3D printing, or additive manufacturing, is the process of turning a 2D digital image into a 3D object through printing successive layers of materials until an entire item is created.
Initial images are created in design software programmes before being realised through 3D printing.
The advent of consumer 3D printing has the potential to revolutionise its use as a technology, but also opens up a whole host of intellectual property (IP) debates.
Dr Dinusha Mendis’ research into the intellectual property issues around 3D printing stemmed from a personal interest in the latest technological advances. As Dr Mendis says: “While 3D printing was first developed more than 30 years ago, its expansion into consumer printing is revolutionary. Moving into the consumer market means it is developing rapidly as a technology, which opens up all sorts of questions around intellectual property rights and copyright.”
The IP laws in the UK were created long before 3D printing, or any of its associated technologies came about, which means that legislation often lags behind the issues being faced by UK consumers and businesses. It leads to a number of grey areas, many of which Dr Mendis has tackled in her recent research for the UK Intellectual Property Office, in collaboration with Econolyst, the leading 3D printing and additive manufacturing company in the UK.
As a technology, 3D printing has the potential to impact on a vast number of markets, ranging from toys and games for consumers, to personalised health equipment such as hearing aids, through to highly specialised parts to be used in aircraft. Its variety of uses also means that the potential impact on existing intellectual property laws is difficult to predict.
For example, what would be the copyright implications be if an individual modified an existing design file or scanned an existing object to create a new design file? Can computer-aided design (CAD) files be protected under copyright law? What are the implications of modifying someone else’s CAD file? For businesses, copyright issues could arise when replacement parts are produced, perhaps through a thirdparty supplier.
“Our research showed that for consumers, the key issue is providing better guidance about the copyright status of CAD files,” explains Dr Mendis. “While online platforms for sharing 3D printing design files are still quite niche, interest in them and activity is increasing year-on-year. For businesses, the implications are unlikely to be felt immediately because the cost of printing replica parts is still relatively high. However, as the technology grows and becomes more widely used – particularly in the automotive industry – its effects need to be monitored and measured.”
Read more: 3D printing: a technology that could revolutionise our lives
The Latest on: MD printing
[google_news title=”” keyword=”3D printing” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: 3D printing
- World’s first 3D-printed wedding dress took nearly a month to make: ‘Masterpiece’on May 17, 2024 at 10:46 am
Mariana Pavani walked down the aisle in a custom couture gown that marked a big day, not just for the bride, but for fashion history: Dutch designer Iris van Herpen had crafted the lawyer’s new-age 3D ...
- Visa Cash App RB Partners With ROBOZE for 3D Printing Innovation in F1on May 17, 2024 at 7:16 am
The Visa Cash App RB F1 team has announced a partnership with ROBOZE to increase their single-seater performance through 3D printing.
- Carbon Introduces AO Stack, Enhancing 3D Printing Capabilities with Increased Unattended Model Throughput for M2 and M3 Printerson May 17, 2024 at 6:18 am
AO Stack allows Carbon users to produce up to three times more models in a single unattended print cycle, perfect for the last print of the day. This underscores Carbon's commitment to pushing the ...
- 3D printing is changing golf club design forever | Fully Equippedon May 16, 2024 at 5:00 pm
With these irons coming to market soon, we at the Fully Equipped Podcast had a lengthy discussion about how 3D printing has evolved the club design and engineering environment and allowed designers to ...
- KS3/4 Computing: What can 3D printing be used for?on May 16, 2024 at 11:34 am
Professor Danielle George explains how 3D printing works and demonstrates an object being printed in real time.
- Noztek’s Large-Format Conveyor Build Plate for Continuous 3D Printingon May 16, 2024 at 11:29 am
UK-based Noztek announced they’re developing a large-format conveyor-powered build plate for 3D printing. Belt 3D printers were an up and coming thing a couple of years ago, but interest in them has ...
- Researchers 3D print functional brain tissue with commercial bioprinter and a creative methodon May 15, 2024 at 11:06 am
Scientists at the University of Wisconsin-Madison developed a 3D-printed brain tissue that can grow and function like typical brain tissue.
- Bio-based resins could offer recyclable future for 3D printingon May 15, 2024 at 8:00 am
A new type of recyclable resin, made from biosourced materials, has been designed for use in 3D printing applications.
- New revolutionary technique to 3D-print multiple drugs in single tableton May 14, 2024 at 11:22 pm
This targeted release system opens doors for a future of simplified medication schedules. MM-IJ3DP enables the incorporation of multiple drugs into a single tablet. This eliminates the hassle of ...
- Soy biodiesel byproduct could enhance 3D printing industryon May 14, 2024 at 1:32 pm
In a development that could advance the 3D printing industry, researchers at the University of Louisville have discovered a way to transform a significant waste output from soy biodiesel plants into a ...
via Bing News