-printed rocket compare with other international 3D rockets?on May 11, 2024 at 4:44 am
The Indian Space Research Organisation (ISRO) successfully carried out a critical test on a 3D-printed liquid rocket engine on Friday. This test marked a significant advancement in incorporating ...
- Researchers discover spontaneous liquefaction of solid metal–liquid metal interfaces in colloidal binary alloyson May 6, 2024 at 7:37 am
The boundary between solid metal and liquid metal can be much less "solid" than we ever suspected. RMIT researchers have discovered that the liquid-solid boundary can fluctuate back and forth, with ...
- Scientists Grow Diamonds In Minutes Using Liquid Metalon April 25, 2024 at 8:22 pm
But researchers have developed a new method using a special liquid metal mix that can grow diamonds in just 150 minutes, all at normal atmospheric pressure. This new technique eliminates the need ...
- Liquid metal breakthrough: Scientists unlock potential for flexible electronicson June 9, 2023 at 8:59 am
Previous attempts have been impeded by liquid metal's extremely high tension ... To overcome the issue, a strategy called 'transfer printing' has been tried which involves using a third material.
- Additive Manufacturing For Batteries Of The Future: Will 3D Printing Transform Battery Making?on January 30, 2023 at 5:53 am
The company says the technology will be 30% cheaper than traditional battery manufacturing and can be used for both liquid-electrolyte and solid-state batteries. 3D screen printing uses a metal ...
- 3D-Printed Rockets Set To Blast Offon June 30, 2022 at 9:31 am
U.S. Space Force said: “Launcher’s E-2 liquid rocket engine has the potential ... the AMCM M4K-4 metal printing platform from EOS, which came out in 2021. The company has also used metal ...
via Bing News