New rapid method expands the types of metals, alloys, and architectures that can be additively manufactured
A team of Northwestern Engineers has created a new way to print three-dimensional metallic objects using rust and metal powders.
While current methods rely on vast metal powder beds and expensive lasers or electron beams, Northwestern’s new technique uses liquid inks and common furnaces, resulting in a cheaper, faster, and more uniform process. The Northwestern team also demonstrated that the new method works for an extensive variety of metals, metal mixtures, alloys, and metal oxides and compounds.
“This is exciting because most advanced manufacturing methods being used for metallic printing are limited as far as which metals and alloys can be printed and what types of architecture can be created,” said Ramille Shah, assistant professor of materials science and engineering in the McCormick School of Engineering and of surgery in the Feinberg School of Medicine, who led the study. “Our method greatly expands the architectures and metals we’re able to print, which really opens the door for a lot of different applications.”
Conventional methods for 3-D printing metallic structures are both time and cost intensive. The process takes a very intense energy source, such as a focused laser or electron beam, that moves across a bed of metal powder, defining an object’s architecture in a single layer by fusing powder particles together. New powder is placed on top on the previous layer, and these steps are repeated to create a 3-D object. Any unfused powder is subsequently removed, which prevents certain architectures, such as those that are hollow and enclosed, from being created. This method is also significantly limited by the types of compatible metals and alloys that can be used.
Northwestern Engineering’s new method completely bypassed the powder bed and energy beam approach as well as uncouples the two-step process of printing the structure and fusing its layers. By creating a liquid ink made of metal or mixed metal powders, solvents, and an elastomer binder, Shah was able to rapidly print densely packed powder structures using a simple syringe-extrusion process, in which ink dispenses through a nozzle, at room temperature.
Despite starting with a liquid ink, the extruded material instantaneously solidifies and fuses with previously extruded material, enabling very large objects to be quickly created and immediately handled. Then, with collaborator David Dunand, the James N. and Margie M. Krebs Professor of Materials Science and Engineering, the team fused the powders by heating the structures in a simple furnace in a process called sintering, where powders merge together without melting.
By uncoupling the printing and the sintering, it appears that we have complicated the process,” Dunand said. “But, in fact, it has liberated us as each step is much easier separately than the combined approach.”
The research is described in a paper published last month in the journal Advanced Functional Materials. Adam Jakus, a postdoctoral fellow in Shah’s laboratory who was supported by a Department of Defense fellowship, and Shannon L. Taylor, a graduate student co-advised by Shah and Dunand who is supported by a National Science Foundation graduate fellowship, served as co-first authors. Undergraduate Nicholas R. Geisendorfer also co-authored the paper.
The team imagines that many disciplines could benefit from customized, quickly printed metals. The new method could be used for printing batteries, solid-oxide fuel cells, medical implants, and mechanical parts for larger structures, such as rockets and airplanes. It could also be used for on-site manufacturing that bypasses the sometimes slow-moving supply chain.
The researchers’ unique 3-D inks and process open doors for more sophisticated and uniform architectures that are faster to create and easier to scale up. After the object is printed but before it is densified by heating, the structure, called a “green body,” is flexible due to the elastic polymer binder containing unbonded metallic powders.
“We used a biomedical polymer that is commonly used in clinical products, such as sutures,” Shah explained. “When we use it as a binder, it makes green bodies that are very robust despite the fact that they still comprise a majority of powder with very little binder. They’re foldable, bendable, and can be hundreds of layers thick without crumbling. Other binders don’t give those properties to resulting 3-D printed objects. Ours can be manipulated before being fired. It allows us to create a lot of different architectures that haven’t really been seen in metal 3-D printing.”
Heating the completed green bodies in a furnace where all parts of the structure densify simultaneously also leads to more uniform structures. In traditional methods that scan powder beds with a laser, the heat is localized. As powder is added on layer by layer, more heat is applied, which can create localized heating and cooling stresses, leading to undesirable microstructures and, ultimately, suboptimal properties. Using a furnace, however, ensures uniform temperature, resulting in structures that sinter uniformly without warping or cracking.
