New technology converts exhaust heat into electricity for vehicles and other applications. Prof. Son’s team has developed liquid-like TE materials that can be painted on almost any surface.
A new study, led by Professor Jae Sung Son of Materials Science and Engineering at UNIST has succeeded in developing a new technique that can be used to turn industrial waste heat into electricity for vehicles and other applications.
In their study, the team presented a new type of high-performance thermoelectric (TE) materials that possess liquid-like properties. These newly developed materials are both shape-engineerable and geometrically compatible in that they can be directly brush-painted on almost any surface.
Scientists hope that their findings, described in the prestigious journal Nature Communications this week, will pave the way to designing materials and devices that can be easily transferred to other applications.
The thermoelectric effect is the direct conversion of temperature differences to electric voltage and vice versa. This effect can be used either for heating or for cooling, such as in small cooling systems, automotive cooling systems, as well as waste heat recovery system for ships. In addition, the thermoelectric generator modules used in these devices are configured as rectangular parallelepipeds.
The output power of thermoelectric generators depends on device engineering minimizing heat loss, as well as inherent material properties. According to the research team, the currently existing liquid-like TE materials have been largely neglected due to the limited flat or angular shape of devices.
However, considering that the surface of most heat sources where these planar devices are attached is curved, a considerable amount of heat loss is inevitable. To address this issue, the research team presented the shape-engineerable thermoelectric painting technique where they they directly brush TE paints onto the surface of heat sources to produce electricity.
Using this technique, one can now easily achive electricity via the application of TE paints on the exterior surfaces of buildings, roofs, and cars. Scientists hope that their findings, described in the prestigious journal Nature Communications this week, will pave the way to designing materials and devices that can be easily transferred to other applications.
To show the feasibility of the currently proposed technology, they also fabricated TE generators through painting TE paints on flat, curved and large-sized hemispherical substrates, demonstrating that it is the most effective means of heat energy collection from any heat sources with exceedingly high output power density of 4.0?mW?cm?2, which is the best value among the reported printed TE generators.
“By developing integral thermoelectric modules through painting process, we have overcome limitations of flat thermoelectric modules and are able to collect heat energy more efficiently.” said Professor Son. “Thermoelectric generation systems can be developed as whatever types user want and cost from manufacturing systems can also be greatly reduced by conserving materials and simplifying processes..”
“Our thermoelectric material can be applied any heat source regardless of its shape, type and size.” said Professor Son. “It will place itself as a new type of new and renewable energy generating system.”
Learn more: UNIST Engineers Thermoelectric Material in Paintable Liquid Form
[osd_subscribe categories=’thermoelectric’ placeholder=’Email Address’ button_text=’Subscribe Now for any new posts on the topic “THERMOELECTRIC”‘]
Receive an email update when we add a new THERMOELECTRIC article.
The Latest on: Thermoelectric materials
[google_news title=”” keyword=”thermoelectric materials” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Thermoelectric materials
- Band Convergence Calculations Unlock High-Performance Thermoelectric Materialon May 17, 2024 at 1:37 pm
In a recent study published in the journal Science, researchers from the University of Houston along with Rice University found ways to predict band convergence in different materials.
- Maths converges on a better thermoelectric materialon May 17, 2024 at 7:26 am
A University of Houston designer p-type thermoelectric material has shown >10% conversion efficiency at a temperature difference of 475K. It is a ...
- A powerful tool speeds success in achieving highly efficient thermoelectric materialson May 17, 2024 at 5:41 am
Thermoelectric materials could play an important role in the clean energy transition, as they can produce electricity from sources of heat that would otherwise go to waste. Researchers report a new ...
- Powerful New Tool Succeeds in Achieving Highly Efficient Thermoelectric Materialson May 17, 2024 at 1:25 am
To efficiently predict how to create the most effective material, the researchers used a high-entropy Zintl alloy, YbxCa1-xMgyZn2-ySb2, as a case study, designing a series of compositions through ...
- Thermoelectric materials approach boosts band convergence to avoid time-consuming trial-and-error approachon May 16, 2024 at 1:26 pm
Thermoelectric materials could play an important role in the clean energy transition, as they can produce electricity from sources of heat that would otherwise go to waste without generating ...
- Exceptionally large transverse thermoelectric effect produced by combining thermoelectric and magnetic materialson May 13, 2024 at 1:00 pm
A NIMS research team has demonstrated for the first time ever that a simple stack of thermoelectric and magnetic material layers can exhibit a substantially larger transverse thermoelectric ...
- Transforming common soft magnets into next-generation thermoelectric conversion materials with 3-minute heat treatmenton May 10, 2024 at 7:29 am
A research team from NIMS and Nagoya University has demonstrated that an iron-based amorphous alloy, widely used as a soft magnetic material in transformers and motors, can be transformed into a ...
- Transforming common soft magnets into a next-generation thermoelectric conversion materials by 3 minutes heat treatmenton May 9, 2024 at 3:43 pm
A research team has demonstrated that an iron-based amorphous alloy, widely used as a soft magnetic material in transformers and motors, can be transformed into a 'transverse' thermoelectric ...
- It May be Possible to Power Implantable Generators with Our Bodieson May 3, 2024 at 7:30 am
Researchers are trying to solve the problem of powering implantable devices to help improve and save lives.
via Bing News