Introducing a simple step to the production of plant-derived, biodegradable plastic could improve its properties while overcoming obstacles to manufacturing it commercially, says new research from the University of Nebraska-Lincoln and Jiangnan University.
That step? Bringing the heat.
Nebraska’s Yiqi Yang and colleagues found that raising the temperature of bio-plastic fibers to several hundred degrees Fahrenheit, then slowly allowing them to cool, greatly improved the bio-plastic’s normally lackluster resistance to heat and moisture.
Its thermal approach also allowed the team to bypass solvents and other expensive, time-consuming techniques typically needed to manufacture a commercially viable bio-plastic, the study reported.
Yang said the approach could allow manufacturers of corn-derived plastic – such as a Cargill plant in Blair – to continuously produce the biodegradable material on a scale that at least approaches petroleum-based plastic, the industry standard. Recent research estimates that about 90 percent of U.S. plastic goes unrecycled.
“This clean technology makes possible (the) industrial-scale production of commercializable bio-based plastics,” the authors reported.
Not easy being green
The approach uses polylactic acid, or polylactide, a component of biodegradable plastic that can be fermented from corn starch, sugarcane and other plants. Though most plastics are made from petroleum, polylactide has emerged as an environmentally friendlier alternative.
Yet polylactide’s susceptibility to heat and moisture, particularly during the manufacturing process, has limited its use in textiles and other industries. In searching for ways to address the issue, researchers long ago discovered that mixing mirror-image polylactide molecules – generally referred to as “L” and “D” – could yield stronger molecular interactions and better performance than using just the L or D alone.
But there was another catch. Convincing a reasonable proportion of the L and D molecules to permanently pair up is difficult, often forcing researchers to concoct costly and complicated matchmaking schemes. Some of the most common involve the use of solvents or other chemical agents whose disposal can cause environmental issues of their own.
“The problem is that people couldn’t find a way to make it work so that you could use it on large scales,” said Yang, Charles Bessey Professor of biological systems engineering and of textiles, merchandising and fashion design. “People use nasty solvent or other additives. But those are not good for continuous production.
“We don’t want to dissolve the polymers and then try to evaporate the solvents, and then have to consider reusing them. That’s just too expensive (and) not realistic.”
Heating up
Yang and his colleagues decided to pursue another approach. After mixing pellets of the L and D polylactide and spinning them into fibers, the team rapidly heated them to as hot as 400 degrees Fahrenheit.
The resulting bio-plastic resisted melting at temperatures more than 100 degrees higher than did plastics containing only the L or D molecules. It also maintained its structural integrity and tensile strength after being submersed in water at more than 250 degrees, approximating the conditions that bio-plastics must endure when being incorporated into dyed textiles.
The textile industry produces about 100 million tons of fibers annually, Yang said, meaning that a feasible green alternative to petroleum-based manufacturing could pay off both environmentally and financially.
“So we just used a cheap way that can be applied continuously, which is a big part of the equation,” Yang said. “You have to be able to do it continuously in order to have large-scale production. Those are important factors.”
Though the team has demonstrated continuous production on a smaller scale in Yang’s lab, he said it will soon ramp up to further illustrate how the approach might be integrated into existing industrial processes.
Learn more: Huskers bring the heat to improve biodegradable plastics
The Latest on: Bioplastics
[google_news title=”” keyword=”bioplastics” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]- Bioplastics News Streamon May 13, 2024 at 5:00 pm
One of the most dynamic categories in plastics is for bioplastics aka biopolymers and related bio-based materials made from renewable sources. The articles PlasticsToday publishes related to this high ...
- Development of technology for producing bioplastics from agricultural and food byproducts by the World Institute of Kimchion May 13, 2024 at 9:13 am
Hae Choon Chang, President of the World Institute of Kimchi (WiKim) announced on April 22 that the institute has developed a 'bio-refactoring-based upcycling technology' that can convert cabbage ...
- Team develops technology for producing bioplastics from agricultural and food byproductson May 10, 2024 at 10:30 am
As kimchi has been drawing attention as a global healthy food trend, cabbage is one of the representative vegetables used as a main ingredient for manufacturing kimchi overseas.
- Global Bioplastics & Biopolymers Industry Research 2024-2029: Agriculture & Horticulture is Projected to be Fastest-Growing Segmenton May 10, 2024 at 12:45 am
The primary factors driving this market include the growing utilization of bioplastics in packaging, along with heightened government emphasis on green procurement policies and re ...
- Nissei says 'inclusive growth' covers recycling, bioplastics, energy savingson May 9, 2024 at 4:54 am
San Antonio, Texas-based Nissei America Inc. is introducing new injection molding technology to reduce environmental loads while simplifying processes.
- Bioplastic and Biopolymer: A Sustainable Solution with Lucrative Potential – Market to Reach USD 98 Billion by 2034on May 9, 2024 at 2:33 am
The bioplastic and biopolymer market is anticipated to reach a valuation of USD 16.8 billion in 2024. The industry is projected to be worth USD 98 billion by 2034, expanding at a CAGR of 19.3% between ...
- Revolutionizing the Automotive Industry: Bioplastics Market Set to Soar to US$ 2,103.28 million by 2033on May 8, 2024 at 7:02 am
The global automotive bioplastics market value is likely to jump from US$ 761.06 million in 2023 to US$ 2,103.28 million by 2033. This estimated growth is expected to be driven by a CAGR of 10.7% in ...
- Should Bioplastics Be Allowed in Organic Compost?on April 28, 2024 at 5:00 pm
BPI submitted the petition to the USDA on behalf of its members, who include composters, municipalities, and compostable product manufacturers, such as top bioplastics producers BASF, Eastman, Corbion ...
- The rise of the eco-warriors: Bioplastics and a sustainable futureon April 24, 2024 at 5:00 pm
This dream is inching closer to reality thanks to innovations in bioplastic technology, particularly with the exciting potential of bioplastics derived from agricultural waste, including fast ...
- Bioplastics as toxic as regular plastics; both need regulation, say researcherson April 22, 2024 at 1:26 pm
Almost 25 years after their hopeful debut, bioplastics contribute only about 1% of the global plastics market share, mainly for food packaging. But that may soon change. The Biden administration ...
via Google News and Bing News