“To me, as a metallurgist, I’m amazed that the structure does not deform or break apart, despite shrinking extensively during densification,” Dunand said. “That is not something that I see often.”
Instead of one laser slowly working its way across a large powder bed, Shah and Dunand’s method can use many extrusion nozzles at one time. Their method potentially can quickly 3-D print full sheets that are meters wide and can be folded into large structures. The only limitation is the size of the furnace.
Another innovative component of their process is that it can be used to print metal oxides, such as iron oxide (rust), which can then be reduced into metal. Rust powder is lighter, more stable, cheaper, and safer to handle than pure iron powders. Shah and Dunand’s team discovered that they could first 3-D print structures with rust and other metallic oxides and then use hydrogen to turn the green bodies into the respective metal before sintering in the furnace.
“It might seem like we are needlessly complicating things by adding a third reduction step where we turn rust into iron,” Dunand said. “But this opens up possibilities for using very cheap oxide powders rather than corresponding expensive metal powders. It’s hard to find something cheaper than rust.”
Read more: A New Way to Print 3-D Metals and Alloys
The Latest on: 3-D metal printing
[google_news title=”” keyword=”3-D metal printing” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: 3-D metal printing
- Eplus3D introduces EP-M2050 metal 3D printing system with optional configuration of 64 laserson May 9, 2024 at 7:12 am
Eplus3D has launched its EP-M2050 metal additive manufacturing system, a 36-laser platform which can be extended to 49 or 64 lasers.
- Bright Laser Technologies unveils updated BLT-S450 metal 3D printer at TCT Asia 2024on May 9, 2024 at 6:12 am
BLT, who recently reported a 78% year on year increase in net profit for 2023, says the S450 boasts improvements to cost efficiency, quality, automation and safety.
- NREL Advances Sustainable Marine Energy Technology With 3D Printingon May 6, 2024 at 7:00 am
NREL researchers have partnered with the Pacific Northwest National Laboratory to explore 3D printing's potential in marine energy technology.
- Shhh! 3 Secret 3D Printing Stocks Flying Below Wall Street’s Radaron May 1, 2024 at 3:30 am
InvestorPlace - Stock Market News, Stock Advice & Trading Tips One of the best investment strategies for long-term growth is twofold: pick an ...
- 3 3D Printing Stocks With the Potential to Make You an Overnight Millionaireon April 30, 2024 at 4:07 am
Not too long ago, analysts and early adopters touted the technology of 3D printing as the future of manufacturing. Then came market corrections and concerns surrounding the feasibility of long-term ...
- Stratasys and Desktop Metal to combine in all-stock deal valued at about $1.8 billion that will create new player in 3-D printing spaceon May 25, 2023 at 3:51 am
Stratasys Ltd. and Desktop Metal Inc. said Thursday they have agreed to combine in an all-stock deal valued at about $1.8 billion that will create a new company in the 3-D printing space.
- 6 New 3-D Printers With Game-Changing Capabilitieson May 23, 2023 at 1:59 pm
The 3-D metal printer benefits from HP’s Thermal InkJet printhead, which the company said “dramatically improves the printing speed, part quality and repeatability.” The other key advantages ...
- 5 Big 3-D Printing Trends To Watch In 2021on April 23, 2021 at 8:20 am
One key area of innovation in the 3-D printing space is within metal 3-D printing, where companies including Markforged, Desktop Metal and HP Inc. are among the key players. “There are a lot of ...
- Metal 3D Printing Is In The Headlines, But Who’s Actually Using It?on September 8, 2020 at 8:52 am
But what is it about Desktop Metal — and about metal 3D printing — that makes it so intriguing from a customer perspective? Many of the potential users of such technology are already well ...
- Metal 3D Printing — A Dose Of Realityon April 8, 2019 at 4:44 am
We have no doubt that hundreds of times a day a hacker is watching a 3D printer spew hot plastic and fantasizes about being able to print directly using metal. While metal printers are more common ...
via Bing News